BSTS-40X4

RAYCHEM Tubing Products 1 BSTS/BSTS-FR Heat-shrinkable Tubing General Purpose, Heat-Shrinkable Tubing Product Facts Excellent thick-wall insulation and abrasion protection ■ No adhesive – can be removed easily ■ Expansion ratios as high as 3:1 ■ Availability in flameretardant material with FR callout (see “Ordering information and Part numbering system” on the next page) ■ BSTS has the following agency approvals: - ABS (American Bureau of Shipping) - Lloyd’s (Lloyd’s Register of Shipping) ■ RoHS compliant ■ Specifications/Approvals Applications Installation Operating Temperature Range BSTS heat-shrinkable tubing is made of a rugged polymer that resists moisture, fungus, and weathering. It also has excellent electrical properties. This tubing is useful in applications where insulation, abrasion resistance, and strain relief are important. When used with sealant tape (S-1305 for flame-retardant or S-1278 for non-flame-retardant), it can provide a watertight system in nonpressurized applications. Minimum shrink temperature: 90°C [194°F] -55°C to 110°C [-67°F to 230°F] Minimum full recovery temperature: 121°C [250°F] Series Military Industry Raychem BSTS BSTS-FR — AMS-DTL-23053/15*, Class 1 and Class 2** — ASTM D 685, nonburning RW-2017 RW-2017 *Formerly MIL-I-23053/15 and MIL-DTL-23053/15. **Except for coatings requirement. Refer to SST-FR when coating is required. Available in: Americas Europe Asia Pacific ■ ■ ■ 1-5 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666 RAYCHEM Tubing Products BSTS/BSTS-FR (Continued) Product Dimensions Inside Diameter Maximum Minimum Expanded Recovered After Heating as Supplied 7.62 [0.300] 2.54 [0.100] 10.16 [0.400] 3.81 [0.150] 19.05 [0.750] 5.59 [0.220] 27.94 [1.100] 9.52 [0.375] 33.02 [1.300] 9.52 [0.375] 38.10 [1.500] 12.70 [0.500] 43.18 [1.700] 12.70 [0.500] 50.80 [2.000] 19.05 [0.750] 65.58 [2.700] 22.86 [0.900] 76.20 [3.000] 31.75 [1.250] 88.90 [3.500] 31.75 [1.250] 101.60 [4.000] 44.45 [1.750] 114.30 [4.500] 44.45 [1.750] Size BSTS-03 BSTS-04 BSTS-07 BSTS-11 BSTS-13 BSTS-15 BSTS-17 BSTS-20 BSTS-27 BSTS-30 BSTS-35 BSTS-40 BSTS-45 Wall Thickness (Nominal) Expanded as Supplied Recovered After Heating*** 0.63 [0.025] 0.63 [0.025] 0.76 [0.030] 1.02 [0.040] 0.89 [0.035] 1.27 [0.050] 1.14 [0.045] 1.27 [0.050] 1.27 [0.050] 1.27 [0.050] 1.27 [0.050] 1.27 [0.050] 1.27 [0.050] 1.78 [0.070] 1.78 [0.070] 2.41 [0.095] 3.05 [0.120] 3.05 [0.120] 3.56 [0.140] 3.56 [0.140] 3.94 [0.160] 3.94 [0.160] 3.94 [0.160] 3.94 [0.160] 3.94 [0.160] 3.94 [0.160] ***Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Size selection Standard packaging Ordering description Part Numbering System Standard Black Nonstandard White, Yellow, Red and Clear (Clear is non-flame retardant) Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. 1.2-meter [4-foot] or 7.5-meter [25-foot] lengths. See below. BSTS - _ x _ _ / _ / _ “NM” - no mark Color Black / leave blank (standard) White / WHT Red / RED Clear / CL “FR” - flame-retardant Length in feet (4 and 25 feet standard) Size Family Example: BSTS-11X4/NM 1-6 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666