B-150-07-F

SPECIFICATION CONTROL DRAWING Product Revision Product Name B-150-05-F B B-150-07-F B øA min Product Dimensions øB min L max øE min 4.3 (0.169) 6.8 (0.267) 4.8 (0.189) 7.3 (0.287) 18.5 (0.728) 21.0 (0.827) 2.0 (0.078) 3.3 (0.130) Cable Dimensions øG J±0.5 max (J±0.020) 4.3 (0.169) 6.8 (0.267) 6.5 (0.256) 8.0 (0.315) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX. SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. 4. GROUNDING BAR: Tin plated brass alloy. APPLICATION 1. These controlled soldering, grounding devices are designed for termination of a bare or tin plated copper shield on a cable having an insulation rated for at least +85°C. 2. Temperature range: -55°C to +125°C. 3. For installation procedure and application equipment, consult RPIP-688-02. For best results, prepare the cable as shown: THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for ROUGHNESS IN 0.0 N/A their application. MICRON 0 N/A TITLE: SOLDERSLEEVE WITH FLAG TERMINAL DOCUMENT NO : B-150-XX-F DCR NUMBER: REPLACES: D990885 PREPARED BY: DATE: REV. DOC ISSUE: M. FORONDA 10/20/99 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D990628 SIZE: A SHEET: 1 of 1