C07210-000

Flag Labels User Guide – How to create repeatable flag labels 411-121050 - 29 February 2016 Position Label Ensure label is at right angles to the cable and at equal distances from the centre. 2 TE Connectivity Confidential & Proprietary. Do not reproduce or distribute. Fold-up sides Applying equal pressure and fold up sides. 3 TE Connectivity Confidential & Proprietary. Do not reproduce or distribute. Affixing Flag Label • Lightly apply pressure to the flag faces so label ends meet. • Increase pressure on flag faces to ensure maximum bond. • Progressively apply pressure down the label towards the cable. 4 TE Connectivity Confidential & Proprietary. Do not reproduce or distribute. Flag Label When flag made either run fingernail along label crease line or lightly fold flag along crease line to ensure maximum contact. 5 TE Connectivity Confidential & Proprietary. Do not reproduce or distribute. Flag Label Fundamentals To achieve optimum conditions when applying a label in a flag configuration there are key points that must be adhered to: • Cable must be centrally aligned and at right angles to label. • Label top & bottom edges must be equidistance from cable. • Label length = (flag length * 2) + (diameter of cable * 3.14). See TE Connectivity document 411-121050 (Guide to Repeatable Flag Labelling.pdf) for detailed information pertaining to Flag Labelling. 6 TE Connectivity Confidential & Proprietary. Do not reproduce or distribute.