CRGH1206F390K

DRAFT SPECIFICATION Description: CRGH Series High Power Thick Film Chip Resistors Product Type: (Resistance range: 1.0Ω ~ 10MΩ) CRGH0603_XXX (CRGH0603 1/5W +/- 1% & 5% Taped) CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped) CRGH1206_XXX (CRGH1206 1/2W +/- 1% & 5% Taped) CRGH210JXXX (CRGH2010 1W +/- 1% & 5% Taped) CRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped) Approved by Parts corresponding to RoHS Compliant: 2005-Apr.-1 Issued Date: 2008/12/19 CHANGE NOTIFICATION HISTORY Version Date of Version 1 2008/12/19 History Remark CRGH Series CRGH0805_XXX CRGH2512JXXX (CRGH0805 1/3W +/- 1% & 5% Taped) (CRGH2512 2W +/- 1% & 5% Taped 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors 1. Scope: This specification relates to the Tyco Electronics Thick Film Chip Resistors (Lead Free) 2. Type designation: The type designation shall be in the following form: Ex. Type Power Rating CRGH0603 1/5W CRGH0805 1/3W CRGH1206 1/2W CRGH2010 1W CRGH2512 2W Resistance tolerance Nominal Resistance F (1%) J (5%) 1K0 3. Ratings: CRGH0603 CRGH0805 CRGH1206 CRGH2010 CRGH2512 0.20W 0.33W 0.50W 1.0W 2.0W Max. Working Voltage 50 V 150 V 200 V 200 V 250 V Max. Overload Voltage 100 V 300 V 400 V 400 V 500 V Dielectric Withstanding Voltage 300 V 500 V 500 V 500 V 500 V Type Power Rating TempeCRGH0805_XXX (CR -55°C ~ +155°C 70°C Ambient Temperature 3.1 PCRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped) Resistors shall have a power rating based on continuous load operation at an ambient temperature of 70°C. For temperature in excess of 70°C, the load shall be derate as shown in figure 1. Figure 1 3.2 Voltage Rating: Resistors shall have a rated direct-current (DC) continuous working voltage or an approximate sine-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform curresponding to the power rating , as determined from the following formula: RCWV = √P x R Where : RCWV = Rated DC or RMS AC continuous working voltage at commercial-line frequency and waveform (volt) P = Power Rating (watt) R = Nominal Resistance (ohm) In no case shall the rated DC or RMS AC continuous working voltage be greater than the applicable maximum value. Page 1. 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors 4. Construction : 5. Power rating and dimensions CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped) CRGH2512JXXX (CRGH2512 2W +/- 1% & 5% Taped) Dimension : Dimension (mm) Type L W H ℓ1 ℓ2 CRGH0603 1.60 ± 0.10 0.80 + 0.15 - 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 CRGH0805 2.00 ± 0.15 1.25 + 0.15 - 0.10 0.55 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 CRGH1206 3.10 ± 0.15 1.55 + 0.15 - 0.10 0.55 ± 0.10 0.45 ± 0.20 0.45 ± 0.20 CRGH2010 5.00 ± 0.20 2.50 ± 0.15 0.55 ± 0.10 0.60 ± 0.20 0.50 ± 0.20 CRGH2512 6.30 ± 0.20 3.20 ± 0.15 0.55 ± 0.10 0.60 ± 0.20 0.50 ± 0.20 Type Power Rating at 70°C Tolerance % Resistance Range Standard Series TCR CRGH0603 0.20W ±1 1Ω ~ 10MΩ E-96 ±5 ±1 ±5 ±1 ±5 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 10MΩ 1Ω ~ 9.76Ω 10Ω ~ 1.0MΩ 1.1MΩ ~ 10MΩ 1Ω ~ 9.76Ω 10Ω ~ 1.0MΩ 1.1MΩ ~ 10MΩ E-24 E-96 E-24 E-96 E-24 < 10 ±200PPM/°C < 10 ±100PPM/°C Power Rating : CRGH0805 0.33W CRGH1206 0.50W CRGH2010 1.00W ±1 & ± 5 CRGH2512 2.00W ±1 & ± 5 Page 2. E-24 E-24 < 