CP8624-000

5022W1041 SPECIFICATION CONTROL DRAWING CHEMINAX Date: 50 OHM, AWG 22, 19 STRANDS OF AWG 34, WATERBLOCKED, COAXIAL CABLE Revision: 9-9-21 C THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS OTHERWISE DESIGNATED. .0315 .095 .112 .128 CHARACTERISTIC IMPEDANCE 50 ± 2 ohms, Method A CAPACITANCE 29.4 pF/ft. (nominal) VELOCITY OF PROPAGATION 69% (nominal) VOLTAGE RATING 1400 volts (rms) (maximum) CONDUCTOR AWG 22, 19 Strands of AWG 34, Tin-Coated Copper DIELECTRIC Modified FEP Color - White ADDITIONAL REQUIREMENTS ELECTRICAL CONDUCTOR RESISTANCE 15.5 ohms/1000 ft. (nominal) INSULATION RESISTANCE (DIELECTRIC) 10,000 megohms (minimum) for 1000 ft. JACKET RESISTANCE 20 megohms (minimum) for 20 meters SHIELD AWG 38, Tin-Coated Copper JACKET FLAWS SPARK TEST IMPULSE TEST 1.0 kV (rms) 6.0 kV (peak) Water Sealant filling shield interstices VOLTAGE WITHSTAND (DIELECTRIC) 5000 volts (rms) (minimum) WATERBLOCK LAYER Non-Woven PET PHYSICAL .318 ± .007 JACKET Thermorad NTFR INSULATION (DIELECTRIC) ELONGATION TENSILE STRENGTH 150% (minimum) 1000 lbf/in2 (minimum) JACKET ELONGATION TENSILE STRENGTH 200% (minimum) 1300 lbf/in2 (minimum) JACKET THICKNESS .095 inch (nominal) SHIELD COVERAGE 90% (minimum) WATERBLOCKING (per Raychem Spec 345) 1 inch³ (maximum) WRAP .004 inch thick (nominal) CABLE IDENTIFICATION: Outer jacket shall be marked in contrasting color at 12 inch (nominal) intervals between marks as follows: “5022W1041 RAYCHEM 06090” Designate outer jacket color with a dash number in accordance with MIL-STD-681. Unless otherwise specified, outer jacket color will be black designated by a "-0" appended to the part number, e.g. 5022W1041-0. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 52.5 lbs/1000 ft. (nominal) ENGINEERING REFERENCE TEMPERATURE RATING 90°C Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Thermorad, Cheminax, Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 Phone: 1-800-522-6752 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2009-2021 TE Connectivity Ltd. family of companies. All Rights Reserved.