A54015-000

AP2000 Special Sizes Modified Polyolefin, Adhesive Lined Heat - Shrinkable Tubing Table 1: Dimensions Inside Diameter Size As Supplied Minimum (D) in mm .788 20.0 .906 23.0 1.024 26.0 1.182 30.0 .748 19.0 1.024 26.0 No. 103 No. 104 No. 105 No. 106 No. 107 No. 108 Recovered Maximum (d) in mm .354 9.0 .591 15.0 .709 18.0 .591 15.0 .291 7.4 .354 9.0 Recovered Wall Thickness, Nominal (W) in mm .039 1.0 .039 1.0 .039 1.0 .039 1.0 .056 1.4 .039 1.0 The tubing shall meet the requirements of RW-1001. Material The outer jacket shall be fabricated from modified polyolefin and shall be crosslinked. The inner jacket shall be a meltable adhesive. The dual wall tubing shall be homogeneous, free from flaws, defects, bubbles, pinholes, seams, cracks or inclusions and each wall shall be uniform. Specification Control Drawing Title: AP2000 Special Sizes Modified Polyolefin, Adhesive Lined Heat - Shrinkable Tubing Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application Cage Code: Scale: Size: 06090 None A Document No : AP2000 Tubing (Special Sizes) Rev. Date: Rev.: Sheet: 3-Mar-03 D 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.