C61680-000

Document number: TTDS-028 Issue: 5 Date: March 2007 TECHNICAL DATA SHEET TP pipe labels MATERIAL DESCRIPTION: Tyco “TP” is a thermal transfer printable multi-layered construction label comprising a high performance acrylic pressure sensitive adhesive, an optically clear polyester with a colored printable coating and uses zero halogen materials. It is supplied as die cut wraparound labels or continuous rolls on a paper release liner. USE: Identification of aircraft pipes by computer-based printing onto wraparound selflaminating labels. Suitable for military and commercial aerospace applications. TP labels meet all the requirements of MIL-T-9066C with the exception of 5 minute dwell peel strength (note: MIL-T-9066C is obsolete and has not been replaced). PRINT METHOD/RIBBON: Thermal Transfer: T300 Series, Tyco 1330-3300-XX Ribbon Thermal Transfer: T408M-PRINTER, Tyco 1330-0617-XX Ribbon, Tyco 13303300-XX Ribbon SHELF LIFE: 2 years when stored at 95°F (35°C). COLORS: Several pre-printed patterns conforming to MIL-STD-595B, MIL-STD-101B and MIL-STD-1247. Clear overlaminate “tail”. APPROXIMATE TOTAL THICKNESS: Face stock: Adhesive: Liner: MINIMUM INSTALLATION TEMPERATURE: 10°C (50°F). SERVICE TEMPERATURE: -40°C (-40°F) to +163°C (+325°F). HEAT AGEING: No cracking or wrinkling and markings unaffected after 100 hours at 163°C (325°F). LOW TEMPERATURE RESISTANCE: No adhesion loss after 3 X 2 hour cycles to -196°C (-321°F). 0.036mm (0.0014 inches). 0.025mm to 0.028mm (0.001 to 0.0011 inches). 0.079mm (0.0031 inches). TENSILE STRENGTH: 6.6N/mm (38 lb/inch width) typical (ASTM D3759). ULTIMATE ELONGATION: 130% typical (ASTM D3759). MARK PERMANENCE: Print legible after 20 rubs (SAE AS81531 4.6.2) without overlaminate “tail” in place. CORROSION PROPERTIES: No surface corrosion or stress corrosion cracking of MIL-T-8504 stainless steel pipe after 144 hours at 163°C (325°F), 20cl water vapor Parr pressure vessel. WEATHERING RESISTANCE: No visible deterioration, markings legible and 0.77N/mm (70 oz/inch) peel strength retained after 96 hours (ASTM D3815 with water spray). ADHESION TO DRY ALUMINIUM: 0.29N/mm (26oz/inch) peel strength typical after 5 minute dwell at 23°C (73°F) (ASTM D3330 Procedure A). 0.42N/mm (40oz/inch) peel strength typical after 72 hour dwell at 23°C (73°F) (ASTM D3330 Procedure A). ADHESION TO PRINTED LAYER: 0.25N/mm (23oz/inch) immediate peel strength (ASTM D3330 Procedure A). ADHESIVE STABILITY: 0.29N/mm (26oz/inch) peel strength typical 20 hours (ASTM D3815 without water spray). HIGH PRESSURE HOSE RESISTANCE: No visual change or movement of label after 5 minute water jet application to label seam (water jet at 35°C (95°F) and 80 bar pressure, 19mm silver steel rod substrate). ADHESIVE FLUID RESISTANCE: All tests conducted on aluminium panel substrates, peel strength measured according to ASTM D3330 Procedure A. Peel strengths in N/mm (oz/inch). 