CH6881-000

CH6881-000 Joints & Splices, EMEA / ASIA / ANZPAC, Cold Shrink / Cold Applied, ≤ 1 kV, LV Gel Joint, Cross-Section Range 1.5 – 6 mm², Polymeric CH6881-000  ACTIVE Raychem TE Internal #: CH6881-000 Joints & Splices, EMEA / ASIA / ANZPAC, Cold Shrink / Cold Applied, ≤ 1 kV, LV Gel Joint, Cross-Section Range 1.5 – 6 mm², Polymeric View on TE.com > Energy & Power > Power Cable Accessories > Joints & Splices Joints & Splice Product Availability: AMERICAS, ANZPAC, ASIA, China, EMEA Joints & Splice Technology: Cold Applied, Cold Shrink Joints & Splice Voltage Class: ≤ 1 kV Joints & Splice Product Type: LV Gel Joint Cross-Section Range: 1.5 – 6 mm² Features Product Type Features Case Seal Gel Tap Geometry Parallel Filler PowerGel Cable Seal Gel Joints & Splice Technology Cold Applied, Cold Shrink Joints & Splice Product Type LV Gel Joint Insulation Polymeric Mechanical Connectors Included Yes Closing Method Snap Connector Type Connector Block Strain Relief Yes Configuration Features Number of Branch Wires (Max) 5 Number of Main Wires (Max) 5 Electrical Characteristics Joints & Splice Voltage Class ≤ 1 kV Body Features  Partition Orientation For support call+1 800 522 6752 Horizontal/Vertical 08/18/2021 06:28PM | Page 1 CH6881-000 Joints & Splices, EMEA / ASIA / ANZPAC, Cold Shrink / Cold Applied, ≤ 1 kV, LV Gel Joint, Cross-Section Range 1.5 – 6 mm², Polymeric Partition Orientation Horizontal/Vertical Color Black Dimensions Branch Cable Diameter (Min) 9 mm Cable Diameter (Min) (Main) 8 mm Branch Cable Cross-Section (Max) 6 mm² Branch Cable Diameter (Max) 21 mm Branch Cable Cross-Section (Min) 1.5 mm² Cross-Section Range 1.5 – 6 mm² Cable Cross-Section (Max) (Main) 6 mm² Cable Cross-Section (Min) (Main) 1.5 mm² Cable Diameter (Max) (Main) 22 mm Usage Conditions Operating Temperature Range -20 – 55 °C Chemical Resistance Water & Humic Acids Operation/Application Non-Toxic & Non-Corrosive Emission Isocyanate-Free Yes Solvent-Free Yes Marine-Offshore-Shipbuilding Certified No Emission Free Label-Free Acc (REACH & CLP) Yes Low Smoke Emission No Halogen Free Yes UV-Stabilized Yes Silicone-Free No Free of Lead, Cadmium, Heavy Metals Yes Industry Standards CSA Certified No Standards EN 50393 UL Rating No Product Availability  Joints & Splice Product Availability AMERICAS, ANZPAC, ASIA, China, EMEA Minimum Order Quantity 1 Packaging Features For support call+1 800 522 6752 08/18/2021 06:28PM | Page 2 CH6881-000 Joints & Splices, EMEA / ASIA / ANZPAC, Cold Shrink / Cold Applied, ≤ 1 kV, LV Gel Joint, Cross-Section Range 1.5 – 6 mm², Polymeric Packaging Features Minimum Packaging Unit 1 Packaging Quantity 1 Packaging Method Cardbox Other Other Colors Available No Product Use Outdoor, Overhead & Direct Buried Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2021 (211) Candidate List Declared Against: JUN 2018 (191) SVHC > Threshold: Not Yet Reviewed Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts  For support call+1 800 522 6752 08/18/2021 06:28PM | Page 3 CH6881-000 Joints & Splices, EMEA / ASIA / ANZPAC, Cold Shrink / Cold Applied, ≤ 1 kV, LV Gel Joint, Cross-Section Range 1.5 – 6 mm², Polymeric TE Part # CH6882-000 TE Part # CH6880-000 TE Part # CH6879-000 TE Part # EH9930-000 RAYGEL-PLUS-3 RAYGEL-PLUS-1 RAYGEL-PLUS-0 RAYGEL-PLUS-1.5 TE Part # EH9931-000 TE Part # EH9932-000 RAYGEL-PLUS-1.5-D RAYGEL-PLUS-1.5-CB5 Customers Also Bought TE Part #T4112002081-000 TE Part #170347-005 TE Part #122998-000 TE Part #122014N001 M12,FEMALE,RA,A CODE,8P,PG9, GOLD OXSU-F3131 MWTM-180/60-1000/S(S5) 603W040/S(S5) TE Part #186727-000 TE Part #087626-000 TE Part #096434-000 TE Part #1-1768050-0 IXSU-F3324 EKM-2040-1D1-5X10 402W533/S(S10) ZUB-01 TE Part #1106408-3 HIP-K.3/4.STO.1.M20.G Documents  Product Drawings For support call+1 800 522 6752 08/18/2021 06:28PM | Page 4 CH6881-000 Joints & Splices, EMEA / ASIA / ANZPAC, Cold Shrink / Cold Applied, ≤ 1 kV, LV Gel Joint, Cross-Section Range 1.5 – 6 mm², Polymeric Product Drawings RAYGEL-PLUS-2 English Datasheets & Catalog Pages RayGel Plus Brochure French RayGel Plus Brochure English RayGel Plus Brochure German RAYGEL PLUS - CABLE JOINTS FILLED WITH POWERGEL FOR SINGLE AND MULTI-CORE POLYMERIC CABLES 0.6/1 KV English  For support call+1 800 522 6752 08/18/2021 06:28PM | Page 5