10 ±200PPM/°C < 10 ±100PPM/°C < 10 ±200PPM/°C < 10 ±100PPM/°C ±200PPM/°C ±100PPM/°C ±200PPM/°C ±200PPM/°C ±100PPM/°C ±200PPM/°C 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors 6. Marking : 6.1 Resistors A. ± 5% Tolerance : the first two digits are significant figures of resistance and the third denoted number of zeros. Ex. 333 33K B. For ohmic values below 10 Ω, read alphabet "R" as decimal point. Ex. 2R2 2.2 C. For E-96 series [±1% (F) tolerance] in CRGH0603 size 3 digit system (due to space restrictions) please refer to page 4. for coding formula Ex. 02C D. ±1% Tolerance CRGH0805_XXX 10.2K (CRGH0805 1/3W +/- 1% & 5% Taped) resistance and the fourth digit denoted number of zeros. Letter"R" is for decimal point. Ex. CRGH2 2701 2.7K 10R5 10.5Ω 6.2 Labels Label shall be marked with the following item : Label shall be marked with the following item : A. Nominal Resistance and Resistance Tolerance B. Power Rating and Size C. Quantity D. Part No. E. P.O.No. F. Lot No. Ex. RESISTANCE: 330K Ω WATTAGE: 1/2W SIZE: CRGH0603 QUANTITY: 5,000 PCS Pb-Free PART NO.: CRGH0603F330K RoHS 2002/95/EC LOT NO. : 825723 ± 5% REF # 2456319325 Remark : For CRGH0603 ± 1 % : Label is 332K, value is 332KΩ, marking is 51D ± 5 % : Label is 330K, value is 330KΩ, marking is 334 ± 1 % : Label is 330K, value is 330KΩ, marking is 3303 Page 3. 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors Mutiplier Code : Code Multiplier A B C D E F G H X Y Z 0 1 2 3 4 5 6 7 -1 -2 -3 10 10 10 10 10 10 10 10 10 10 10 Coding Formula XX Example : 10K2 = 102 X 102 02 X Resistance Code Multiplier Code 33R2 = 332 X 10-1 H2512JXXX = 51X X Value Code Value Code Value Code Value Code Value Code 100 01 162 21 261 41 422 61 681 81 102 02 165 22 267 42 432 62 698 82 03 169 23 274 43 442 63 715 83 107 04 174 24 280 44 453 64 732 84 110 05 178 25 287 45 464 65 750 85 (CRGH 06 182 26 294 46 475 66 768 86 115 07 187 27 301 47 487 67 787 87 (CRGH0805 02C C 51 RGH0805_XXX = 118 08 191 28 309 48 499 68 806 88 121 09 196 29 316 49 511 69 825 89 124 10 200 30 324 50 523 70 845 90 127 11 205 31 332 51 536 71 866 91 130 12 210 32 340 52 549 72 887 92 133 13 215 33 348 53 562 73 909 93 137 14 221 34 357 54 576 74 931 94 140 15 226 35 365 55 590 75 953 95 143 16 232 36 374 56 604 76 976 96 147 17 237 37 383 57 619 77 150 18 243 38 392 58 634 78 154 19 249 39 402 59 649 79 158 20 255 40 412 60 665 80 *Marking for CRGH0603 E-96 series, the resistance value that no have multiplier code indicate marking follow this: The first two digits are significant figures of resistance and the third one denoted number of zeros and under line the marking letters. Ex. 122 1.2K Page 4. 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors 7. Performance specification : Characteristics Dielectric withstanding voltage Test Methods ( JIS C 5201-1 ) Limits No evidence of flashover 4.7 Clamped in the trough of a 90°C metallic v-block and mechanical damage, arcing or shall be tested at ac potential respectively specified in insulation break down the type for 60-70 seconds 4.8 Natural resistance change per temp. degree centigrade. R2-R1 Temperature Coefficient See Page 2 R1(t2-t1) x 10 6 (PPM/°C) R1: Resistance value at room temperature (T1) R2: Resistance value at room temp. plus 100°C (T2) Test pattern: room temp. (T1), room temp. +100°C (T2) Short time Overload Resistance change rate is 4.13 Permanent resistance change after the application ± 5% (2.0% + 0.1Ω) Max. of a potential of 2.5 times RCWV for 5 seconds. ± 1% (1.0% + 0.1Ω) Max. Wave Solder: Test temperature of solder: 245°C ±3°C dipping time in solder : 2-3 seconds. Reflow Solder: Solderability Soldering heat 95 % coverage Min. Resistance change rate is: 4.18 Dip the resistor into a solder bath having a temperature ±(1%+0.05Ω) Max. of 260°C ± 3°C and hold it for 10 ± 1 seconds. 4.19 Resistance change after continuous 5 cycles for duty cycle specified below : Temperature cycling Resistance Change Rate Is Step ± 5% (1.0% + 0.05) Max. 1 -55°C ± 3°C 30 mins ± 1% (0.5% + 0.05) Max. 2 Room temp. 10 ~ 15 mins 3 +155°C ± 2°C 30 mins 4 Room temp. 10 ~ 15 mins Resistance change rate is Humidity Terminal Bending 4.24 Temporary resistance change after 240 hours exposure in a humidity test chamber controlled at ± 1% (1.0% + 0.1) Max. 40±2°C and 90-95% relative humidity 7.9 Resistance change after 1,000 hours (1.5 hours "on", ± 5% (3.0% + 0.1) Max. 0.5 hour "off" ) at RCWV in a humidity chamber ± 1% (1.0% + 0.1) Max. controlled at 40°C ± 2°C and 90 to 95% relative humidity Resistance change rate is Load Life Time ± 5% (3.0% + 0.1) Max. Resistance change rate is Load life in Humidty Temperature 4.25.1 Permanent resistance change after 1,000 hours ± 5% (3.0% + 0.1) Max. operating at RCWV, with duty cycle of ± 1% (1.0% + 0.1) Max. (1.5 hours"on", 0.5 hour"off") at 70°C ± 2°C ambient Resistance change rate is 4.33 Twist of Test Board : Y/X = 3/90 mm for 60 seconds ± (1.0% + 0.05) Max. Page 5. 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors 6. Packing specification : 6.1 Taping Dimension (mm) A. Paper tape B. Plastic tape CRGH0805_XXX Type A ± 0.2 B ± 0.2 (CRGH0805 1/3W +/- 1% & 5% Taped) C ± 0.05 ψD +0.1 -0 E ± 0.1 F ± 0.05 G ± 0.1 W ± 0.2 T ± 0.1 CRGH0603 1.10 1.90 2.0 1.5 1.75 3.5 4.0 8.0 0.67 CRGH0805 1.65 2.40 2.0 1.5 1.75 3.5 4.0 8.0 0.81 CRGH1206 2.00 3.60 2.0 1.5 1.75 3.5 4.0 8.0 0.81 CRGH2010 2.80 5.50 2.0 1.5+0.25 1.75 5.5 4.0 12.0 1.2±0.0 CRGH2512 3.60 6.90 2.0 1.5+0.25 1.75 5.5 4.0 12.0 1.2±0.0 7.2 Reel Dimension (mm) A. Paper tape B. Plastic tape Type Packaging Quantity Per Reel A B C D M±2 W±1 T±1 CRGH0603 Paper 5,000 pcs. 2±0.5 13±0.5 21±0.5 60±1.0 178±2.0 10±1.0 - CRGH0805 Paper 5,000 pcs. 2±0.5 13±0.5 21±0.5 60±1.0 178±2.0 10±1.0 - CRGH1206 Paper 5,000 pcs. 2±0.5 13±0.5 21±0.5 60±1.0 178±2.0 10±1.0 - CRGH2010 Plastic 4,000 pcs. 180-3.0 60+1.0 13±0.2 - - 13.5±0.5 15.4±1.0 CRGH2512 Plastic 4,000 pcs. 180-3.0 60+1.0 13±0.2 - - 13.5±0.5 15.4±1.0 Page 6. 2008/12/19--Version: 1 Customer: Part No.: CRGH Series High Power Thick Film Chip Resistors Part Number System Explanation of Part Number System 1 2 3 4 5 6 7 8 9 9 10 10 12 C R G H 0 6 0 3 F 1 0 0 K Series Name Case Size / Wattage: 0603 CRGH Series High Power Thick Film Chip Resistors 0805 F ~ ± 1% 1206 2010 J ~ ± 5% 2512 CRGH0805_XXX CRGH2512JXXX Resistance Value: Tolerance: 1R0 - 1.0 ohm - 100 ohms 1000 ohms 10,000 ohms 100,000 ohms 1,000,000 ohms 100R 1K0 10K 100K 1M0 10M 10,000,000 ohms (CRGH0805 1/3W +/- 1% & 5% Taped) (CRGH2512 2W +/- 1% & 5% Taped) Page7. 2008/12/19--Version: 1