CUSTOMER DRAWING
Product
Name
Color
Marking
D-406-0034
Yellow
DURASEAL® 24-26
D-406-0001
Red
DURASEAL® 18-22
D-406-0002
Blue
DURASEAL® 14-16
D-406-0003
Yellow
DURASEAL® 10-12
Size Range
mm2
(AWG)
0.15 – 0.25
(26 - 24)
0.5 - 1.0
(22 - 18)
1.5 - 2.5
(16 - 14)
3.0 - 6.0
(12 - 10)
L1
1.50
[0.06)
31.5
[1.24]
31.5
[1.24]
31.5
[1.24]
37.5
[1.48]
L2
min
5.0
[0.20]
5.0
[0.20]
5.0
[0.20]
10.0
[0.39]
øA*
(a)
(b)
min
max
3.00
1.40
[0.118]
[0.055]
3.70
1.40
[0.146]
[0.055]
4.60
2.00
[0.181]
[0.080]
6.50
2.80
[0.255]
[0.110]
øB
min
1.09
[0.043]
1.47
[0.058]
2.33
[0.092]
3.50
[0.138]
Wire Strip
Length
Nom.
6 to 8
(1/4 to 5/16)
6 to 10
(1/4 to 3/8)
6 to 10
(1/4 to 3/8)
10 to 13
(3/8 to 1/2)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked polyamide (Nylon) with a polyamide-based hot-melt
adhesive liner. See above table for applicable sleeve color.
2. CRIMP SPLICE: Tin-plated copper alloy.
BASE METAL: Copper alloy C11000 per ASTM B152.
PLATING: Tin-plated per ASTM B545, Class A.
APPLICATION
1. These parts may be used to obtain an environment-resistant one-to-one in-line (butt) splice in wires meeting the size range and
diameter restraints specified herein and having a temperature rating of not less than 85C.
2. * øA: (a) Minimum diameter as received: Wire insulation diameter must be less than this value.
(b) Maximum diameter after recovery: Wire insulation diameter must be larger than this value to obtain an environment
resistant splice.
3. Wires are to be stripped per table, inserted into opposite ends of the crimp barrel, crimped with a TE Connectivity AD-1522 (22-10
AWG) or equivalent. For D-406-0034, Pro-Crimper III with die set 1976357-1 (24-26 AWG) or equivalent may be used. The
sleeve must be heated along its entire length until the crimp marks are gone and the ends of the sleeve recover onto the wires.
4. Spliced assemblies will meet the requirements of TE Connectivity / Raychem specification RB-107.
5. Except for D-406-0034, all of the parts covered by this drawing are UL Listed (US and CANADA), File #E87681.
TITLE:
DURASEAL CRIMP SPLICE
ENVIRONMENT RESISTANT
Raychem
Devices
Unless otherwise specified dimensions are in millimeters. Inches dimensions
are shown in [brackets].
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
ANGLES: N/A
P. TALLY
06090
ROUGHNESS
IN MICRON
CAGE CODE:
Tyco Electronics reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
DRAWN DATE:
ECO No.:
1/28/2008
ECO-18-019635
DOCUMENT NO.:
D-406-00XX
REV.:
REV DATE:
13-Dec-2018
C3
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 2018 TE Connectivity Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision.
很抱歉,暂时无法提供与“CC2645-000”相匹配的价格&库存,您可以联系我们找货
免费人工找货