Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Table of Contents
Introduction ................................................................................................................................ 2
T200 Ident Printer (Thermal Transfer) ....................................................................................... 3
Cable Identification markers ................................................................................................... 3
T200 Ident Printer (Thermal Transfer) ....................................................................................... 4
Cable Identification Continuous Tube..................................................................................... 4
T200 Ident Printer (Thermal Transfer) ....................................................................................... 5
Labels..................................................................................................................................... 5
T208M Printer and T212M-Printer (Thermal Transfer)............................................................... 6
Cable Identification markers ................................................................................................... 6
Labels..................................................................................................................................... 6
T200- Label Printer (Thermal Transfer) ..................................................................................... 7
TE3124-Printer and TE3112-Printer (Thermal Transfer)............................................................ 8
Cable Identification markers ................................................................................................... 8
TE3124-Printer and TE3112-Printer (Thermal Transfer)............................................................ 9
Cable Identification Continuous Tube..................................................................................... 9
TE3124-Printer and TE3112-Printer (Thermal Transfer).......................................................... 10
Labels................................................................................................................................... 10
T312M-Printer (Thermal Transfer) ........................................................................................... 11
Cable Identification markers ................................................................................................. 11
T312M-Printer (Thermal Transfer) ........................................................................................... 12
Labels................................................................................................................................... 12
T6112DS-Printer (Thermal Transfer) ....................................................................................... 13
T612M-DS-Printer (Thermal Transfer) ..................................................................................... 14
TTD03E / TTD04E / TTD05E / TTD06E PRINTERS (Thermal Transfer) ................................. 15
Labels (only) ......................................................................................................................... 15
TTP5200 / TTP5300 PRINTERS (Thermal Transfer)............................................................... 17
T408M-PRINTER (Thermal Transfer) ...................................................................................... 19
T308S / T312S-PRINTER (Thermal Transfer) ......................................................................... 20
Labels (only) ......................................................................................................................... 20
T2000CT-PRINTER (Thermal Transfer) .................................................................................. 21
LQ870 (Dot Matrix) .................................................................................................................. 22
LQ590 (Dot Matrix) .................................................................................................................. 22
Lexmark 2390 (Dot Matrix) ...................................................................................................... 23
AM6310 / AM6310D (Dot Matrix) ............................................................................................. 23
OKI-380 (Dot Matrix) ................................................................................................................ 24
Epson B-310N (Inkjet).............................................................................................................. 25
Epson Stylus Photo R285 (Inkjet) ............................................................................................ 25
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
1 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Epson Stylus Colour 1520 (Inkjet)............................................................................................ 25
BTT-02 (card printer) ............................................................................................................... 25
Ribbon ordering details ............................................................................................................ 26
Cable Identification markers (25.4MM ID core) .................................................................... 26
Cable Identification markers (12.7MM ID core) .................................................................... 26
Labels (25.4MM ID core) ...................................................................................................... 27
Labels (12.7MM ID core) ...................................................................................................... 27
BTT-02 (card printer) ............................................................................................................... 28
Trademarks .............................................................................................................................. 28
Related Documents: ................................................................................................................ 28
Introduction
It is essential that the combination of Printers, Products and Ribbons or Inks are correct, to
ensure the best print quality and mark permanence.
Each combination of Printer, Product, Ribbon and Ink have been evaluated for Print quality and
tested for mark permanence. Any deviation from the information contained in this document
will invalidate any assurances of print quality and mark permanence.
This document supersedes all previous documents detailing Identification printer, ribbon and
product combinations.
When selecting a ribbon width, it is essential that the ribbon width covers the entire area of the
label, to avoid missed print and damage to the print head.
