AAG5411-00

TINEL RING SWEPT ELBOW BACKSHELLS (TXR) PROVIDES A SMOOTH 90° CABLE TERMINATION OPTION FOR SCREENED CABLES TE Connectivity’s (TE) Tinel Ring (TXR) swept elbow backshells are designed with a smooth internal bore and a continuous bend radius. TE is complementing the recently introduced banding (BT) backshell with a tinel-lock version (TXR) to suit a wide range of circular connectors. These backshells offer up to 20% weight savings over traditional backshells. Swept elbow backshells can be utilized in many aerospace and defense applications where highly reliable termination solutions are required. APPLICATIONS/MARKETS • Aerospace • Defense WEIGHT SAVINGS • Up to 20% over the traditional right angle design STANDARDS AND SPECIFICATIONS MULTIPLE CONFIGURATIONS •T  XR40 mates to MIL-DTL-38999 Series III & IV and when mated shall provide water-tight seal meeting the requirements of MIL-C-85049 • Multiple shell sizes and plating finishes available • TXR54 mates to MIL-DTL-26482 Series II and MIL-DTL-83723 Series I and II EASY INSTALLATION • Simple and fast termination solutions PART NUMBERING TXR 40 AB 9W 16 – 08 AI H • The spin coupling nut allows for improved reliability SERIES HIGH-RELIABILITY SOLUTIONS CONNECTOR INTERFACE 40 54 • With a heat shrink boot, backshells can provide strain relief and cable support to help prevent bending or overflexing MATERIAL & FINISH (TABLE 1) ANGLE •O  verall 360° screening against EMI/RFI interference NUMBER (TABLE 2) TE REPAIR RINGS ENTRY SIZE (TABLE 3) • TE has a wide variety of Side Entry Tinel (SETR) repair rings available for rework in the field RING OPTION AI To Suit Single Braid BI To Suit Double Braid MODIFICATION CODE H Helical Conduit Thread For no modification, leave blank. *Contact TE for all modification options AEROSPACE, DEFENSE & MARINE / TINEL RING SWEPT ELBOW BACKSHELLS (TXR) Tinel Ring Swept Elbow Backshells (TXR) TABLE 1 Code Material & Plating AB AC AZ Aluminum, cadmium olive drab over electroless nickel Aluminum, electroless nickel Aluminum, zinc nickel black passivate over electroless nickel *Contact TE for all material and plating options Connector Interface 40 Connector Interface 54 TABLE 2 TABLE 2 Order Number Shell Size A Thread ØB Max K Max F Max R Ref. ØT Min Entry Sizes Order Number Shell Size A Thread ØB Max K Max F Max R Ref. ØT Min Entry Sizes 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 M12 x 1.0 M15 x 1.0 M82 x 1.0 M22 x 1.0 M25 x 1.0 M28 x 1.0 M31 x 1.0 M34 x 1.0 M37 x 1.0 18.0 21.0 24.5 29.0 32.5 35.5 37.0 40.0 43.5 19.2 22.4 25.6 28.7 31.9 35.1 38.3 41.4 44.6 31.9 35.1 38.3 41.4 44.6 47.8 51.0 54.1 57.3 9.0 12.2 15.4 18.5 21.7 24.9 28.1 31.2 34.4 6.7 10.2 13.5 16.2 19.4 21.8 25.1 28.2 31.4 04 04, 05 06, 07 07, 08 08, 10 10, 12 12, 14 14, 16 16, 18 08 10 12 14 16 18 20 22 24 08 10 12 14 16 18 20 22 24 1/2 - 20UNF 5/8 - 24UNEF 3/4 - 20UNEF 7/8 - 20UNEF 1 - 20UNEF 1 1/16 - 18UNEF 1 3/16 - 18UNEF 1 5/16 - 18UNEF 1 7/16 - 18UNEF 15.6 18.6 21.7 24.9 28.2 30.9 34.1 37.3 40.4 19.2 22.4 25.6 28.7 31.9 35.1 38.3 41.4 44.6 31.9 35.1 38.3 41.4 44.6 47.8 51.0 54.1 57.3 9.0 12.2 15.4 18.5 21.7 24.9 28.1 31.2 34.4 6.6 9.3 12.8 14.7 17.8 19.8 23.0 26.2 29.1 04 04, 05 06, 07 07, 08 08, 10 10, 12 12, 14 14, 16 16, 18 TABLE 3 TABLE 3 Entry Size ØG Min 04 05 06 07 08 10 12 14 16 18 6.35 7.92 9.53 11.10 12.70 15.88 19.05 22.23 25.40 28.58 ØJ ØH ± 0.3 Entry Size ØG Min ØJ ØH ± 0.3 9.49 +/-0.04 11.06 +/-0.04 12.66 +/-0.04 14.21 +/-0.07 15.81 +/-0.07 18.96 +/-0.08 22.14 +/-0.08 25.30 +/-0.08 28.48 +/-0.08 31.65 +/-0.08 14.0 15.5 17.1 18.7 20.3 23.5 26.7 29.8 33.0 36.2 04 05 06 07 08 10 12 14 16 18 6.35 7.92 9.53 11.10 12.70 15.88 19.05 22.23 25.40 28.58 9.49 +/-0.04 11.06 +/-0.04 12.66 +/-0.04 14.21 +/-0.07 15.81 +/-0.07 18.96 +/-0.08 22.14 +/-0.08 25.30 +/-0.08 28.48 +/-0.08 31.65 +/-0.08 14.0 15.5 17.1 18.7 20.3 23.5 26.7 29.8 33.0 36.2 K XXXX T B R F F XXXX R A THREAD T K A THREAD All dimensions in mm G J H G J H te.com/txr-swept-elbow-backshells © 2021 TE Connectivity. All Rights Reserved. 2390915-1 05/21 AMP, AGASTAT, CII, DEUTSCH, DRI, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO, Raychem, Rochester, SEACON, TE, TE Connectivity and the TE connectivity (logo) are trademarks owned or licensed by TE Connectivity. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. North America +1 800 522 6752 • Asia Pacific +86 0 400 820 6015 • France +33 1 34 20 86 86 • Germany +49 6251 133 1999 • United Kingdom +44 800 267 666 Visit te.com for additional country contacts.