B-051-00-01

SPECIFICATION CONTROL DRAWING Product Revision Product Name B-051-00-01 B B-051-01-01 D B-051-02-01 D L max 27.0 (1.065) 27.5 (1.085) 33.2 (1.310) Product Dimensions øA øB min min 19.0 17.0 (0.750) (0.670) 25.0 23.0 (0.985) (0.905) 34.0 33.0 (1.340) (1.300) øD max 17.0 (0.670) 23.0 (0.905) 33.0 (1.300) Cable Dimensions øE min 10.0 (0.395) 12.7 (0.500) 19.1 (0.750) J min 27.0 (1.065) 27.5 (1.085) 33.2 (1.310) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. APPLICATION 1. These controlled soldering devices are designed to terminate the braid of a braided connector backshell to the braid of a tin plated or bare copper shield on a cable having an insulation rated for at least +85°C. 2. Temperature range: -55°C to +125°C. For application tooling, consult your local Raychem technical service. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE* DEVICES, SHIELD TERMINATION-LOW TEMPERATURE DOCUMENT NO. B-051-0X-01 DCR NUMBER: REPLACES: D980628 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 06/15/98 SEE TABLE 2 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None B0510101 SIZE: A SHEET: 1 of 1