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
2 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T200 Ident Printer (Thermal Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
CM-NMX
CM-SCE-TP
D-SCE
D-SCE
HLXNEL
HS
HS
HS
HTCM-SCE-TP
HT-SCE
HT-SCE (Black)
HX-SCE
MultiMark
RPS
NBC-SCE
TMS-SCE (2X)
TMS-SCE (Black)
TMS-90-SCE
STANDARD RIBBON
1330-3300-10
1966-RIBBON
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
1966-RIBBON ( For Superior performance)
1966-RIBBON
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
1966-RIBBON ( For Superior performance)
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4HT
T300-RIBBON-WH-4HT
1966-RIBBON
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4RPSCE
T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG (Silver)
1966-RIBBON
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
3 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T200 Ident Printer (Thermal Transfer)
Cable Identification Continuous Tube
COMPATIBLE PRODUCTS
D-SCE-FLAT-SP Sizes 38.1 and above
D-SCE-FLAT-SP Sizes 25.0 and below
E4
E4
HXCT Sizes 25.4 and below
HXCT Sizes 25.4 and above
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
WM-SCE
STANDARD RIBBON
1966-RIBBON
LBF-2000P-RIBBON-1966-MED (For print width of
60mm or less)
TMS-RJS-RIBBON-4RPSCE (For Optimal
performance)
1966-RIBBON ( For Superior performance)
LBF-2000P-RIBBON-1966-MED
1966-RIBBON
2000P-RIBBON-4TT-NAR
2000P-RIBBON-4TT-MED
TMS-RJS-RIBBON-4RPSCE
LBF-2000P-RIBBON-1966-MED
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
4 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T200 Ident Printer (Thermal Transfer)
Labels
COMPATIBLE PRODUCTS
Decals (TTP)
Destructible Polyethylene (TN)
EET…P-8A
EET…P-9
EET…P-4
EET…V-9
SET…PSL
HPK
IKT…PV-4
IKT…PY-9
IMT…PV-4
IMT…PY-9
EET…PY-9
EET…V-8A
EET…G-4
EET…V-4-W
EET-SL…V-4-W
EET…K-9
PPT…DF-4
PPT…DF-9
KTT
Kapton® polyimide (T1K/T2K )
Nylon cloth (NC)
Paper (EP)
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
SB Plus
SP
Tedlar® polyvinyl fluoride (TTVF/PVF)
WV
WPM
STANDARD RIBBON
1330-0607-10
1330-0607-10
For labels with liner width of 60mm or smaller:
TTB-060SC/300
For labels with liner width of 76mm to 60mm:
TTB-076SC/300
For labels with liner width of 84mm to 76mm:
TTB-084SC/300
For labels with liner width of 110mm to 84mm:
TTB-110SC/300
1330-0607-10
For labels with liner width of 60mm or smaller:
TTB-060SC/450AQ529
For labels with liner width of 90mm to 60mm:
TTB-090SC/360-AQ529
For labels with liner width of 110mm to 90mm:
TTB-110SC/300AQ529
1330-0619-10
1330-0607-10
1330-0600-10
1330-0607-10
TMS-RJS-RIBBON-4RPSCE
1330-0607-10
1330-3300-10
1330-0607-10
1330-0607-10
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
5 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T208M Printer and T212M-Printer (Thermal Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
D-SCE
HLXNEL*
HPK
HT-SCE
HT-SCE (Black)
HX-SCE*
NBC-SCE
RPS
TMS-SCE (2X)
TMS-SCE (Black)
TMS-90-SCE*
STANDARD RIBBON
TMS-101-RIBBON-4DSCE
T200-RIBBON-1966
1330-0607-T200
TMS-101-RIBBON-4HT
T200-RIBBON-WH-4HT
T200-RIBBON-1966
TMS-RJS-RIBBON-4HT
TMS-101-RIBBON-4RPSCE
TMS-101-RIBBON-4RPSCE
T200-RIBBON-WH (white) or TMS-101-RIBBON-4AG (silver)
T200-RIBBON-1966
Labels
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
Destructible Polyethylene (TN)
