CPF0603B953KE1

Thin Film Precision Resistors Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and stability are essential Terminal finish – electroplated 100% matte Sn Applications Communications Industrial Controls The CPF series is a high stability precision chip resistor range offering various power dissipations relating to a wide range of chip sizes. The CPF series offers TCR's down to 15ppm/°C and resistance tolerances to 0.1%. Standard values are within the IEC 63 E96 and E24 value grids. The CPF has accurate and uniform physical dimensions to facilitate placement Instrumentation Medical Electrical Characteristics Chip Size Rated Power @70°C Resistance Range Ω Tolerance Code Letter Selection series Temp. Coefficient (ppm/°C) Code Letter Operating Voltage (Max) Max. Overload Voltage Operating Temp. Range Insulation Resistance dry min. Stability 1773200 CIS WR 07/2015 Min. Max 49R9 4K99 49R9 33K 0201 0.03125W 49R9 4K99 0.5 D 25 E Dimensions in millimetres unless otherwise specified 49R9 33K 1 F 50 C E24 & E96 25 E 15V 30V -55 ~ +155°C >1000MΩ 0.5% Dimensions Shown for reference purposes only. Specifications subject to change 50 C For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability 1773200 CIS WR 07/2015 49R9 12K 0.05 A 15 D 25 E 49R9 69K8 25 E 50 C 25 E 15 D 25 E 4R7 511K 50 C 15 D E24 & E96 50 15 C D 25V 50V -55 ~ +155°C >1000MΩ 0.5% 4R7 1M0 25 E 4R7 1M0 25 E 0603 0.063W 4R7 511K 15 D 4R7 2M0 Dimensions in millimetres unless otherwise specified 25 E 50 C 15 D 25 E 0805 0.1W 4R7 1M0 50 C 1R0 2M0 25 E Dimensions Shown for reference purposes only. Specifications subject to change 50 C 1R0 1M0 1 F 15 D 25 E 4R7 1M0 0.5 D E24 & E96 50 15 C D 100V 200V -55 ~ +155°C >1000MΩ 0.5% 25 E 4R7 511K 0.5 D E24 & E96 50 15 C D 50V 100V -55 ~ +155°C >1000MΩ 0.5% 4R7 511K 1 F 1R0 1M0 0.1 B 50 C 49R9 69K8 0.5 D 0.1 B 4R7 1M0 0.05 A 15 D 4R7 511K 0.1 B 4R7 332K 0.05 A 15 D 0402 0.063W 10R 49R9 255K 69K8 50 C 1R0 2M0 1 F 50 C 15 D 25 E 50 C For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability 1773200 CIS WR 07/2015 4R7 1M0 0.05 A 15 D 25 E 4R7 1M0 50 C 4R7 1M0 0.05 A 15 D 25 E 4R7 1M0 50 C 4R7 1M0 0.05 A 15 D 25 E 15 D 15 D 1206 0.125W 4R7 4R7 2M49 1M0 0.1 B E24 & E96 25 50 15 E C D 150V 300V -55 ~ +155°C >1000MΩ 0.5% 4R7 2M49 0.1 B 25 E 4R7 1M0 25 E 1210 0.25W 4R7 1M0 E24 & E96 50 15 C D 150V 300V -55 ~ +155°C >1000MΩ 0.5% 4R7 3M0 1R0 2M49 0.5 D 1R0 2M49 0.5 D 25 E 2010 0.25W 4R7 1M0 15 D Dimensions in millimetres unless otherwise specified 25 E 50 C 1R0 3M0 0.1 B 50 C 50 C 4R7 1M0 1 F 15 D 25 E Dimensions Shown for reference purposes only. Specifications subject to change 25 E 4R7 1M0 50 C 1R0 2M49 1 F 15 D 25 E 4R7 1M0 0.5 D E24 & E96 50 15 C D 150V 300V -55 ~ +155°C >1000MΩ 0.5% 1R0 2M49 50 C 1R0 3M0 1 F 50 C 15 D 25 E 50 C For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Chip Size Rated Power @70°C Min. Resistance Range Ω Max Tolerance (%) Code Letter Selection series T.C.R. (ppm/°C) Code Letter Max Operating Volt. Max. Overload Volt. Op. Temp. Range Insulation Resistance Stability 4R7 1M0 0.05 A 15 D 25 E 4R7 1M0 4R7 3M0 2512 0.5W 4R7 1M0 1R0 3M0 0.1 B 50 C 15 D 1R0 3M0 0.5 D E24 & E96 50 15 C D 150V 