0.40N/mm (36oz/inch) peel strength typical after 72 hour dwell at 23°C (73°F) (ASTM D3330 Procedure A). FLUID Distilled water (24 hours at 23°C (73°F)) MIL-T-83133 aircraft fuel (JP-8) (72 hours at 23°C (73°F)) MIL-L-7808 lubricating oil (24 hours at 93°C (200°F)) MIL-H-5606 hydraulic oil (OM15) (72 hours at 23°C (73°F)) MIL-H-83282C hydraulic fluid (OX19) (72 hours at 23°C (73°F)) MIL-L-23699C engine & gearbox oil (OX27) (72 hours at 23°C (73°F)) MIL-L-6081C corrosion inhibitor (O133) (72 hours at 23°C (73°F)) Skydrol™ 500 B4 hydraulic fluid (72 hours at 23°C (73°F)) Skydrol™ LD4 hydraulic fluid (72 hours at 23°C (73°F)) S737/AL11 IPA deicing fluid (72 hours at 23°C (73°F)) 60:40 isooctane:toluene aircraft fuel (72 hours at 23°C (73°F)) 70:30 isooctane:toluene aircraft fuel (72 hours at 23°C (73°F)) Tri-n-butyl phosphate (72 hours at 23°C (73°F)) PEEL STRENGTH -TYPICAL 0.45 (41) 0.41 (38) 0.51 (47) 0.49 (45) 0.55 (50) 0.59 (53) 0.55 (50) 0.45 (41) 0.53 (48) 0.38 (35) 0.16 (14) 0.29 (26) 0.29 (26) LABEL FLUID RESISTANCE: All tests conducted on aluminium rod substrates. FLUID Distilled water (24 hours at 23°C (73°F)) MIL-T-83133 aircraft fuel (JP-8) (24 hours at 23°C (73°F)) MIL-L-7808 lubricating oil (24 hours at 23°C (73°F)) MIL-H-5606 hydraulic oil (OM15) (24 hours at 23°C (73°F)) MIL-H-83282C hydraulic fluid (OX19) (24 hours at 23°C (73°F)) MIL-L-23699C engine & gearbox oil (OX27) (24 hours at 23°C (73°F)) MIL-L-6081C corrosion inhibitor (O133) (72 hours at 23°C (73°F)) FLUID Skydrol™ 500 B4 hydraulic fluid (72 hours at 23°C (73°F)) Skydrol™ LD4 hydraulic fluid (72 hours at 23°C (73°F)) S737/AL11 IPA deicing fluid (72 hours at 23°C (73°F)) 60:40 isooctane:toluene aircraft fuel (72 hours at 23°C (73°F)) 70:30 isooctane:toluene aircraft fuel (72 hours at 23°C (73°F)) AGGRESSIVE FLUID RESISTANCE: ASSESSMENT Print & color unaffected; 0mm edge attack typical Print & color unaffected; 0mm edge attack typical Print & color unaffected; 0mm edge attack typical Print & color unaffected; 0mm edge attack typical Print & color unaffected; 0mm edge attack typical Print & color unaffected; 0mm edge attack typical Print & color unaffected; 4.6mm edge attack typical ASSESSMENT Print & color unaffected; 3.5mm edge attack typical Print & color unaffected; 3.5mm edge attack typical Print & color unaffected; 5.4mm edge attack typical Print & color unaffected Print & color unaffected Labels tested according to BPS-T-151 Revision D on 19mm (0.75 inches) diameter titanium (EN3120 (J84.451) TI-P64003, Hytrel™ (MM0047) and neoprene (DTD5514/D) cylindrical substrates. FLUID Skydrol™ 500 B4 hydraulic fluid (168 hours at 23°C (73°F)) JP-4 aircraft fuel (168 hours at 23°C (73°F)) MIL-L-7808 lubricating oil (168 hours at 23°C (73°F)) ASSESSMENT Print & color unaffected; label firmly attached Print & color unaffected; label firmly attached Print & color unaffected; label firmly attached See Tyco specification RW 2068 for full TP performance & dimensional details. Product is compliant to EU RoHS Directive 2002/95/EC. This compliance information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For the latest compliance status, visit the Tyco Electronics RoHS Customer Support Center - http://www.tycoelectronics.com/customersupport/rohssupportcenter All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.