CRG0201F464K

Thick Film Chip Resistors Type CRG Series Key Features n Thick film resistors with a high power to size ratio,ideally suited to industrial and general purpose use. A range from 1 ohm to 10M and tolerances of 1% and 5%. Also including zero ohm links. n Suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. n Seven Package Sizes n Terminal finish: Matte Sn n MSL Level 2 Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. Final termination is made by electroplating. Characteristics – Electrical Rated Power @ 70 °C (W) 0201 0402 0603 0805 0.05 0.063 0.1 0.125 Resistance Range Min 10 1 11 10 1 (Ohms) Max 1M0 10 1M0 2M0 10 Tolerance (%) 1 5 5 1 5 5 1 1 5 5 1 1 5 5 Code letter F J J F J J F F J J F F J J Selection Series E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 Temp. Coefficient (ppm/°C) ±200 ±400 ±200 ±100 ±400 ±200 ±200 ±100 ±200 ±200 ±200 ±100 ±400 ±200 E96 1 E96 Rated Power @ 70 °C (W) 101 1 11 1 101 E96 1206 2010 0.25 0.5 1 11 E96 2512 1 Resistance Range Min 1 101 1 11 1 101 1 11 1 101 1 11 Ohms Max 100 1M0 10 10M 100 1M0 10 10M 100 1M0 10 10M 5 Tolerance (%) 1 1 5 5 1 1 5 5 1 1 5 Code letter F F J J F F J J F F J J Selection Series E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 Temp. Coefficient (ppm/°C) ±200 ±100 ±400 ±200 ±200 ±100 ±400 ±200 ±200 ±100 ±400 ±200 E96 E96 E96 0201 0402 0603 0805 1206 2010 2512 Working Voltage (V) 25 50 50 150 200 200 200 Max. Overload Voltage (V) 50 100 100 300 400 400 400 2 2 2 Operating Temp. Range (°C) -55 to +125 Climatic Category (°C) 55/125/56 Insulation Resistance Dry Min (Mohms) 1000 Stability (%) Zerohm (A) Current Max Resistance Max 1773204 CIS WR 03/2012 11 3M3 100 1M0 10 10M 100 1M0 10 10M Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. 3 0.5 1