929950-2

8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT20 7 6 4 5 1 2 3 20 RELEASED FOR PUBLICATION REVISIONS ALL RIGHTS RESERVED. BY - P LTR A1 A2 A3 A4 1 CONTATCT AREA GOLD PLATED MIN. 0.8µm OVER MIN. 1.3µm Ni- LAYER REST TIN PLATED MIN. 2µm Kontaktzone vergoldet min. 0 0.8µm über min. 1.3µm Ni - Zwischenschicht Rest verzinnt min. 1µm D 18.7 3 Konecny Brunner MAIN VIEW CORRECTED, SEE ECR-06-02121704.09.06 Konecny Brunner ECR-14-006422 18AUG2014 JBJH PJ ECR-15-012070 13AUG2015 JBJH BK 1.2 B 0.35 Max. 0.5mm 4 CURRENT LOADING MAX. 6A AT TU=25 $ C Strombelastung max. 6A bei Tu=25 $ C 6 C B BLADE THICKNESS 0.8± 0.03 DIN 46244 Messerstarke 0.8± 0.03 DIN 46244 7 1.4 5 2.4-0.1 5.1 AFTER CUT-OFF FROM THE CARRIER STRIP Nach trennen vom Trägerstreifen D A A 9.8 C 08.03.06 CANTILEVER SPRING INSIDE AND OUTSIDE 0.8µm Au überfeder inner und außen 0.8µm Au 4 APVD 2.4-0.1 CONTACT AREA AND TOUCHING AREA TO CANTILEVER SPRING GOLD PLATED MIN. 0.8µm OVER MIN. 1.3µm Ni- LAYER, REST TIN PLATED MIN. 2µm Kontaktzone und Anlagefläche zur überfeder vergoldet min. 0.8µm über min. 1.3µm Ni - Zwischenschicht, rest verzinnt min. 1µm EXTRACTION TOOL NUMBER CORRECTED DWN B B 2 DATE C C 4.5 DESCRIPTION FORM A FORM B OBSOLETE SECTION B-B Schnitt B-B SECTION A-A Schnitt A-A E WIRE CRIMP Drahtcrimp G K CH H D B D Dr B - - - - - 929954-4 7 929954-3 929954-2 D 7 CuFe2 CuSn4 D - 7 D CuFe2 929952-7 7 D CuSn4 929952-4 D 929952-3 D 929952-2 D 929952-1 D 7 C 929950-3 C 929950-2 C 929950-1 C - - 928939-4 7 928939-3 928939-2 928939-1 G G 7 TE ORDER-NO. STRIP FROM Bandware PRE-TINNED min. 1µm G G REV CuFe2 CuSn4 CuFe2 CuSn4 CuFe2 CuSn4 MATERIAL Workstoff 1.0-1.5 FLR max. 2.3 E = 2.8 G = 3.0 D Dr = 1.3 1 H = 3.7 K = 3.9 D = 2.1 Double Crimp Doppelanschlag 878469-2 0.35+0.75 0.35+1.0 0.50+0.50 0.50+0.75 0.50+1.0 FORM B PRE-TINNED min. 1µm 539635-1 with die set 539739-2 3.5 4.5 5.9 SECTION C-C Schnitt C-C --- - 929952-8 929950-4 1 D 929954-1 - A D 1.0mm²=1.47 1.25mm²=1.56 1.5mm²=1.65 2 3 2 3 1 0.5-1.0 FLR max. 2.0 E = 2.6 G = 2.8 D Dr = 1.2 PRE-TINNED min. 1µm 0.8-0.1 0.5mm²=1.18 0.75mm²=1.27 1.0mm²=1.36 H = 3.2 K = 3.4 D = 1.8 Double Crimp Doppelanschlag FORM A 878468-2 539635-1 with die set 539739-2 3 3.9 878467-2 539635-1 with die set 539739-2 2.5 3.75 6 1 - 0.35+0.35 0.35+0.50 0.50+0.50 1 PRE-TINNED min. 1µm 1 PRE-TINNED min. 1µm 0.2-0.5 FLR max. 1.6 E = 2.1 G = 2.1 D Dr = 0.8 1 H = 2.8 K = 2.8 D = 1.4 0.2mm²=0.98 0.25mm²=1.00 0.35mm²=1.05 0.5mm²=1.12 FORM A 5.9 PRE-TINNED min. 1µm 1 PRE-TINNED min. 1µm 0.35-0.75 FLR max 1.9 E = 2.3 G = 2.4 D Dr = 1.0 1 0.35mm²=1.09 0.50mm²=1.16 0.75mm²=1.27 H = 3.2 K = 3.1 D = 1.6 Double Crimp Doppelanschlag FORM A SURFACE Oberflaeche WIRE RANGE Drahtgroben Bereich (mm^2) (mm) WIRE CRIMP Drahtcrimp STRIP FORM INSUL.-CRIMP Isol.- Crimp Bandware 2.9 3.75 5.9 WIRE CRIMP HEIGHT CH APPLICATION TOOL Drahtcrimp - Hohe CH Anschlag-WKZ CRIMP DIMENSION (mm) Crimp abmessungen (mm) HAND TOOL Handzange EXTRACTION TOOL Ausdrockwerkzeug No. 5-1579007-5 THIS DRAWING IS NOT SUBJECT TO CONSTANT CHANGING SERVICE AND DOES NOT LAY CLAIM TO BE COMPLETE. FOR DEFINITE SPECIFICATION SEE RESPECTIVE TE CUSTOMER DRAWINGS. FURTHER VERSIONS ON INQUIRY. Diese Zeichnung unterliegt nicht dem standigen anderungsdienst und erhebt keinen anspruch auf vollstandigkeit. verbindliche angaben sinder jeweiligen TE-kundenzeichnung zu entnehmen. weiter ausfuhrungen auf anfrage 0.35+0.75 PRE-TINNED min. 1µm INSULATION n Isolations 878376-2 539635-1 with die set 539739-2 29.12.04 T. konecny CHK 29.12.04 M. Brunner APVD - NAME DWN THIS DRAWING IS A CONTROLLED DOCUMENT. A B C DIMENSIONS: mm MATERIAL SEE TABLE - 4806 (3/13) A TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - PRODUCT SPEC 108-18024 SEE TABLE - 114-18163 WEIGHT Customer Drawing Product Group Drawing for: Micro Timer 1 Contact Produkt-Gruppen-Zeichnung for : Micro Timer 1 Kon - APPLICATION SPEC 2 $ TE Connectivity SIZE A0 CAGE CODE DRAWING NO - RESTRICTED TO 1703333 SCALE 5:1 SHEET - 1 OF 1 REV A4