8S42-100FR-CS8184

Hi-Ratio Cable Breakout Boot Eight Entry Table of Dimensions, inch (mm): PART NUMBER (See Note*) 8S14-50FR 8S42-100FR Note*: Body ID Min. Exp. (A) 2.09 (53) 2.50 (64) Max. Rec’d (B) 0.75 (19) 0.75 (19) Leg ID Min. Exp. (C) 0.62 (16) 0.87 (22) Length Recovered Min Max. Rec’d (D) 0.13 (3) 0.13 (3) (E), Body 2.65 (67) 2.65 (67) Rec’d. Wall Ref (W) 0.10 (2.5) 0.10 (2.5) (F), Leg 1.40 (36) 1.40 (36) Add “NA” to the end of Part Number if no adhesive is required Material: -152, heat shrinkable, crosslinked flexible polyolefin per Mil-I-81765/1A Type II Factory applied sealant: Hot melt adhesive provided on the shrinkable portion of the boot is standard. Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Title: Hi-Ratio Cable Breakout Boot Eight Entry Specification Control Drawing Size A Tyco Electronics reserves the right to amend this UNLESS OTHERWISE SPECIFIED drawing at any time. Users should evaluate the DIMENSIONS ARE IN INCHES. suitability of the product for their application. METRIC DIMENSIONS ARE SHOWN IN BRACKETS Drawn By: Org. Date: Original file: A.. Ng 03/17/03 N/A If this document is printed it becomes uncontrolled. Check for the latest revision. Cage Code Document No. 06090 8SXXX-XXXFR-High-Ratio Rev.: Rev. Date: 25-Mar-03 A File : r030160.doc Scale: None Sheet: 1 of 1