TECHNICAL DATA SHEET
Document number: TTDS-020
Issue: 4
Date: January 2013
HT-SCE Heat shrinkable sleeves
MATERIAL DESCRIPTION:
Thin wall, flame retarded radiation cross-linked fluoropolymer heatshrinkable sleeve, assembled as organized cut sleeves in a “ladder”
configuration. 2:1 shrink ratio.
USE:
Identification of wires and cables by computer-based printing onto
sleeves. Sleeves can also provide terminal insulation and strain
relief. Suitable for many high temperature applications, especially
military and aerospace applications. Can be used in space
applications where low vacuum outgassing is required.
PRINTING SYSTEM:
Refer to TE document 411-121005 IDENTIFICATION PRINTER
PRODUCT RIBBON MATRIX for the recommended
printer/product/ribbon combination
SERVICE TEMPERATURE:
-55C to +225C (-67F to +437F).
MINIMUM RECOVERY
TEMPERATURE:
135C (275F).
MAXIMUM STORAGE
TEMPERATURE:
40C (104F).
COLORS:
White or black.
HEAT AGEING:
No cracking and print legible after 168 hours at 225C (437F).
HEAT SHOCK:
No cracking, dripping or flowing and print legible after
4 hours at 275C (527F).
TEMPERATURE CYCLING:
No cracking, dripping or flowing and print legible after 6 cycles from
-196C (-320F) to +200C (+392F).
ULTIMATE ELONGATION:
200% minimum (ASTM D2671).
TENSILE STRENGTH:
24MPa minimum (ASTM D2671).
MOLD GROWTH:
Rating 1 maximum (ASTM G21).
FLAMMABILITY:
UL 224 VW-1 rated
If the document is printed it becomes uncontrolled
Check with TE Connectivity (TE) for latest version
Author: L Smith
Issue date: Jan 2012
Page:
1 of 2
While TE Connectivity Ltd. has made every reasonable effort to ensure the accuracy of the information in this document, TE does
not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is
accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any
time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not
limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for
reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE
for the latest dimensions and design specifications.
TECHNICAL DATA SHEET
Document number: TTDS-020
Issue: 4
Date: January 2013
VACUUM OUTGASSING:
HT-SCE Heat shrinkable sleeves
CORROSIVE EFFECT
(COPPER MIRROR):
1% maximum Total Mass Loss (TML) after 24 hours at 130C
(266F); pressure
很抱歉,暂时无法提供与“CA7153-000”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 7+52.742647+6.54270
- 70+46.5483470+5.77430
- 150+45.72851150+5.67260
- 300+44.81758300+5.55960
- 3000+43.906663000+5.44660
- 5000+33.157735000+4.11320
- 10000+26.8723310000+3.33350
- 25000+20.4958525000+2.54250