B-600-42

SPECIFICATION CONTROL DRAWING Product Rev. Product Name B-600-41 A B-600-42 A B-600-43 A L max 100.00 (3.900) 100.00 (3.900) 115.00 (4.500) Product Dimensions øA øB min 4.90 4.78 (0.193) (0.188) 7.00 6.35 (0.276) (0.250) 9.00 9.53 (0.354) (0.375) Cable Dimensions øF M min min 2.40 to 3.80 2.40 15.00 (0.094) (0.150) (0.094) (0.590) 3.40 to 5.00 3.50 15.00 (0.134) (0.197) (0.137) (0.590) 4.50 to 7.00 4.50 15.00 (0.177) (0.276) (0.177) (0.590) øE N max 83.00 (3.270) 83.00 (3.270) 83.00 (3.270) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, PTFE Teflon tubing. 2. SHIELD: Tin-plated copper braid, fluxed and tinned at both ends. 3. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn96 per ANSI J/STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 4. THERMAL BARRIER: FEP Teflon tubing. Qty: 2 APPLICATION 1. These parts are designed to provide an in-line splice between the shield of cables, rated for 135°C minimum, meeting the dimensional criteria listed, having tin or silver-plated copper shields. 2. Temperature range: -55°C to +175°C. 3. Install using Tyco Electronics/Raychem-approved convection heating tools or equivalent. 4. For best results, prepare the cable as shown. Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: mforonda SOLDERSHIELD SPLICE KIT, FLEXIBLE, SINGLE SHIELD Raychem Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON DCR NUMBER: REPLACES: B-600-4X ANGLES: N/A D030460 D030443 If this document is printed it becomes uncontrolled. Check for the latest revision. PROD. REV.: SEE TABLE CAGE CODE : 06090 DOC. ISSUE: 2 SCALE: --- DATE: 19-Sep-03 SIZE: A SHEET: 1 of 1