B-003-01

SPECIFICATION CONTROL DRAWING Product Revision Product Name B-003-00 K B-003-01 J B-003-02 L L max 16.5 (0.650) 16.5 (0.650) 21.5 (0.845) Product Dimensions øA øB min min 2.6 3.1 (0.100) (0.120) 4.4 4.9 (0.175) (0.195) 6.9 7.4 (0.270) (0.290) K min 150 (5.900) 150 (5.900) 150 (5.900) Cable Dimensions øE øF øG min min max 1.6 1.5 3.1 (0.063) (0.060) (0.120) 2.2 2.1 4.9 (0.085) (0.080) (0.195) 3.4 3.2 7.4 (0.135) (0.125) (0.290) øD max 2.6 (0.100) 4.4 (0.175) 6.9 (0.270) J±0.5 (J±0.02) 7 (0.275) 7 (0.275) 7 (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE INSERT: Thermally stabilized thermoplastic. Color: blue. 4. MELTABLE INSERT: Thermally stabilized thermoplastic. Color: clear. 5. GROUND LEAD: RAYCHEM 55A0111-24 in accordance with MIL-W-22759/32 AWG 24 stranded tin plated copper. Color: blue. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105°C minimum, meeting the dimensional criteria listed, and having tin or silverplated shields. 2. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem installation procedure RPIP-709-00. 3.Temperature range: -55°C to +125°C. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: DATE: PROD. REV. SEE TABLE M. FORONDA 06/23/98 If this document is printed it becomes uncontrolled. Check with the web for latest revision. TITLE: SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD LOW TEMPERATURE DOCUMENT NO: B-003-0X DCR NUMBER: REPLACES: D980560 DOC ISSUE: 3 SCALE: None B0030X SIZE: A SHEET: 1 of 1