9530J1424-9X-CS1566

9530J1424 SPECIFICATION CONTROL DRAWING CHEMINAX Date: 95 OHM, AWG 30, 7 STRANDS OF AWG 38, COAXIAL CABLE 6-2-14 Revision: C THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS OTHERWISE DESIGNATED. .0120 .068 (maximum) .084 (maximum) CHARACTERISTIC IMPEDANCE 95 ± 10 ohms, Method B CAPACITANCE 13.1 pF/ft. (nominal) 15.0 pF/ft. (maximum) CONDUCTOR AWG 30, 7 Strands of AWG 38, Silver-Coated HighStrength Copper Alloy VELOCITY OF PROPAGATION 83% (nominal) DIELECTRIC Foamed FEP Color - White ELECTRICAL SHIELD AWG 40, Tin-Coated Copper ADDITIONAL REQUIREMENTS CONDUCTOR RESISTANCE 116. ohms/1000 ft. (nominal) INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST IMPULSE TEST 1.0 kV (rms) 6.0 kV (peak) VOLTAGE WITHSTAND (DIELECTRIC) 1500 volts (rms) ENVIRONMENTAL .101 (nominal) .106 (maximum) FLAMMABILITY Method B HEAT SHOCK 225°C LOW TEMPERATURE-COLD BEND -55°C/2.75 inch mandrel VOLTAGE WITHSTAND (Post Environmental) 1000 volts (rms), 1 minute JACKET Modified FEP PHYSICAL Designate outer jacket color with a dash number in accordance with MIL-STD-681. Unless otherwise specified, outer jacket color will be translucent white designated by a "-9X" appended to the part number, (e.g. 9530J1424-9X). Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. INSULATION (DIELECTRIC) ELONGATION TENSILE STRENGTH 50% (minimum) 600 lbf/in2 (minimum) JACKET ELONGATION TENSILE STRENGTH 200% (minimum) 2000 lbf/in2 (minimum) JACKET THICKNESS 010 inch (nominal) SHIELD COVERAGE 90% (minimum) WEIGHT 7.6 lbs/1000 ft. (nominal) ENGINEERING REFERENCE TEMPERATURE RATING 150°C (maximum) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Cheminax, Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2014 Tyco Electronics Corporation. All rights reserved.