CR0862-000

0024G0024 SPECIFICATION CONTROL DRAWING CHEMINAX 100 OHM, AWG 24, 19 STRANDS OF AWG 36, OPTIMIZED SHIELD, TWINAXIAL CABLE Date 1-16-13 Revision E THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. .0250 .054 ± .003 .036 .125 CONDUCTORS AWG 24, 19 Strands of AWG 36, Silver-Coated High-Strength Copper Alloy DIELECTRICS Rayfoam H Colors - Light Blue/White FILLERS Radiation-Crosslinked, Modified ETFE SHIELD AWG 38, Tin-Coated Copper Optimized ELECTRICAL CHARACTERISTICS CHARACTERISTIC IMPEDANCE 100 ± 7 ohms, Method C at 1 MHz MUTUAL CAPACITANCE 13.5 pF/ft. (nominal) VELOCITY OF PROPAGATION 76% (nominal) CAPACITANCE UNBALANCE 3% (nominal) SURFACE TRANSFER IMPEDANCE 100 milliohms/meter (maximum) (Per MIL-DTL-85485 at 30 MHz) ADDITIONAL REQUIREMENTS ELECTRICAL CONDUCTOR RESISTANCE (prior to cabling) 26.5 ohms/1000 ft. (nominal) INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST IMPULSE TEST 1.0 kV (rms) 6.0 kV (peak) VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms) (minimum) ENVIRONMENTAL .149 (nominal) .153 (maximum) JACKET Modified FEP FLAMMABILITY Method B HEAT SHOCK 225°C LOW TEMPERATURE-COLD BEND -55°C/4.00 inch mandrel VOLTAGE WITHSTAND (Post Environmental) 1000 volts (rms), 1 minute PHYSICAL Outer jacket color will be translucent white (designated by a “-9X" appended to the part number, e.g. 0024G0024-9X) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. INSULATION (DIELECTRIC) (prior to cabling) ELONGATION TENSILE STRENGTH 50% (minimum) 600 lbf/in2 (minimum) JACKET ELONGATION TENSILE STRENGTH 200% (minimum) 2000 lbf/in2 (minimum) JACKET THICKNESS .012 inch (nominal) WEIGHT 18.8 lbs/1000 ft. (nominal) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2013 Tyco Electronics Corporation, All rights reserved.