998844-000

SPECIFICATION CONTROL DRAWING Product Revisions Component Dimensions Product Name SO63-1-01-100 A Ident. Code SO631R SO63-2-01-100 A SO632R SO63-3-01-100 A SO633R SO63-4-01-100 A SO634R SO63-5-01-100 A SO635R L±1.75 (L±0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) øB min 1.9 (0.075) 2.65 (0.105) 4.3 (0.170) 5.95 (0.235) 7.0 (0.275) øC min 2.65 (0.105) 3.68 (0.145) 5.08 (0.200) 6.45 (0.255) 7.6 (0.300) H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) Shall Accommodate Cable with Dimensions øE øF øD max min max 2.65 0.90 1.9 (0.105) (0.035) (0.075) 3.68 1.40 2.65 (0.145) (0.055) (0.105) 5.08 2.15 4.3 (0.200) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.6 4.30 7.0 (0.300) (0.170) (0.275) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. THERMAL INDICATOR: Fusible ring with melt point 221°C. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Nickel plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55°C to +150°C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: *A trademark of Raychem Corporation. THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for ROUGHNESS IN 0.0 N/A their application. MICRON 0 N/A TITLE: SOLDERSLEEVE* DEVICE SHIELD TERMINATION WITH BRAID DOCUMENT NO.: SO63-X-01-100 DCR NUMBER: DRAWN BY: DATE: REV.: DOC ISSUE: M. FORONDA 02/25/99 SEE TABLE 3 If this document is printed it becomes uncontrolled. Check for the latest revision. REPLACES: D990119 SCALE: NONE D982101 SIZE: A SHEET: 1 of 1