EP Paper Labels
Kapton® polyimide (T1K/T2K/TSK/T2Y)
Nylon Cloth (NC)
Polyesters (WP/MP/HW/HM/MV/HMM)
Self Lams (SBP)
Self Lams (PVF)
Self Lams (SP)
Tedlar® polyvinyl fluoride (TTVF/PVF)
White Vinyl (WV)
1330-0607-T200
1330-0607-T200
1330-0600-T200
1330-0619-T200
1330-0607-T200
1330-0607-T200
TMS-101-RIBBON-4RPSCE
1330-3300-101TT
1330-0607-T200
1330-3300-101TT
1330-0607-T200
* HX-SCE, HLXNEL & TMS-90-SCE for T212M only
Note: T208M-Printer being superseded by T200-Label printer
Note: T212M-Printer is being superseded by the T200-Ident-Printer
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
6 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T200- Label Printer (Thermal Transfer)
COMPATIBLE PRODUCTS
Decals (TTP)
Destructible Polyethylene (TN)
EET (P-8A, P-9, P-4)
EET (PY-9)
EET (G-4)
EET (V-8A, V-4-W, SL…V-4-W)
EET (V-9)
EET (K-9)
HPK
Kapton (T1K/T2K)
KTT
Nylon Cloth (NC)
Paper (EP)
Polyesters (WP/MP/HW/HM/MV/HMM)
PPT
Self Lams (SBP)
Self Lams (PVF)
Self Lams (SP)
SOLAR LABELS
Tedlar (TTVF/PVF)
White Vinyl (WV)
STANDARD RIBBON
1330-0607-T200
1330-0607-T200
1330-TTB-T200
1330-TTB-T200
1330-TTB-T200
1330-TTB-T200
1330-TTB-T200
1330-TTB-T200
1330-0607-T200
1330-0619-T200
1330-TTB-T200
1330-0607-T200
1330-0600-T200
1330-0607-T200
1330-TTB-T200
TMS-101-RIBBON-4RPSCE
1330-3300-101TT
1330-0607-T200
1330-0607-T200
1330-3300-101TT
1330-0607-T200
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
7 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
TE3124-Printer and TE3112-Printer (Thermal Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
CM-NMX (TE3112 only)
CM-SCE-TP
D-SCE
D-SCE
HL
HLX
HLX
MultiMark
HTCM-SCE-TP
HT-SCE
HT-SCE (Black)
HS/HC
HS/HC
HS/HC
HX
HX-SCE
NBC-SCE
NCM-SCE-TP
NHT-SCE
RPS
TMS-SCE (2X)
TMS-SCE (Black)
TMS-90-SCE
UV-SCE
STANDARD RIBBON
1330-3300-10
1966-RIBBON
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
1966-RIBBON ( For Superior performance)
TMS-RJS-RIBBON-4RPSCE
1966-RIBBON
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4HT
T300-RIBBON-WH-4HT
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
1966-RIBBON ( For Superior performance)
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
1966-RIBBON
1966-RIBBON
TMS-RJS-RIBBON-4HT
1966-RIBBON
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4RPSCE
T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG (Silver)
1966-RIBBON
T300-UV-SCE-RIBBON
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
8 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
TE3124-Printer and TE3112-Printer (Thermal Transfer)
Cable Identification Continuous Tube
COMPATIBLE PRODUCTS (Continued)
D-SCE-SP
D-SCE-FLAT-SP Sizes 25.0 and below
D-SCE-FLAT-SP Sizes 38.1 and above
HXCT Sizes 25.4 and below
E4
E4
HXCT Sizes 25.4 and above
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
WM-SCE
STANDARD RIBBON (Continued)
TMS-RJS-RIBBON-4DSCE
LBF-2000P-RIBBON-1966-MED
1966-RIBBON
LBF-2000P-RIBBON-1966-MED
TMS-RJS-RIBBON-4RPSCE (For Optimal
performance)
1966-RIBBON ( For Superior performance)
1966-RIBBON
2000P-RIBBON-4TT-NAR
2000P-RIBBON-4TT-MED
TMS-RJS-RIBBON-4RPSCE
LBF-2000P-RIBBON-1966-MED
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
9 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
TE3124-Printer and TE3112-Printer (Thermal Transfer)
Labels
COMPATIBLE PRODUCTS
Decals (TTP)
Destructible Polyethylene (TN)
