C65803-000

SPECIFICATION CONTROL DRAWING Title 55A7526 Date TWO CONDUCTOR CABLE, TIN-COATED COPPER CONDUCTOR, 07-15-04 UNSHIELDED, UNJACKETED This specification sheet forms a part of the latest issue of Raychem Specification 55A. Revision COMPONENT WIRES - 55A6768 PART NUMBER 1/ 55A7526-18-* CABLE CONSTRUCTION DETAILS OUTSIDE DIAMETER CONDUCTOR (inches) SIZE (AWG) NOMINAL MAXIMUM 18 .140 .146 MAXIMUM WEIGHT (lbs/1000 ft) 14.7 CABLE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level INSULATION FLAWS: Spark Test, 5.7 kV (rms) at 3kHz Impulse Dielectric Test, 8.0 kV (peak) The “*” in the part numbers above shall be replaced by color code designators with a slash separating component wire colors: 1/ Example: AWG 18, black and white component wires: 55A7526-18-0/9 NOTE: Nominal values are for information only Nominal values are not requirements. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER, AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. Page 1 of 1 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297