CGPT-38/19-0-SP

Instruction Sheet Global Dimensional Life for Raychem* Heat Shrink Tubing Standard Size1 Products 408-32191 1 FEB 2023 Rev L 1. INTRODUCTION The guidelines listed in Table 1 are applicable to Appliance Tubing products. DIMENSIONAL LIFE (Months)2 STORAGE CONDITIONS2 AP-2000 60 0°C to 35°C ATUM 60 0°C to 35°C BATTU 36 0°C to 35°C BRST 144 0°C to 35°C BSTS 144 0°C to 35°C BSTS-FR 48 0°C to 35°C CGAT 60 0°C to 35°C CGPE-105 144 0°C to 35°C CGPE-HW 144 0°C to 35°C CGPT 144 0°C to 35°C CRN 144 0°C to 35°C DCPT 144 0°C to 35°C DWFR 60 0°C to 35°C DWHF 60 0°C to 35°C DWP-125 60 0°C to 35°C DWTC 36 0°C to 30°C EFSET 144 0°C to 35°C ES1000 36 0°C to 35°C ES2000 36 0°C to 35°C ES-CAPS 36 0°C to 35°C ES-SLV 36 0°C to 35°C ESZH 36 0°C to 35°C EVSW 144 0°C to 35°C FB2 144 0°C to 35°C FILS-125 36 0°C to 35°C FL2500 36 0°C to 35°C HF 144 0°C to 35°C HFT5000 144 0°C to 35°C HRHF 144 0°C to 35°C HRHT 36 0°C to 35°C HRNF 144 0°C to 35°C PRODUCT Table 1 (cont’d) © 2019 TE Connectivity family of companies All Rights Reserved *Trademark PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject tochange. For latest revision and Regional Customer Service, visit our website at www.te.com. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 1 of 4 408-32191 PRODUCT HRSR DIMENSIONAL LIFE (Months)2 STORAGE CONDITIONS2 144 0°C to 35°C HT-200 144 0°C to 35°C HTAT 36 0°C to 35°C LSTT 144 0°C to 30°C NETM1000 144 0°C to 35°C NETM2000 144 0°C to 35°C 36 0°C to 30°C PD CAPS 144 0°C to 35°C QS1500 60 0°C to 35°C QSAP-Cross 36 0°C to 35°C QSAP 36 0°C to 35°C PTCM QSZH 36 0°C to 35°C RAYFLEX 144 0°C to 35°C RAYRIM 36 0°C to 35°C RBK-85-kits 36 0°C to 35°C RBK-105-kits 36 0°C to 35°C RBK-ESS-CROSS 36 0°C to 35°C RBK-ESS-RING 36 0°C to 35°C RBK-ILS-125 36 0°C to 35°C RBK-MTS 36 0°C to 35°C RBK-RTP-125 36 0°C to 35°C RBK-VWS-125 36 0°C to 35°C RHW 60 0°C to 35°C RMW 60 0°C to 35°C RNF-100 144 0°C to 35°C RNF-150 144 0°C to 35°C RNF-3000 144 0°C to 35°C RP-4800 144 0°C to 35°C RPPM 36 0°C to 30°C RPT-120 60 0°C to 35°C RT-3 144 0°C to 35°C RT-218 144 0°C to 35°C RT-220 144 0°C to 35°C RT-375 144 0°C to 35°C RTST-105 60 0°C to 35°C RW-125 144 0°C to 35°C Table 1 (cont’d) Rev L 2 of 4 408-32191 PRODUCT DIMENSIONAL LIFE (Months)2 STORAGE CONDITIONS2 RW-175 RW-175-E SAS S1017 144 144 36 0°C to 35°C 0°C to 35°C 0°C to 35°C SAS S1124 60 0°C to 35°C SAS S1030 60 0°C to 35°C SAS S1136 60 0°C to 35°C SAS S1048 36 0°C to 35°C SASR 36 0°C to 35°C SCL 144 0°C to 35°C SCT 36 0°C to 35°C SST 144 0°C to 35°C SEP-PAK 144 0°C to 35°C SST-FR 36 0°C to 35°C SWFR X2 144 0°C to 35°C SWFR X4 144 0°C to 35°C TAK-Sleeves 36 0°C to 35°C TAT-125 60 0°C to 35°C TC-Caps 144 0°C to 35°C TEH 36 0°C to 35°C TFE/TFER 48 0°C to 35°C TPEM 36 0°C to 35°C TSAS 36 0°C to 35°C TUGA 144 0°C to 35°C URHT 36 0°C to 35°C VERSAFIT 144 0°C to 35°C VERSAFIT V2 144 0°C to 35°C VERSAFIT V4 144 0°C to 35°C VERSAFIT-3X 144 0°C to 35°C VERSAFLEX 144 0°C to 35°C VERSAFLEX-FR 144 0°C to 35°C VERSAFLEX-FR-UL 144 0°C to 35°C VKT 144 0°C to 35°C X2 144 0°C to 35°C X4 144 0°C to 35°C XFFR 144 0°C to 35°C ZH-100 144 0°C to 35°C No Exposure to Exhaust Gases Table 1 (end) Rev L 3 of 4 408-32191 NOTES: 1Shelf Life is based on standard size products. For over-expanded or special size products, please consult TE Connectivity. 2When stored properly in the original unopened packaging, out of direct sunlight and at normal room temperature (18°C to 35°C [65°F to 95°F]) unless otherwise noted. Product should not be transported at temperatures above the storage temperature. If exposed to lower than 0 °C during transportation the product should be raised to Room temperature before use to minimize any influence of condensation. The above are guidelines only based on 30 years of experience. TE Connectivity cannot provide any test data to validate the above. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIESREGARDING THE INFORMATION CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with the use of the information. 2. REVISION SUMMARY  Rev A: Initial release of document.  Rev B, 8/29/19: Added BATTU, CGPE-HW, ES-SLV, FB2, RTSD-105, RW-125, SAS S1136, SASR, SWFR X2, SWFR X4, TEH, VKT, X2 and X4. Removed ZH2 and ZH4.  Rev C, 12/19/19: Added EFSET, FILS-125, and SEP-PAK. Removed AP2000 (replaced by AP-2000), MIL-  Rev D, Updated Note 2 of shelf life to add transportation to the storage condition requirements.  Rev E, Updated the time for TFER/TFER to 48 months.  Rev F, Updated the revisions on the bottom of the page.  Rev G, Corrected typo. No content changes  Rev H, Add TC-Caps  Rev J, Add DWHF  Rev K, Add ESZH  Rev L, Add EVSW LT, NYLON, FLT, TAT-NYLON, and TAK-CAPS. Rev L 4 of 4