EET…P-8A
EET…P-9
EET…P-4
EET…V-9
SET…PSL
IKT…PV-4
IKT…PY-9
IMT…PV-4
IMT…PY-9
EET…G-4
EET…PY-9
EET…V-8A
EET…V-4-W
EET-SL…V-4-W
EET…K-9
PPT…DF-4, DF-9
KTT
HPK
Kapton® polyimide (T1K/T2K/TSK/T2Y)
KMT
Nylon Cloth (NC)
Paper (EP)
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
Self Lams (SBP)
Self Lams (PVF)
Self Lams (SP)
SOLAR LABELS
TP Tape
Tedlar® polyvinyl fluoride (TTVF/PVF)
White Vinyl (WV)
STANDARD RIBBON
1330-0607-10
1330-0607-10
For labels with liner width of 60mm or smaller:
TTB-060SC/300
For labels with liner width of 76mm to 60mm:
TTB-076SC/300
For labels with liner width of 84mm to 76mm:
TTB-084SC/300
For labels with liner width of 110mm to 84mm:
TTB-110SC/300
For labels with liner width of 60mm or smaller :
TTB-060SC/450AQ529
For labels with liner width of 90mm to 60mm:
TTB-090SC/360-AQ529
For labels with liner width of 110mm to 90mm:
TTB-114SC/360AQ529
1330-0607-10
1330-0619-10
TTB-110SC/300WH
1330-0607-10
1330-0600-10
1330-0607-10
TMS-RJS-RIBBON-4RPSCE
1330-3300-10
1330-0607-10
1330-0607-10
1330-0607-10
1330-3300-10
1330-0607-10
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
10 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T312M-Printer (Thermal Transfer)
Cable Identification markers
COMPATIBLE PRODUCTS
CM-SCE-TP
D-SCE
D-SCE
HL
HLX
HS/HC
HS/HC
HTCM-SCE-TP
HT-SCE
HT-SCE (Black)
HX
HX-SCE
NBC-SCE
NCM-SCE-TP
NHT-SCE
RPS
TMS-SCE (2X)
TMS-SCE (Black)
TMS-90-SCE
UV-SCE
STANDARD RIBBON
1966-RIBBON
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
1966-RIBBON ( For Superior performance)
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
1966-RIBBON
TMS-RJS-RIBBON-4RPSCE (For Optimal performance)
1966-RIBBON ( For Superior performance)
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4HT
T300-RIBBON-WH-4HT (white)
1966-RIBBON
1966-RIBBON
TMS-RJS-RIBBON-4HT
1966-RIBBON
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4RPSCE
T300-RIBBON-WH (white) or TMS-RJS-RIBBON-4AG (silver)
1966-RIBBON
T300-UV-SCE-RIBBON
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
11 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T312M-Printer (Thermal Transfer)
Labels
COMPATIBLE PRODUCTS
STANDARD RIBBON
Decals (TTP)
Destructible Polyethylene (TN)
HPK
Kapton® polyimide (T1K/T2K/TSK/T2Y)
Nylon Cloth (NC)
Paper (EP)
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
Self Lams (SBP)
Self Lams (PVF)
Self Lams (SP)
Tedlar® polyvinyl fluoride (TTVF/PVF)
TP Tape
White Vinyl (WV)
1330-0607-10
1330-0607-10
1330-0607-10
1330-0619-10
1330-0607-10
1330-0600-10
1330-0607-10
TMS-RJS-RIBBON-4RPSCE
1330-3300-10
1330-0607-10
1330-3300-10
1330-0607-10
1330-0607-10
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
12 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T6112DS-Printer (Thermal Transfer)
COMPATIBLE PRODUCTS
D-SCE
D-SCE
D-SCE-SP
D-SCE-SP
D-SCE-SP
D-SCE-FLAT-SP Sizes 38.1 and above
D-SCE-FLAT-SP Sizes 25.0 and below
E4
E4
HT-SCE
HXCT Sizes 25.4 and below
HXCT, sizes 38.1 and above
HX-SCE
NBC-SCE
NHT-SCE
RPS
TMS-SCE (2X)
TMS-90-SCE
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
STANDARD RIBBON
TMS-RJS-RIBBON-4DSCE(For Optimal
performance)
1966-RIBBON (For Superior performance)
TMS-RJS-RIBBON-4DSCE (For Optimal
performance)
1966-RIBBON (For Superior performance)
LBF-2000P-RIBBON-1966-MED (For print
width of 60mm or less).
