B-053-70-01

SPECIFICATION CONTROL DRAWING Product Revision Product Name B-053-70-01 K øA min 10.0 (0.395) Product Dimensions øB min 11.6 (0.455) L max 31.2 (1.230) øD max 10.0 (0.395) Cable Dimensions ød min 4.4 (0.175) øE min 8.0 (0.315) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: (Qty: 2) SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: clear. 4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: red. APPLICATION 1. This controlled soldering device is designed for termination of a tin plated braid to the tin plated shield of a cable having an insulation rated for at least +125°C. 2. Temperature range: -55°C to +150°C. 3. For application tooling , contact your local Raychem technical service. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE * SHIELD TERMINATOR DOCUMENT NO. B-053-70-01 DCR NUMBER: REPLACES: D981269 DRAWN BY: DATE: PROD. REV.: DOC ISSUE: M. FORONDA 6-Nov-98 SEE TABLE 2 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D961370 SIZE: A SHEET: 1 of 1