9-1899549-7

RW-16 Heat-shrinkable Elastomeric Polyolefin Tubing to AMS-DTL-23053/16 Specially formulated to meet the requirements of AMS-DTL-23053/16, TE’s RW-16 heat-shrinkable elastomeric polyolefin tubing provides excellent protection against fuels, hydraulic fluid and oils. It is particularly suitable for use in ground vehicle systems which require protection against mechanical abuse and fluids. Key Features: • • • • • • Flame Retarded Formulated for optimum long term heat and fluid resistance Rugged to resist mechanical abuse Shrink ratio 2:1 RoHS compliant Designed to be released to and comply with the requirements of AMS-DTL-23053/16 • Recommended installation shrink temperature is 175˚C • Operating temperature -75˚C to +120˚C • Color: Black RW-16 Heat-shrinkable Elastomeric Polyolefin Tubing to AMS-DTL-23053/16 Typical data Specifications/Approvals Military AMS-DTL-23053/16 TE specification RW-2075 Installation Recommended installation shrink temperature is 175˚C Ordering Information Color Size selection Standard packaging Pack sizes Ordering information Black Always order the largest size that will shrink snugly over the component to be covered On spools Description Pack Size (meters) Part Number RW-16-1/4-0-SP 100 CH16094001 RW-16-3/8-0-SP 100 CH16104001 RW-16-1/2-0-SP 60 CH16114001 RW-16-3/4-0-SP 60 CH16124001 RW-16-1-0-SP 30 CH16134001 RW-16-1-1/2-0-SP 15 CH16144001 Part descriptions are detailed in the Dimensions table below. For pricing, minimum order quantities and lead times, please contact your sales representative Dimensions Size 1/4 3/8 1/2 3/4 1 1-1/2 Part description RW-16-1/4-0-SP RW-16-3/8-0-SP RW-16-1/2-0-SP RW-16-3/4-0-SP RW-16-1-0-SP RW-16-1-1/2-0-SP Inside diameter as supplied (minimum) inches (mm) 0.250 (6.4) 0.375 (9.5) 0.500 (12.7) 0.750 (19.0) 1.00 (25.4) 1.500 (38.0) For more information/technical support: John Kuster, Menlo Park, CA. Phone: +1 (650)361-5384 Fax: +1 (650)361-6098 E-mail: jkuster@te.com Mark Taylor, Swindon, UK Phone: +44 1793 572564 Fax: +44 1793 572597 E-mail: mtaylor@te.com TE Connectivity, TE connectivity (logo) are trademarks. Literature No: 1654428-1 revised March 2011 - PDF only te.com/ADM Inside diameter after unrestricted shrinkage (maximum) inches (mm) 0.125 (3.18) 0.187 (4.75) 0.250 (6.35) 0.375 (9.53) 0.500 (12.7) 0.750 (19.1) Wall thickness after unrestricted shrinkage (nominal) inches (mm) 0.035 (0.889) 0.040 (1.02) 0.048 (1.23) 0.057 (1.45) 0.070 (1.78) 0.095 (2.41)