300V -55 ~ +155°C >1000MΩ 0.5% 25 E 4R7 1M0 25 E 1 F 50 C 15 D 25 E 50 C Environmental Characteristics Item Temperature Coefficient of Resistance (TCR) Short Time Overload Requirement Tol. ≤0.05% TOL. >0.05% As per TCRs specified in Electrical Characteristics tables ΔR±0.05% Insulation Resistance ΔR±0.2% >1000 MΩ ΔR±0.05% Endurance ΔR±0.2% >7kΩ ΔR±0.5% Damp Heat with Load ΔR±0.05% ΔR±0.3% Bending Strength ΔR±0.05% ΔR±0.2% Solderability Resistance to Soldering Heat Dielectric Withstand Voltage 95% min. coverage ΔR±0.05% ΔR±0.2% By Type Thermal Shock ΔR±0.05% ΔR±0.25% Low Temperature Operation ΔR±0.05% ΔR±0.2% Test Method MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C JIS-C-5201-1 5.5 RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds MIL-STD-202 Method 302 Apply 100VDC for 1 minute MIL-STD-202 Method 108A 70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” MIL-STD-202 Method 103B 40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” JIS-C-5201-1 6.1.4 Bending amplitude 3 mm for 10 seconds MIL-STD-202 Method 208H 245±5°C for 3 seconds MIL-STD-202 Method 210E 260±5°C for 10 seconds MIL-STD-202 Method 301 Max. overload voltage for 1 minute MIL-STD-202 Method 107G -55°C ~150°C, 100 cycles JIS-C-5201-1 7.1 1 hour, -65°C, followed by 45 minutes of RCWV RCWV(Rated continuous working voltage)= √(P*R) or Max. Operating voltage whichever is lower Storage Temperature: 25±3°C; Humidity < 80%RH 1773200 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Derating Curve Derating Curve Power ratio(%) . 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) Construction and dimensions L D1 W     T  D2    Alumina Substrate  Bottom Electrode (Ag)  Edge Electrode (NiCr)  Barrier Layer (Ni)  Resistor Layer (NiCr)  Overcoat (Epoxy)  Top Electrode ( Ag)  External Electrode (Sn)  Marking Size L (mm) W (mm) T (mm) D1 (mm) D2 (mm) 0201 0402 0603 0805 1206 1210 2010 2512 0.58±0.05 1.00±0.05 1.55±0.10 2.00±0.15 3.05±0.15 3.10±0.15 4.90±0.15 6.30±0.15 0.29±0.05 0.50±0.05 0.80±0.10 1.25±0.15 1.55±0.15 2.40±0.15 2.40±0.15 3.10±0.15 0.23±0.05 0.30±0.05 0.45±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.12±0.05 0.20±0.10 0.30±0.20 0.30±0.20 0.42±0.20 0.40±0.20 0.60±0.30 0.60±0.30 0.15±0.05 0.20±0.10 0.30±0.20 0.40±0.20 0.35±0.25 0.55±0.25 0.50±0.25 0.50±0.25 Size 0201 0402 0603 0805 1206 1210 2010 2512 1773200 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Recommended Land Pattern A B 0.25 0.30 0.50 0.50 0.80 1.00 1.00 1.00 2.00 1.15 2.00 1.15 3.60 1.40 4.90 1.60 Dimensions Shown for reference purposes only. Specifications subject to change Weight (g) (1000 Pcs.) 0.14 0.54 1.83 4.71 9.02 10 23.61 38.06 C 0.40±0.2 0.60±0.2 0.90±0.2 1.35±0.2 1.70±0.2 2.50±0.2 2.50±0.2 3.10±0.2 For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Marking Case sizes 0805 to 2512 IEC 4 Digit Marking: Resistance Code 100R (100Ω) 1000 2K2 (2.2kΩ) 2201 10K (10kΩ) 1002 499K (499kΩ) 4992 100K (100kΩ) 1003 Case Size 0603 E24 3 digit marking – Example 101 = 100R 102=1K0 E24 10 33 11 36 12 39 13 43 15 47 16 51 18 56 20 62 22 68 24 75 27 82 30 91 Case size 0603 E96 3 digit marking – Examples 14C = 13K7 68B = 4K99 68X = 49R9 