C74367-000

HT-SCE High Temperature H E AT S H R I N K I D E N T I F I C AT I O N S Y S T E M Technical Datasheet TTDS-020 Revision 5 - Dec’ 2022 HT-SCE, High temperature, low vacuum outgassing, Heat shrink sleeves for the identification of wire and cables. HT-SCE heat shrink identification sleeving is designed for use in high temperature applications or where extreme resistance to fuels, lubricants and cleaning solvents is required. HT-SCE is ideal for applications where low-vacuum outgassing is of high importance. These identification sleeves are made of highly flame retardant, heat-shrinkable fluoropolymer tubing. HT-SCE Heat Shrink Identification Marker Sleeving is available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-020 – HT-SCE TECHNICAL DATA SHEET HT-SCE High Temperature identification sleeve Features Design for Environment · High Temperature · Does not contain any declarable or prohibited substances from the UNIFE Railway Industry Substances List · Low Vacuum Outgassing · Extreme Fluid Resistance · Self-extinguishing, non-flame propagating · Resistant to key rail, industrial and military fluids (defined by RW-2512) · Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: · http://www.te.com/usa-en/utilities/productcompliance.html · Designed for rugged environments · Military grade performance · Pre-termination Cable Identification · Sleeve diameters from 2.4mm to 38.1mm · Shrink ratio 2:1 (2.4mm 3:1) Temperature Rating Shelf Life · –55°C (-67°F) to 225°C (437°F) · Refer to TE document 408-121006, Cable Identification Shelf Life Document Applications Specifications / Approvals TE Connectivity Standard RW-2512 Rail EN45545-2, Hazard Classifications 1, 2 and 3, In accordance with requirement set R24 NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems, Fire protection requirements, Interior Fire Propagation Resistance Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials used in Passenger Cars and Locomotive Cabs SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003 Classification ‘Flame Retardant’ Serial number 2015-167K Military and Aerospace ASTM E 595, Standard test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in Vacuum Environment Print Performance · MIL 202 Method 215, Resistance to Solvents · SAE AS 5942, Marking of Electrical Insulating Materials, Adherence Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2512. PAGE 2 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-020 – HT-SCE TECHNICAL DATA SHEET HT-SCE High Temperature identification sleeve Part Description HT-SCE -1K -1/4 -2.0 -S1 -9 9 Color S1 Scoring (Optional) 2.0 Sleeve Length (inches) 1/4 Expanded Inside Diameter (inches) 1K Pack Size HT-SCE Product Family Available Options Pre-scoring Packaging sizes Colors 49 (0.92) NOMINAL Perforated score to produce multiple marker sleeves from each HT-SCE sleeve 1 Pre-score 2 Pre-scores Code Code 250 piece packs available for all sizes 1K 1000 piece reels available for all sizes up to 25.4 (1) 2.5K 2500 piece reels available for sizes 4.8 (3/16) up to 25.4 (1) 5K 5000 piece reels available for sizes 2.4 (3/32) and 3.2 (1/8) Color Code Color Code Yellow 4 Blue 6 White 9 Pink 2L PERFORATIONS S1 S2 SLEEVE PRINT WIDTH PRE-SCORE (S1) CARRIER Black 0 FIXING TAPE Specify product name, pack size (leave blank for 250), sleeve size (in inches), sleeve length (always 2.0), pre-score (leave blank if not required) and color SIDE SCORE (SS) Ordering Example: HT-SCE-1K-1/4-2.0-S1-9 Dimensions in mm (inches) Ordering Information Ordering description Inside diameter As supplied After recovery (minimum) (Maximum) mm inches mm inches Recommended cable diameter use range mm inches HT-SCE - - 3/32 - 2.0 - - 2.36 0.093 0.79 0.031 0.80 to 1.90 0.031 to 0.075 HT-SCE - - 1/8 - 2.0 - - 3.18 0.125 1.58 0.062 1.57 to 2.54 0.062 to 0.100 HT-SCE - - 3/16 - 2.0 - - 4.75 0.187 2.38 0.094 2.40 to 3.84 0.094 to 0.151 HT-SCE - - 1/4 - 2.0 - - 6.35 0.250 3.18 0.125 3.20 to 5.12 0.126 to 0.236 HT-SCE - - 3/8 - 2.0 - - 9.53 0.375 4.76 0.188 4.75 to 7.60 0.177 to 0.299 HT-SCE - - 1/2 - 2.0 - - 12.7 0.500 6.35 0.250 6.35 to 10.16 0.250 to 0.400 HT-SCE - - 3/4 - 2.0 - - 19.0 0.750 9.53 0.375 9.53 to 15.52 0.335 to 0.600 HT-SCE - - 1 - 2.0 - - 25.4 1.000 12.7 0.500 12.7 to 20.32 0.500 to 0.800 HT-SCE - - 1 -1/2 - 2.0 - - 38.1 1.500 19.0 0.750 19.0 to 30.48 0.750 to 1.200 PAGE 3 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-020 – HT-SCE TECHNICAL DATA SHEET HT-SCE High Temperature identification sleeves Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: http://www.te.com/usa-en/products/identification-labeling/ printers-software-and-accessories/printing-software/ wintotal.html?tab=pgp-story Contact your local support representative for further information. Contact details can be found in TE Document 411-121057 Go to http://www.te.com and use the search tool to download documents www.te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2022 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 4 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TTDS-020 – HT-SCE TECHNICAL DATA SHEET