1966-RIBBON
LBF-2000P-RIBBON-1966-MED
TMS-RJS-RIBBON-4RPSCE (For Optimal
performance)
1966-RIBBON ( For Superior performance)
TMS-RJS-RIBBON-4HT
LBF-2000P-RIBBON-1966-MED
1966-RIBBON
1966-RIBBON
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4HT
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4RPSCE
1966-RIBBON
2000P-RIBBON-4TT-NAR
2000P-RIBBON-4TT-MED
TMS-RJS-RIBBON-4RPSCE
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
13 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T612M-DS-Printer (Thermal Transfer)
COMPATIBLE PRODUCTS
D-SCE
D-SCE
HT-SCE
HX-SCE
NBC-SCE
RPS-SCE
TMS-SCE
TMS-SCE-2X
STANDARD RIBBON
TMS-RJS-4RPSCE-RIBBON(For Optimal
performance)
1966-RIBBON (For Superior performance)
TMS-RJS-RIBBON-4HT
1966-RIBBON
TMS-RJS-RIBBON-4HT
TMS-RJS-4RPSCE-RIBBON
TMS-RJS-4RPSCE-RIBBON
TMS-RJS-4RPSCE-RIBBON
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
14 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
TTD03E / TTD04E / TTD05E / TTD06E PRINTERS (Thermal Transfer)
Labels (only)
COMPATIBLE PRODUCTS
STANDARD RIBBON
IKT…PV-4
IKT…PY-9
For labels with liner width of 60mm to 40mm:
IMT…PV-4
IMT…PY-9
EET…PY-9
EET…G-4
TTB-060SC/450AQ529S
For labels with liner width of 90mm to 76mm:
TTB-090SC/36-AQ529
For labels with liner width of 110mm to 90mm:
EET…V-8A
TTB-110SC/300AQ529S
For labels with liner width of 114mm to 110mm:
EET…V-4-W
EET-SL…V-4-W
TTB-114SC/360AQ529
For labels with liner width of 166mm to 165mm:
EET…K-9
PPT…DF-4
TTB-166SC/360AQ529
When "Ink in" is required delete "S" (TTB040SC/450AQ529)
PPT…DF-9
For labels with liner width of 60mm or smaller:
TTB-060SC/300
For labels with liner width of 76mm to 60mm:
EET…P-8A
TTB-076SC/300
For labels with liner width of 84mm to 76mm:
EET…P-9
TTB-084SC/300
For labels with liner width of 110mm to 84mm:
EET…P-4
TTB-110SC/300
For labels with liner width of 128mm to 110mm:
TTB-128SC/300
For labels with liner width of 145mm to 128mm:
EET…V-9
SET…PSL
TTB-145SC/300
For labels with liner width of 170mm to 145mm:
TTB-170SC/300
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
15 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
COMPATIBLE PRODUCTS
(Continued)
STANDARD RIBBON
(Continued)
For labels with liner width of 76mm or smaller:
PPT…DF-4
TTB-076SC/300WH
For labels with liner width of 84mm to 76mm:
PPT…DF-9
TTB-084SC/300WH
For labels with liner width of 110mm to 84mm:
KMT
TTB-110SC/300WH
For labels with liner width of 145mm to 110mm:
EP
TTB-145SC/300WH
For labels with liner width of 170 to 145mm:
TTB-170SC/300WH
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
16 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
TTP5200 / TTP5300 PRINTERS (Thermal Transfer)
COMPATIBLE PRODUCTS
STANDARD RIBBON
IKT…PV-4
IKT…PY-9
For labels with liner width of 60mm to 40mm:
IMT…PV-4
IMT…PY-9
TTB-060SC/450AQ529S
For labels with liner width of 90mm to 76mm:
EET…PY-9
EET…V-8A
EET…G-4
