CM4221-000

TECHNICAL DATASHEET Doc. No: TTDS-236 Issue 1 CM-NMX CM-NMX Light-Weight Military Grade Tie-On Cable Marker Label material Flame resistant meta aramid/PET multilayer sheet. Thickness: 0.28mm nominal Print system Thermal Transfer Printable Recommended system T312M printer with 1330-3300 ribbon Alternate system: TE3124 printer with 1330-3300 ribbon Print performance Print legible after 50 rubs min. RW2531 (In accordance with SAE-AS-5942) Print legible after 50 strokes min. RW2531 (in accordance with MIL-STD-202) Tear strength 25N/mm min. Flammability ATB 15 seconds max. AEB 15mm max. RW2531 RW2531 (in accordance with ASTM D 568) Thermal Properties: Thermal Ageing 168hrs at 175°C Thermal endurance 1000hrs at 135°C Low temperature flexibility No dripping flowing or cracking RW2531 Print legible after 50 rubs min. Print test in accordance with SAE-AS-5942 No dripping flowing or cracking RW2531 Print legible after 50 rubs min. Print test in accordance with SAE-AS-5942 No cracking RW2531 4hrs at -55°C Author: M Priddle Print date: 20-Aug-10 June 2010: Page: 1 of 2 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Doc. No: TTDS-236 Issue 1 TECHNICAL DATASHEET CM-NMX Environmental: Water absorption (24hrs at 23°C) Weatherability (30 days) 5% maximum Print legible RW2531 (in accordance with ASTM D 570) RW2531 (in accordance with ASTM G154-06) Humidity resistance Print legible RW2531 (30 days at 38°C, 95% RH) Chemical resistance: Fluid immersion 24hrs at 23°C JP-8 Aviation gasoline (100/130) Hydraulic fluid (MIL PRF 5606) Lubricating Oil (MIL PRF 7808) IRM 903 Oil Water Salt water (5%) Anti-icing fluid (SAE-AS-8243) Print legible after 20 rubs minimum RW2531 Print test in accordance with SAE-AS-5942 Dip test (5 cycles) IPA 10% sulphuric acid 10% sodium hydroxide Mineral spirits Print legible after 20 rubs minimum RW2531 Print test in accordance with SAE-AS-5942 CM-NMX Meets the requirements of DMS 2325 type I Code C Author: M Priddle Print date: 20-Aug-10 June 2010: Page: 2 of 2 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.