CRGS2512J560K

SMD Anti-Surge Thick Film Chip Resistor Type CRGS Series Key Features Small size and light weight Suitable for both wave and reflow soldering techniques Supplied on tape Can withstand high surge 5 different package sizes Terminal finish matte Sn over Ni TE Connectivity is pleased to introduce this SMD Anti surge thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in five different packages and supplied on tape and real for automatic insertion processes. Standard values – E24 Series Characteristics – Electrical Type Power Rating Resistance Range Tolerance CRGS0603 0.25W 1R0 – 10M T.C.R. Standard Series Max. Working Voltage Max. Overload Voltage Dielectric Withstanding Voltage Temperature Range Storage Temperature 9-1773463-8 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified CRGS0805 0.5W 1R0 – 10M CRGS1206 0.6W 1R0 – 10M ±5% 1Ω-10Ω : ≦±400PPM/℃ 11Ω-10MΩ : ≦±100PPM/℃ CRGS2010 0.75W 1R0 – 10M CRGS2512 1.5W 1R0 – 10M 1Ω-10Ω : ≦±200PPM/℃ 11Ω-10MΩ : ≦±100PPM/℃ E24 50V 150V 200V 200V 250V 100V 300V 400V 500V 500V 300V 500V 500V 500V 500V -55°C ~ +155°C 25°C ± 5°C at a relative humidity of 60%RH ± 10%RH Store in original packaging, out of direct sunlight and not in air with high concentrations of salt or corrosive gases. Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD Anti-Surge Thick Film Chip Resistor Power derating curve Power rating based on continuous load operation in ambient temperature of 70°C. For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve. One Pulse Limiting Electrical Power 9-1773463-8 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD Anti-Surge Thick Film Chip Resistor Lightning Surge Continuous Pulse Construction 9-1773463-8 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD Anti-Surge Thick Film Chip Resistor Dimensions: Type CRGS0603 L 1.60 ±0.10 CRGS0805 2.00 ±0.15 CRGS1206 3.10 ±0.15 CRGS2010 CRGS2512 5.00 ± 0.10 6.35 ± 0.10 W 0.80 +0.15 -0.10 1.25 +0.15 -0.10 1.55 +0.15 -0.10 2.50 ± 0.15 3.20 ± 0.15 Dimension (mm) H 0.45 ±0.10 ℓ1 0.30 ±0.20 ℓ2 0.30 ±0.20 0.55 ±0.10 0.40 ±0.20 0.40 ±0.20 0.55 ±0.10 0.45 ±0.20 0.45 ±0.20 0.55 ±0.10 0.55 ±0.10 0.60 ± 0.25 0.60 ± 0.25 0.50 ± 0.20 1.80 ± 0.25 Marking: For E24 values 0603 ~ 2512 sizes 3 digit marking. The first two digits are significant figures of resistance and the third digit denoted number of zeros Example: 333 33K Ohms Recommended PCB layout plan Type CRGS0603 CRGS0805 CRGS1206 CRGS2010 CRGS2512 9-1773463-8 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified A 1.0 1.3 1.8 3.0 3.7 Dimensions Shown for reference purposes only. Specifications subject to change B 1.0 1.2 1.2 1.5 2.45 C 0.6 1.0 2.2 3.8 2.7 For Email, phone or live chat, go to: www.te.com/help SMD Anti-Surge Thick Film Chip Resistor Packing specification: A Paper tape: Type A ± 0.2 B ± 0.2 C ± 0.05 CRGS0603 CRGS0805 CRGS1206 1.10 1.65 2.00 1.90 2.40 3.60 2.0 2.0 2.0 ØD +0.1 -0 1.5 1.5 1.5 E ± 0.1 F ± 0.05 G ± 0.1 W ± 0.2 T ± 0.1 1.75 1.75 1.75 3.5 3.5 3.5 4.0 4.0 4.0 8.0 8.0 8.0 0.67 0.81 0.81 ØD +0.1 -0 1.5 1.5 B. Embossed Tape: Type A ±0.2 B ±0.2 C ±0.05 CRGS2010 CRGS2512 2.90 3.50 5.60 6.70 2.0 2.0 ØD +0.1 -0 1.5 1.5 E ±0.1 F ±0.05 G ±0.1 W ±0.2 1.75 1.75 5.5 5.5 4.0 4.0 12.0 12.0 T± 0.1 1.0 1.0 Peeling strength of top cover tape Test Condition: 0.1 to 0.7N at a peel off speed of 300mm / min. 9-1773463-8 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help SMD Anti-Surge Thick Film Chip Resistor Reel dimension (mm) Type CRGS0603 CRGS0805 CRGS1206 CRGS2010 CRGS2512 Packaging Paper Paper Paper Embossed Embossed Quantity Per Reel 5,000 pcs. 5,000 pcs. 5,000 pcs. 4,000 pcs. 4,000 pcs. A ± 0.5 B ± 0.5 C ± 0.5 2 2 2 2 2 13 13 13 13 13 21 21 21 21 21 D± 1 60 60 60 60 60 M±2 W±1 178 178 178 178 178 10 10 10 13.8 13.8 Solder Profile Wave solder: 245°C ±3°C dipping time in solder : 2-3 seconds. Reflow Solder How To Order CRGS Common Part CRGS – Anti-Surge Thick Film Chip Resistor 0603 Size 0603 0805 1206 2010 2512 J Tolerance 10K Resistance Value 1 ohm (1Ω) 1R0 1K ohm (1000Ω) 1K0 J - ±5% 100K ohm (100000Ω) 100K 1M ohm (1000000Ω) 1M0 9-1773463-8 CIS WR 07/2015 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help