TTB-090SC/360-AQ529
For labels with liner width of 110mm to 90mm:
TTB-110SC/300AQ529S
For labels with liner width of 114mm to 110mm:
EET…V-4-W
EET-SL…V-4-W
TTB-114SC/360-AQ529
For labels with liner width of 166mm to 165mm:
EET…K-9
PPT…DF-4
TTB-166SC/360AQ529S
When "Ink in" is required delete "S" (TTB-040SC/450AQ529)
PPT…DF-9
For labels with liner width of 60mm or smaller:
TTB-060SC/300
For labels with liner width of 76mm to 60mm:
EET…P-8A
TTB-076SC/300
For labels with liner width of 84mm to 76mm:
EET…P-9
TTB-084SC/300
For labels with liner width of 110mm to 84mm:
EET…P-4
TTB-110SC/300
For labels with liner width of 128mm to 110mm:
TTB-128SC/300
For labels with liner width of 145mm to 128mm:
EET…V-9
TTB-145SC/300
For labels with liner width of 170mm to 145mm:
TTB-170SC/300
SET…PSL
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
17 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
COMPATIBLE PRODUCTS
(Continued)
STANDARD RIBBON
(Continued)
For labels with liner width of 76mm or smaller:
PPT…DF-4
TTB-076SC/300WH
For labels with liner width of 84mm to 76mm:
PPT…DF-9
TTB-084SC/300WH
For labels with liner width of 110mm to 84mm:
KMT
TTB-110SC/300WH
For labels with liner width of 145mm to 110mm:
EP
TTB-145SC/300WH
For labels with liner width of 170mm to 145mm:
TTB-170SC/300WH
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
18 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T408M-PRINTER (Thermal Transfer)
COMPATIBLE PRODUCTS
Decals (TTP)
Destructible Polyethylene (TN)
STANDARD RIBBON
1330-0607-10
D-SCE
1330-0607-10
TMS-RJS-RIBBON-4DSCE (For Optimal performance)
D-SCE
1966-RIBBON ( For Superior performance)
HL
TMS-RJS-RIBBON-4RPSCE
HLX
1910-RIBBON-4T300
HPK
1330-0607-10
HT-SCE
HT-SCE (Black)
Kapton® polyimide (T1K/T2K/TSK/T2Y)
KTT
NBC-SCE
Nylon Cloth (NC)
Paper (EP)
Polyesters
(WP/MP/CP/HW/HM/MV/HMM)
RPS
Self-Lams (SBP)
Self-Lams (PVF)
Self-Lams (SP)
Tedlar® polyvinyl fluoride (TTVF/PVF)
TMS-SCE (2X)
TMS-RJS-RIBBON-4HT
T300-RIBBON-WH-4HT
1330-0619-10
TTB-114SC/360
TMS-RJS-RIBBON-4HT
1330-0607-10
1330-0600-10
TMS-SCE (Black)
TMS-90-SCE
TP Tape
1330-0607-10
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4RPSCE
1330-3300-10
1330-0607-10
1330-3300-10
TMS-RJS-RIBBON-4RPSCE
T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG
(Silver)
TMS-RJS-RIBBON-4RPSCE
1330-0607-10
White Vinyl (WV)
1330-0607-10
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
19 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T308S / T312S-PRINTER (Thermal Transfer)
Labels (only)
COMPATIBLE PRODUCTS
Decals (TTP)
Destructible Polyethylene (TN)
HPK
Kapton® polyimide (T1K/T2K/TSK/T2Y)
KTT
Nylon Cloth (NC)
Paper (EP)
Self-Lams (SBP)
Self-Lams (PVF)
Self-Lams (SP)
Polyesters (WP/MP/CP/HW/HM/MV/HMM)
Tedlar® polyvinyl fluoride (TTVF/PVF)
TP Tape
White Vinyl (WV)
STANDARD RIBBON
1330-0607-10
1330-0607-10
1330-0607-10
1330-0619-10
