CJP1000J1K5J

Aluminium Enclosed Resistor Type CJP Series Key Features Up to 1000W power rating Aluminium enclosure Vibration resistant Applications Power supplies Inverters Servo Motors and Drives Warehouse Automation Electrical systems in difficult environments The CJP Series of resistors are an economical and compact aluminium housed resistor with good electrical stability and reliability. With power ratings up to 1000W they are suited to a range of electrical circuits including power supplies, inverters and servo systems. With very good durability and mineral filled construction they are particularly good for braking and other pulse applications. Characteristics – Electrical Type Rated Power (free air) W Oh ic Value Mi . Ω Oh ic Value Max. Ω Tolerance Temperature Coefficient of Resistance (TCR) CJP60 60 0.2 20 CJP100 100 1.0 1.0K CJP120 120 6.0 1.0K 5% CJP150 150 6.0 1.0K CJP200 200 0.5 1.0K CJP300 300 0.5 1.5K ±200PPM/°C Max. 250°C 60W – 5 * Rated Power for 5 seconds >60W 10 * Rated Power for 5 seconds 600VAC / 850VDC 2500VAC 1 Minute 100MΩ i . -25 ~ 250°C 260°C 275°C 275°C 280°C 300°C 350°C 155 190 690 Short Term Overload Limiting element voltage Dielectric Strength Insulation resistance Operating Temperature Max. Surface temp at rated power (free air) Weight g. CJP80 80 0.5 1.0K 225 260 295 510 Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower. 1773309-8 Rev B 06/2022 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Aluminium Enclosed Resistor Characteristics – Electrical (continued) Type Rated Power (free air) W Oh ic Value Mi . Ω Oh ic Value Max. Ω Tolerance Temperature Coefficient of Resistance (TCR) Short Term Overload Limiting element voltage Dielectric Strength Insulation resistance Operating Temperature Max. Surface temp at rated power (free air) Weight g. CJP400 400 0.5 2.0K CJP500 500 0.5 2.0K CJP600 600 1.5 2.0K CJP800 800 1.0 2.0K 5% ±200PPM/°C Max. CJP1000 1000 1.0 2.0K 60W – 5 * Rated Power for 5 seconds >60W 10 * Rated Power for 5 seconds 600VAC / 850VDC 2500VAC MΩ min. -25 ~ 250°C 350°C 380°C 405°C 425°C 450°C 840 1100 1100 1340 1340 Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower. Derating Curve Temperature Rise 1773309-8 Rev B 06/2022 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Aluminium Enclosed Resistor Environmental Characteristics Characteristics Limits Test Methods Insulation Resistance Dry / Normal 500VDC Dielectric Withstand Voltage Short Time Overload Humidity Load Life Vibration Insulation resistance is MΩ i . No evidence of flashover, mechanical damage, arcing, or insulation breakdown ΔR ± % + . Ω Max. with no evidence of mechanical damage ΔR< ± % + . Ω ΔR ± % + . Ω Max. with no evidence of mechanical damage No Mechanical or Electrical Damage 2500VAC for 1 minute Permanent resistance change after the application voltage at ≤ W - 5 x Rated Power for 5sec >60W - 10 x Rated Power for 5 sec 40°C, 90% Rh, 240Hrs Permanent resistance change after 500 hours operating at RCWV with duty cycle of (1.5 hours o , . hour off at room temperature In accordance with IEC 60068-2-6 / Vibration Test as per IEC 61373:2010, Category 1, Class B Dimensions (mm) 1773309-8 Rev B 06/2022 Model L±1 W±1 H±1 C±5 P1±0.5 P2±0.5 CJP60 CJP80 CJP100 CJP120 CJP150 CJP200 CJP300 CJP400 CJP500 CJP600 CJP800 CJP1000 115 140 165 190 215 165 215 265 335 335 400 400 40 40 40 40 40 60 60 60 60 60 60 60 20 20 20 20 20 30 30 30 30 30 30 30 290 290 290 290 290 290 290 290 290 290 290 290 100 125 150 175 200 150 200 250 320 320 385 385 20 20 20 20 20 30 30 30 30 30 30 30 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change Mounting Slot 5 x 10 For Email, phone or live chat, go to: www.te.com/help Aluminium Enclosed Resistor Connection Cable Termination Cables: UL Approved FEP cables for the terminations, based on the resistor current rating (see chart below) With E5 ring terminals Current Rating ≤ Cable Size used A 16 AWG > A&≤ A 14 AWG > A&≤ A 12 AWG Marking: 1 2 3 4 5 Company name or Logo TE Series Number Resistance Value Tolerance Date Code (YYWW) Style of Marking – Laser How To Order CJP 60 Common Part CJP – Aluminium Housed Power resistor Power Rating 1773309-8 Rev B 06/2022 60 80 100 Etc. 60W 80W 100W Dimensions in millimetres unless otherwise specified 1R0 J Tolerance J Resistance Value Connection J - ±5% Ω- 1R0 Ω- 10R Ω - 100R Ω KΩ - 1K0 Dimensions Shown for reference purposes only. Specifications subject to change J - Lead For Email, phone or live chat, go to: www.te.com/help