C52405N001

SPECIFICATION CONTROL DRAWING Product Rev. Product Name Ident. Code Product Dimensions øB øC L±1.75 min min (L±0.070) 16.50 1.90 2.65 (0.650) (0.075) (0.105) 16.50 2.65 3.68 (0.650) (0.105) (0.145) 16.50 4.30 5.08 (0.650) (0.170) (0.200) øD max 1.90 (0.075) 2.65 (0.105) 4.30 (0.170) Cable Dimensions øE øF max min 2.65 0.90 (0.105) (0.035) 3.68 1.40 (0.145) (0.055) 5.08 2.15 (0.200) (0.085) øG min 0.50 (0.020) 0.75 (0.030) 1.25 (0.050) SO63-1-W1-GA-9-100 N/C SO631R SO63-2-W1-GA-9-100 N/C SO632R SO63-3-W1-GA-9-100 N/C SO633R SO63-4-W1-GA-9-100 N/C SO634R 19.10 (0.750) 5.95 (0.235) 6.45 (0.255) 5.95 (0.235) 6.45 (0.255) 3.30 (0.130) 1.80 (0.070) SO63-5-W1-GA-9-100 N/C SO635R 19.10 (0.750) 7.00 (0.275) 7.60 (0.300) 7.00 (0.275) 7.60 (0.300) 4.30 (0.170) 2.50 (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Fusible ring, melt point: 221°C. 3. MELTABLE RING: Environment resistant thermoplastic. Color: blue. 4. GROUND LEAD: Stranded Silver-plated High Strength Copper in accordance with MIL-W-22759/81. APPLICATION 1. These parts will provide a shield termination assembly when installed in accordance to Raychem RCPS-100-70 on cables rated for at least 125°C, meeting the dimensional criteria listed, having tin or silver-plated shields. 2. Temperature rating: -55°C to +150°C. 3. Parts shall be marked with identification code per table. Part Number Guide: For best results, prepare the cable as shown: SO63-X-W1-GA-9-100 Lead color designation per MIL-STD-681 Lead AWG 22, 24 Lead type: M22759/81 Size 1 to 5 “G” is the minimum diameter on which the sleeve will seal. Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: DCR NUMBER: M. FORONDA 06090 D020446 D040307 © 2004 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. SOLDERSLEEVE SHIELD TERMINATOR, ENVIRONMENT RESISTANT WITH LEAD DOCUMENT NO.: SO63-X-W1-GA-9-100 DOC. ISSUE: DATE: 2 PROD. REV.: SEE TABLE 28-Dec-04 SCALE: None SIZE: A SHEET: 1 of 1