TTB-114SC/360-AQ529
1330-0607-10
1330-0600-10
TMS-RJS-RIBBON-4RPSCE
1330-3300-10
1330-0607-10
1330-0607-10
1330-3300-10
1330-0607-10
1330-0607-10
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
20 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
T2000CT-PRINTER (Thermal Transfer)
COMPATIBLE PRODUCTS
D-SCE-FLAT-SP Sizes 38.1 and above
D-SCE-FLAT-SP Sizes 25.0 and below
TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7
TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4
TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above
HXCT Sizes 25.4 and below
HXCT Sizes 25.4 and above
STANDARD RIBBON
1966-RIBBON
LBF-2000P-RIBBON-1966-MED
2000P-RIBBON-4TT-NAR
2000P-RIBBON-4TT-MED
TMS-RJS-RIBBON-4RPSCE
LBF-2000P-RIBBON-1966-MED
1966-RIBBON
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
21 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
LQ870 (Dot Matrix)
COMPATIBLE MATERIALS
RPS
D-SCE
CM-SCE
NCM-SCE
Nomex (NMX)
Raymark (RMK6)
Tedlar (DMVF)
Self Lams (TW/PV)
Kapton (K)
Vinyl Cloth (C)
Polyesters (E/M)
STANDARD RIBBON
TMS-SYSTEM-SIX-RIBBON-A
TMS-SYSTEM-SIX-RIBBON-A
TMS-SYSTEM-SIX-RIBBON-A
TMS-SYSTEM-SIX-RIBBON-A
1330-0037-00
TMS-SYSTEM-SIX-RIBBON-A
1330-0037-00
1330-0037-00
1330-0037-00
1300-0037-00
1330-0037-00
LQ590 (Dot Matrix)
COMPATIBLE MATERIALS
RPS
D-SCE
CM-SCE
NCM-SCE
Raymark (RMK6)
STANDARD RIBBON
TMS-LQ590-RIBBON
TMS-LQ590-RIBBON
TMS-LQ590-RIBBON
TMS-LQ590-RIBBON
TMS-LQ590-RIBBON
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
22 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Lexmark 2390 (Dot Matrix)
COMPATIBLE MATERIALS
RPS
D-SCE
CM-SCE
NCM-SCE
Raymark (RMK6)
STANDARD RIBBON
TMS-SYSTEM-SIX-RIBBON-B
TMS-SYSTEM-SIX-RIBBON-B
TMS-SYSTEM-SIX-RIBBON-B
TMS-SYSTEM-SIX-RIBBON-B
TMS-SYSTEM-SIX-RIBBON-B
AM6310 / AM6310D (Dot Matrix)
COMPATIBLE MATERIALS
STANDARD RIBBON
RPS
D-SCE
CM-SCE
HPC
Raymark (RMK6)
HL
HS/HC
MultiMark (HM)
Nomex (NMX)
Tedlar (DMVF)
Self Lams (TW/PV)
HPC
1892BK04-RIBBON
1892BK01
Kapton (K)
Vinyl Cloth (CW)
Polyesters (E/M)
HX
HX-SCE
HLX
1892BK03
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
23 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
OKI-380 (Dot Matrix)
COMPATIBLE MATERIALS
HL
HS
HX
MultiMark (HM)
STANDARD RIBBON
18910000
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
24 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Epson B-310N (Inkjet)
COMPATIBLE MATERIAL
STANDARD INK
DURA BRITE ULTRA (Epson ink)
Raymark A4 sheets
(Recommended for enhanced humidity resistance)
Epson Stylus Photo R285 (Inkjet)
PRINTER
STANDARD INK
Claria Photographic ink (Epson ink)
Raymark A4 sheets
Epson Stylus Colour 1520 (Inkjet)
PRINTER
Raymark 1
Raymark A4 Sheets
STANDARD INK
Chess (Black). Abacus (Cyan, Magenta,
Yellow). Epson ink
Chess (Black). Abacus (Cyan, Magenta,
Yellow). Epson ink
BTT-02 (card printer)
COMPATIBLE MATERIALS
STANDARD RIBBON
BGS
BGF
BBB-060SC/200 (black).
