A00123-001

CABLE BREAKOUT BOOT, FOUR ENTRY Table of Dimensions, inch (mm): PART NUMBER (See Note*) F3-9FR F-23FR F42-60FR F75-100FR F133-200FR F150-400FR Body ID Min. Exp. Max. Rec’d (A) (B) 0.90 (23) 0.43 (11) 1.25 (32) 0.80 (20) 1.75 (44) 0.98 (25) 2.35 (60) 1.00 (25) 2.65 (67) 1.40 (36) 5.25 (133) 3.00 (76) Leg ID Min. Exp. (C) 0.28 (7) 0.50 (13) 0.79 (20) 1.00 (25) 1.20 (30) 1.35 (34) Length Recovered Min. Max. Rec’d (D) 0.11 (3) 0.19 (5) 0.26 (7) 0.35 (9) 0.53 (13) 0.55 (14) (E), Body 2.0 (51) 2.3 (58) 2.3 (58) 2.8 (71) 3.5 (89) 5.0 (127) Rec’d. Wall Ref. (W) 0.05 (1.2) 0.09 (2.3) 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.13 (3.3) (F), Leg 0.8 (20) 1.0 (25) 1.2 (30) 1.7 (43) 1.5 (38) 3.0 (76) Add “NA” to the end of Part Number if no adhesive is required. Note*: Material: Heat shrinkable boot material in accordance with –3 polyolefin Factory applied sealant: Factory applied hot melt adhesive is standard. Product Brand: Raychem Products, North America Tyco Electronics Corporation 300Constitution Drive Menlo Park, CA 94025 USA Title: CABLE BREAKOUT BOOT, FOUR ENTRY Specification Control Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. METRIC DIMENSIONS ARE SHOWN IN BRACKETS Size A Cage Code FXXX-XXXFR Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. Org. Date: Original file: A.Ng 03/17/03 If this document is printed it becomes uncontrolled. Check for the latest revision. Drawn By: Document No. 06090 Rev.: Rev. Date: B 25-Mar-03 File : R030156.doc Scale: None Sheet: 1 of 1