917497-000

TINEL LOCK RING 3 CODE 40 - TINEL-LOCK BACKSHELL TXR40AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR40AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W, D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PARA. 3. 5. 7. 7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DATE DRAWN K.WINCZURA 04/12/2014 CHECKED 04/12/2014 APPROVED K.SHEPPARD 04/12/2014 APPROVED H.SMITH 15/06/2015 REVISIONS LTR DESCRIPTION J REVISED PER ECO-12-021161 K REVISED PER ECO-15-002200 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 12.04.12 11.02.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED G.WELLS H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR40 K 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 16,80 `0,50 XXXX XXXX ØB A THREAD ØK ØY ØS ØZ A THREAD ØB 26,50 26,50 SILICONE O-RING PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 16,80 `0,50 C F D G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H W 16,80 ` 0,50 M J E T 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 H W 16,80 ` 0,50 M J E T 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DATE DRAWN K.WINCZURA 04/12/2014 CHECKED 04/12/2014 APPROVED K.SHEPPARD 04/12/2014 APPROVED H.SMITH 15/06/2015 REVISIONS LTR DESCRIPTION J REVISED PER ECO-12-021161 K REVISED PER ECO-15-002200 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 12.04.12 11.02.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED G.WELLS H.SMITH 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR40 K 2 MODIFICATION S (SELF-LOCKING COUPLING NUT) 21,60 `0,50 SELF-LOCKING MECHANISM A THREAD 7 ØK ØB 7 SELF-LOCKING MECHANISM A THREAD ØB 7 SELF-LOCKING MECHANISM BACKSHELL - TYPE 1 TABLE 1 ORDER NO. 08 10 12 14 16 18 20 22 24 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE SHELL SIZE A THREAD COM'L / MIL 9/A M12 × 1.0 11 / B M15 × 1.0 13 / C M18 × 1.0 15 / D M22 × 1.0 17 / E M25 × 1.0 M28 × 1.0 19 / F M31 × 1.0 21 / G 23 / H M34 × 1.0 M37 × 1.0 25 / J ØB MAX 18,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 ØB MAX 7 21,5 24,6 28,3 32,4 35,6 38,5 41,7 43,9 47,0 MAX ENTRY 04 07 08 10 12 14 16 18 20 C ±0,5 12,0 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 D ±0,5 26,8 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 W ±0,5 21,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 T ±0,5 14,0 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 E ±0,5 26,20 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 W ±0,5 21,2 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 T ±0,5 16,3 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 E ±0,5 26,4 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 04/12/2014 CHECKED 04/12/2014 APPROVED K.SHEPPARD 04/12/2014 H.SMITH ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 DATE DRAWN K.WINCZURA APPROVED BACKSHELL - TYPE 2 15/06/2015 REVISIONS LTR DESCRIPTION J REVISED PER ECO-12-021161 K REVISED PER ECO-15-002200 ØK MAX NA 21,0 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 12.04.12 11.02.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED G.WELLS H.SMITH ØK MAX 7 NA 24,6 24,6 24,6 28,3 32,4 35,6 38,5 41,7 43,9 47,0 50,0 56,0 F ±0,5 NA 12,5 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 G ±0,5 NA 27,5 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 H ±0,5 NA 24,0 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 M ±0,5 NA 15,5 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 J ±0,5 NA 27,95 27,95 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 H ±0,5 NA 24,3 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 M ±0,5 NA 17,2 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 J ±0,5 NA 28,2 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR40 K 3