Instruction Sheet
Global Dimensional Life for
Raychem* Heat Shrink Tubing
Standard Size1 Products
408-32191
1 FEB 2023 Rev L
1. INTRODUCTION
The guidelines listed in Table 1 are applicable to Appliance Tubing products.
DIMENSIONAL LIFE
(Months)2
STORAGE
CONDITIONS2
AP-2000
60
0°C to 35°C
ATUM
60
0°C to 35°C
BATTU
36
0°C to 35°C
BRST
144
0°C to 35°C
BSTS
144
0°C to 35°C
BSTS-FR
48
0°C to 35°C
CGAT
60
0°C to 35°C
CGPE-105
144
0°C to 35°C
CGPE-HW
144
0°C to 35°C
CGPT
144
0°C to 35°C
CRN
144
0°C to 35°C
DCPT
144
0°C to 35°C
DWFR
60
0°C to 35°C
DWHF
60
0°C to 35°C
DWP-125
60
0°C to 35°C
DWTC
36
0°C to 30°C
EFSET
144
0°C to 35°C
ES1000
36
0°C to 35°C
ES2000
36
0°C to 35°C
ES-CAPS
36
0°C to 35°C
ES-SLV
36
0°C to 35°C
ESZH
36
0°C to 35°C
EVSW
144
0°C to 35°C
FB2
144
0°C to 35°C
FILS-125
36
0°C to 35°C
FL2500
36
0°C to 35°C
HF
144
0°C to 35°C
HFT5000
144
0°C to 35°C
HRHF
144
0°C to 35°C
HRHT
36
0°C to 35°C
HRNF
144
0°C to 35°C
PRODUCT
Table 1 (cont’d)
© 2019 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject tochange.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 4
408-32191
PRODUCT
HRSR
DIMENSIONAL LIFE
(Months)2
STORAGE
CONDITIONS2
144
0°C to 35°C
HT-200
144
0°C to 35°C
HTAT
36
0°C to 35°C
LSTT
144
0°C to 30°C
NETM1000
144
0°C to 35°C
NETM2000
144
0°C to 35°C
36
0°C to 30°C
PD CAPS
144
0°C to 35°C
QS1500
60
0°C to 35°C
QSAP-Cross
36
0°C to 35°C
QSAP
36
0°C to 35°C
PTCM
QSZH
36
0°C to 35°C
RAYFLEX
144
0°C to 35°C
RAYRIM
36
0°C to 35°C
RBK-85-kits
36
0°C to 35°C
RBK-105-kits
36
0°C to 35°C
RBK-ESS-CROSS
36
0°C to 35°C
RBK-ESS-RING
36
0°C to 35°C
RBK-ILS-125
36
0°C to 35°C
RBK-MTS
36
0°C to 35°C
RBK-RTP-125
36
0°C to 35°C
RBK-VWS-125
36
0°C to 35°C
RHW
60
0°C to 35°C
RMW
60
0°C to 35°C
RNF-100
144
0°C to 35°C
RNF-150
144
0°C to 35°C
RNF-3000
144
0°C to 35°C
RP-4800
144
0°C to 35°C
RPPM
36
0°C to 30°C
RPT-120
60
0°C to 35°C
RT-3
144
0°C to 35°C
RT-218
144
0°C to 35°C
RT-220
144
0°C to 35°C
RT-375
144
0°C to 35°C
RTST-105
60
0°C to 35°C
RW-125
144
0°C to 35°C
Table 1 (cont’d)
Rev L
2 of 4
408-32191
PRODUCT
DIMENSIONAL LIFE
(Months)2
STORAGE
CONDITIONS2
RW-175
RW-175-E
SAS S1017
144
144
36
0°C to 35°C
0°C to 35°C
0°C to 35°C
SAS S1124
60
0°C to 35°C
SAS S1030
60
0°C to 35°C
SAS S1136
60
0°C to 35°C
SAS S1048
36
0°C to 35°C
SASR
36
0°C to 35°C
SCL
144
0°C to 35°C
SCT
36
0°C to 35°C
SST
144
0°C to 35°C
SEP-PAK
144
0°C to 35°C
SST-FR
36
0°C to 35°C
SWFR X2
144
0°C to 35°C
SWFR X4
144
0°C to 35°C
TAK-Sleeves
36
0°C to 35°C
TAT-125
60
0°C to 35°C
TC-Caps
144
0°C to 35°C
TEH
36
0°C to 35°C
TFE/TFER
48
0°C to 35°C
TPEM
36
0°C to 35°C
TSAS
36
0°C to 35°C
TUGA
144
0°C to 35°C
URHT
36
0°C to 35°C
VERSAFIT
144
0°C to 35°C
VERSAFIT V2
144
0°C to 35°C
VERSAFIT V4
144
0°C to 35°C
VERSAFIT-3X
144
0°C to 35°C
VERSAFLEX
144
0°C to 35°C
VERSAFLEX-FR
144
0°C to 35°C
VERSAFLEX-FR-UL
144
0°C to 35°C
VKT
144
0°C to 35°C
X2
144
0°C to 35°C
X4
144
0°C to 35°C
XFFR
144
0°C to 35°C
ZH-100
144
0°C to 35°C
No Exposure to Exhaust Gases
Table 1 (end)
Rev L
3 of 4
408-32191
NOTES:
1Shelf Life
is based on standard size products. For over-expanded or special size products, please consult TE Connectivity.
2When
stored properly in the original unopened packaging, out of direct sunlight and at normal room temperature (18°C to 35°C [65°F to 95°F]) unless otherwise noted.
Product should not be transported at temperatures above the storage temperature. If exposed to lower than 0 °C during transportation the product should be raised to
Room temperature before use to minimize any influence of condensation.
The above are guidelines only based on 30 years of experience. TE Connectivity cannot provide any test data to validate the above.
While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any
other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information
contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIESREGARDING THE INFORMATION CONTAINED HEREIN,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be
liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of
recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with
the use of the information.
2. REVISION SUMMARY
Rev A: Initial release of document.
Rev B, 8/29/19: Added BATTU, CGPE-HW, ES-SLV, FB2, RTSD-105, RW-125, SAS S1136, SASR, SWFR
X2, SWFR X4, TEH, VKT, X2 and X4. Removed ZH2 and ZH4.
Rev C, 12/19/19: Added EFSET, FILS-125, and SEP-PAK. Removed AP2000 (replaced by AP-2000), MIL-
Rev D, Updated Note 2 of shelf life to add transportation to the storage condition requirements.
Rev E, Updated the time for TFER/TFER to 48 months.
Rev F, Updated the revisions on the bottom of the page.
Rev G, Corrected typo. No content changes
Rev H, Add TC-Caps
Rev J, Add DWHF
Rev K, Add ESZH
Rev L, Add EVSW
LT, NYLON, FLT, TAT-NYLON, and TAK-CAPS.
Rev L
4 of 4