Code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Code Multiplier E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 A 10⁰ B 10¹ 1773200 CIS WR 07/2015 Code 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 C 10² E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 D 10³ Dimensions in millimetres unless otherwise specified E 10⁴ Code 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 F 10⁵ E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 G 10⁶ H 10⁷ Dimensions Shown for reference purposes only. Specifications subject to change Code 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 X 10⁻¹ E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Y 10⁻² Z 10⁻³ For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Packaging Packing Quantity and Reel Specification Size 0201 0402 0603 0805 1206 1210 2010 2512 ØA ±1.0 178.0 ØB ±1.0 60.0 ØC ±0.7 W ±1.0 T ±1.0 Paper Tape Embossed Plastic Tape 9.5 11.5 1000 / 5000 N/A 13.5 15.5 N/A 4000 13.5 Paper tape Specification Size A ±0.05 B ±0.05 0201 0.40 0.70 0402 0.70 1.16 0603 1.10 1.90 0805 1206 1210 1.60 2.00 2.75 W ±0.10 E ±0.05 F ±0.05 P₁ P₂ ±0.05 8.00 1.75 3.5 4.00 ±0.10 ØD₀ 1.55 ±0.03 2.00 ±0.05 2.00 1.55 ±0.05 4.00 ±0.10 2.37 3.55 3.40 1773200 CIS WR 07/2015 P₀ 4.00 ±0.05 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change 1.60 ±0.10 T 0.42 ±0.02 0.40 ±0.03 0.60 ±0.03 0.75 ±0.05 For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 8gf to 60gf Embossed Plastic Tape Specifications Top Tape ψ D0 E A F B W ψ D1 1.4Min. T P1 Resistor P2 P0 direction of unreeling Emboss Tape Type A B W E F P0 P1 P2 ØD0 T 2010 2.85±0.10 5.45±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 2512 3.40±0.10 6.65±0.10 12.0±0.10 1.75±0.10 5.5±0.05 4.00±0.05 4.00±0.10 2.00±0.05 1.50+0.10 1.00±0.20 Peel force of top cover tape The peel speed shall be about 300mm/min±5% The peel force of top cover tape shall be between 20gf to 80g 1773200 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Thin Film Precision Resistors Reflow Solder Profile Reel dimension (mm) Time of Reflow soldering at maximum temperature point 260°C = 10s Wave Solder Profile Qty / Reel 2000 A ±0.5 2 B ±0.5 13.5 C ±0.5 21 D ±1 60 M ±2 178 W ±1 13.8 Handling Recommendations When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8. When reflow soldering – solder application amount can be adjusted. Thus the land width can be set to W x 1.0 to 1.3. How To Order Time of Wave soldering at maximum temperature point 260°C = 10s 3521 1K0 F Time of Soldering Iron at maximum temperature point 410°C = 5s Common Part Resistance Value T Tolerance Pack Style 1 ohm 1R0 How To Order 3521B CPF 0603 Common Part CPF precision thin film chip resistor Package Size 0201 0402 0603 0805 1773200 CIS WR 07/2015 1206 1210 2010 2512 1K ohm 1000 ohms 1K0 100R Tolerance Value B - ±0.1% D - ±0.5% F - ±1% 1 Meg ohm 100R - 100Ω 1000000 ohms 1K0 - 1000Ω 10K –1M0 10,000Ω Dimensions in millimetres unless otherwise specified F E– 1% JTCR – 5% D – 15PPM E - 25PPM C - 50PPM Dimensions Shown for reference purposes only. Specifications subject to change T – 2000 1 reel Packaging 1 – 1K REEL Blank – 5K REEL For Email, phone or live chat, go to: www.te.com/help