B-155-3803

SPECIFICATION CONTROL DRAWING Product Revisions Product Name B-155-3801 B-155-3802 B-155-3803 B-155-3805 B-155-3806 B-155-3807 B-155-3809 B-155-3810 B-155-3811 B-155-3813 A A A A A A A A A A Product Dimensions L øA max min 1.7 [0.065] 26.0 [1.025) 1.95 [0.075] 2.7 [0.105] 4.5 [0.180] 6.0 [0.235] 7.0 [0.275] 42.0 [1.655] 8.7 [0.340] 9.7 [0.382] 10.7 [0.420] 13.0 [0.510] B max 1.7 [[0.065] 1.95 [0.075] 2.7 [0.105] 4.5 [0.180] 6.0 [0.235] 7.0 [0.275] 8.7 [0.340] 9.7 [0.382] 10.7 [0.420] 13.0 [0.510] Cable Dimensions øC min 0.9 [0.035] 1.1 [0.045] 1.8 [0.070] 2.3 [0.090] 3.3 [0.130] 3.7 [0.145] 4.2 [0.165] 6.8 [0.268] 7.1 [0.280] 8.9 [0.350] Qty: Item 2 øD min 0.4 [0.015] 0.6 [0.025] 1.3 [0.050] 1.8 [0.070] 2.8 [0.110] 3.2 [0.125] 3.7 [0.145] 6.0 [0.236] 6.6 [0.260] 8.4 [0.330] 1 2 1 1 1 1 2 2 2 1 MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: Qty: see table (one solder washer shown). SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. 3. MELTABLE RING: Thermally stabilized thermoplastic. Color: clear. 4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable, having an insulation rated for at least +85°C minimum. 2. Temperature range: -55°C to +125°C. 3. When installed properly, it will meet the performance requirements of Tyco Electronics / Raychem Specification RT-1404. 4. For installation procedure and application equipment consult RPIP-824-00 or H54286. For best results, prepare the cable as shown: Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON DCR NUMBER: REPLACES: SOLDERSLEEVE ONE STEP SHIELD TERMINATOR, LEAD-FREE DOCUMENT NO.: B-155-38XX ANGLES: N/A mforonda D050171 --© 2005 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. PROD. REV.: SEE TABLE CAGE CODE : 06090 DOC. ISSUE: DATE: 1 30-Jun-05 SCALE: SIZE: --- A SHEET: 1 of 1