936919-000

SPECIFICATION CONTROL DRAWING 55PC0811 WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, GENERAL PURPOSE, NORMAL AIRFRAME TITLE Date Revision 07-09-04 F This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC. CONDUCTOR - TIN-COATED COPPER INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS PART NUMBER 1/ WIRE SIZE (AWG) 55PC0811-26-* 55PC0811-24-* 55PC0811-22-* 55PC0811-20-* 55PC0811-18-* 55PC0811-16-* 55PC0811-14-* 55PC0811-12-* 55PC0811-10-* 55PC0811- 8-* 55PC0811- 6-* 55PC0811- 4-* 55PC0811- 2-* 55PC0811- 0-* 55PC0811- 00-* 26 24 22 20 18 16 14 12 10 8 6 4 2 0 00 CONDUCTOR STRANDING (number x AWG) 19 19 19 19 19 19 19 37 37 133 133 133 665 1045 1330 x x x x x x x x x x x x x x x 38 36 34 32 30 29 27 28 26 29 27 25 30 30 30 CONDUCTOR DIAMETER ( in.) LOWER SPEC LIMIT TARGET VALUE UPPER SPEC LIMIT .0175 .0225 .0285 .0365 .0452 .0514 .0644 .0825 .1050 .158 .198 .250 .320 .395 .440 .0183 .0233 .0293 .0375 .0464 .0527 .0659 .0845 .1070 .163 .205 .260 .330 .415 .462 .0191 .0241 .0301 .0385 .0476 .0538 .0674 .0865 .1090 .169 .212 .268 .340 .425 .475 FINISHED WIRE DIAMETER MAXIMUM ( in.) RESISTANCE AT 20°C LOWER SPEC TARGET UPPER SPEC (ohms/1000 ft.) LIMIT VALUE LIMIT 41.3 26.2 16.2 9.88 6.23 4.81 3.06 2.02 1.26 .701 .445 .280 .183 .116 .091 .0366 .0416 .0476 .0561 .0659 .0737 .0896 .1076 .1290 .188 .233 .300 .370 .449 .505 .0385 .0435 .0495 .0580 .0680 .0760 .0920 .1105 .1330 .196 .242 .311 .383 .466 .525 .0404 .0454 .0514 .0599 .0701 .0783 .0944 .1134 .1370 .203 .251 .322 .397 .483 .545 WEIGHT ( lbs/1000 ft. ) TARGET VALUE UPPER SPEC LIMIT 1.55 2.18 3.12 4.64 6.94 8.80 13.50 20.45 31.73 56.8 89.7 146. 227. 343. 450. 1.70 2.34 3.30 4.85 7.27 9.17 13.99 21.08 32.78 59.9 94.7 154. 240. 366. 481. WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 in. INSULATION ELONGATION AND TENSILE STRENGTH: VOLTAGE WITHSTAND TEST (Post Environmental): Total Insulation, 2500 volts (rms) Elongation, 50% (minimum) Tensile Strength, 5000 lbf/in² (minimum) PART NUMBER: INSULATION FLAWS: The "*" in the part numbers above shall be replaced by Spark Test, 3.0 kV (rms) color code designators. Impulse Dielectric Test, 8.0 kV (peak) INSULATION THICKNESS: .010 in. (nominal) total insulation 1/ Example: AWG 22, white: 55PC0811-22-9 AWG 22, white with black stripe: 55PC0811-22-90 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Page 1 of 1 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. R Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297