BET
BBB-060WE/200 (white).
BTS
BBB-060BL/200 (blue).
BBK
BBB-060RT/200 (red).
BBL
BBS
BKB
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
25 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Ribbon ordering details
Cable Identification markers (25.4MM ID core)
DESCRIPTION
TE PART NUMBER
1330-3300-10
1966-RIBBON
LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less)
2000P-RIBBON-4TT-MED
980892-000
F55931-000
6-1768383-4
893803-000
277493-000
311292-000
557721-000
754073-000
154739-000
650784-000
124503-000
742412-000
EC8932-000
2000P-RIBBON-4TT-NAR
TMS-RJS-RIBBON-4DSCE
TMS-RJS-RIBBON-4RPSCE
TMS-RJS-RIBBON-4HT
T300-RIBBON-WH-4HT
T300-RIBBON-WH (White)
TMS-RJS-RIBBON-4AG (Silver)
1330-0607-10
T300-UV-SCE-RIBBON
Cable Identification markers (12.7MM ID core)
DESCRIPTION
TE PART NUMBER
TMS-101-RIBBON-4DSCE
T200-RIBBON-1966
1330-0607-T200
TMS-101-RIBBON-4HT
505478-000
D60849-000
E45478-000
746617-000
086961-000
310109-000
117366-000
252557-000
T200-RIBBON-WH-4HT
TMS-101-RIBBON-4RPSCE
T200-RIBBON-WH
TMS-101-RIBBON-4AG
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
26 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
Labels (25.4MM ID core)
DESCRIPTION
TE PART NUMBER
1330-0607-10
742412-000
2-1768049-6
3-1768049-0
C75514-000
3-1768049-6
2-1768049-7
3-1768049-4
3-1768049-7
952888-000
3-1768049-8
143060-000
557721-000
980892-000
TTB-060SC/300
TTB-076SC/300
TTB-084SC/300
TTB-110SC/300
TTB-060SC/450AQ529
TTB-090SC/360-AQ529
TTB-110SC/300AQ529
1330-0619-10
TTB-110SC/300WH
1330-0600-10
TMS-RJS-RIBBON-4RPSCE
1330-3300-10
Labels (12.7MM ID core)
DESCRIPTION
TE PART NUMBER
1330-0607-T200
1330-0619-T200
TMS-101-RIBBON-4RPSCE
1330-3300-101TT
E45478-000
C49013-000
310109-000
C95590-000
1-1768384-8
C36369-000
1330-TTB-T200
1330-0600-T200
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
27 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
Doc. No: 411-121005
Issue: 12
Date: May 2013
IDENTIFICATION PRINTER PRODUCT
RIBBON MATRIX
BTT-02 (card printer)
DESCRIPTION
TE PART NUMBER
BBB-060SC/200 (black).
1-1768016-4
1-1768016-5
1-1768016-1
1-1768016-3
BBB-060WE/200 (white).
BBB-060BL/200 (blue).
BBB-060RT/200 (red).
Trademarks
TMS, TE Connectivity (TE) logo and Tyco Electronics are trademarks of the Tyco Electronics
group of companies and its licensors. Other products, logos, and Company names mentioned
herein may be trademarks of their respective owners.
Kapton and Tedlar are trademarks of E I du Pont de Nemours & Company for polymide films.
Related Documents:
404-121000 WinTotal Ribbon List
Author: I. Ridgeway
Print date: 14-May-13
Issue date: May 2013:
Page:
28 of 28
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled