CS4293-000

SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 17 - December 2023 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film over-laminates and protects the printed area. The label colors conform to TIA-606-D. SBP is supplied with a permanent acrylic based adhesive and on a white liner with reference holes for printer sensor detection. The “self laminating” feature protects the printed area from exposure to fluids, moisture and mechanical abrasion. SBP is UL recognized to PGCT2 and PGCT8 (Canada) for indoor and outdoor use for all colors. SBP is recognized as Wrap Around in accordance with AWM Style 20276, 2560, 2464, 1015 and as Flag in accordance AWM Style 20276, 2560, 2464. For conditions of use see UL file MH65661. The SBP label solution comprises of a complete identification system with printers, software, ribbons and wide range of standard sizes. The label can be used in “WRAP self-laminating” mode and “FLAG self-laminating” mode down to a diameter of 2.0mm (0.08 inch). SBP print performance and durability can only be guaranteed when: • Printed using TE Connectivity printers and ribbons as defined in TE document 411-121005. • Applied on wire & cable using repeatable self-laminated labelling guide 411-121050. PAGE 1 INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET SBP Features Temperature Rating • Thermal Transfer Printable • Operating Temperature Range • Over lamination protects the printed area and enables a higher level of print durability -40 to 110°C (-40°F to 230°F) • Minimum Application Temperature 10°C (50°F) • Range of sizes and colors available (see page 4) • Variety of label layouts and roll core diameters, • Useable down to 2.0mm diameter, even on Fluoropolymer wire jackets. Specifications / Approvals Industry UL recognized PGCT2/8 - file MH65661 - “SBP” Applications Design for Environment • Ideal for wire and cable identification in general. • Does not contain any declarable or prohibited sub- • Excellent conformability to round, irregular or flexible surfaces including flat ribbon cables. • Small diameter cables and wire (2.0mm / 0.08 inch or greater) in wrap mode or flag mode. • Industrial, Automotive, Rail, Aerospace and Defense, Electrical stances from the UNIFE Railway Industry Substances List • Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: http://www.te.com/usa-en/utilities/productcompliance.html Shelf Life 2 years when following good commercial storage practice detailed below. Storage Product should be stored in the original packaging, with any plastic covers which were included during shipping. Store out of direct sunlight in a clean, dry, dust free, environment. Product should be stored at approximately 22°C and 50% relative humidity. PAGE 2 INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET SBP Typical Label Thickness • Label (including adhesive): 0.0105 mm / 0.0041 inch • Liner: 0.080 mm / 0.0031 inch Technical Performance Requirement Results Print Permanence Marking of Electrical Insulating Materials, SAE AS 5942 Legible after 50 rubs 1kg weight with an eraser Pass Resistance to Solvents, MIL STD 202 Method 215 Legible after 30 wipes Pass Fluid Exposure • • • • • • • • • • • Isopropyl alcohol IRM 902 MIL PRF 23699 MIL-H-83282 Diesel Fuel Kilfrost DF plus Tap water 5% Salt solution Detergent (1% solution) Brake fluid Jet A fuel Adhesive Labels to remain on wire and legible / SAE AS 5942 (TE doc 109121012) Wrap and flagged installed samples, 24 hours immersion 23°C followed by 20 rubs Printed legend Pass* Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass *Some loosening of flag possible Adhesion to FTM1 (180°) Typical Peel force (N/25mm (oz/in.)) Test surface: FTM1 (180°) 20min Dwell 72hr Dwell Stainless steel 20 (73) 22 (82) • Glass 17 (62) 21 (75) • Aluminium • Polypropylene • Tufnol • To SBP Label Surface (wrap) • Adhesive to Adhesive (flag) • 9 (32) 18 (64) 9 (32) 9 (32) 15 (53) 20 (73) 17 (64) 23 (83) 20 (73) 20 (73) Flammability Average burn time, ASTM D1000 Burn time less than 10 seconds. Pass, typical burn time 7second Burn rate FMVSS 302 Maximum burn rate 102mm/min. Pass, typical burn rate 35mm/min Weatherability Artificial weathering to ASTM G154 Thermal performance Heat Aging Thermal Cycling Labels to remain on wire and legi- Pass, samples remain legible and do not unwrap or unravel* ble after 3000hr, UV-A and UV-B * Note orange and red may fade under UV, print remains legible. Labels to remain on wire and legi- Pass, samples remain legible and do not ble after 168hr at 90±2°C unwrap or unravel Labels to remain in on wire and legible after 10 cycles of 1hr @ -50°C then 1hr @ 90°C Pass, samples remain legible and do not unwrap or unravel Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. PAGE 3 INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET SBP Ordering Information Standard Layout with left edge sensor slot Part Description SBP 100 225 F WE 5 A C Pack Size in 1000’s E B Label Color Label Length Label Width Product Family Standard Color Code options for all formats BE Blue RD Red GN Green WE White OE Orange YW Yellow D Available Standard Descriptions Supplied on 76mm diameter core. (C) Printable Height (D) Horizontal Repeat inch mm inch mm inch mm inch mm Inch 25.4 1.00 8.5 0.330 16.8 0.662 31.0 1.222 86.0 3.384 0.500 36.5 1.437 12.7 0.500 16.8 0.662 42.2 1.661 86.0 3.384 19.1 0.750 23.9 0.940 9.5 0.375 20.3 0.800 28.6 1.125 85.1 3.350 0.318 20.3 0.800 38.1 1.500 12.7 0.500 22.9 0.900 44.5 1.750 94.9 3.736 7.2 0.283 18.0 0.709 35.0 1.378 13 0.512 20 0.787 38.1 1.500 105.0 4.134 0.080 4.1 0.159 25.4 1.000 19.1 0.750 6.4 0.250 27.9 1.100 25.4 1.000 59.3 2.336 4.0 0.159 7.6 0.298 25.4 1.000 36.5 1.437 12.7 0.500 27.9 1.100 42.2 1.661 87.3 3.436 3 6.1 0.239 12.1 0.477 25.4 1.000 57.2 2.250 19.1 0.750 27.9 1.100 66.7 2.625 87.3 3.436 2,500 3 8.1 0.318 22.2 0.875 25.4 1.000 95.3 3.750 25.4 1.000 27.9 1.100 101.6 4.000 87.3 3.436 SBP100594WE1 1,000 3 12.1 0.477 35.9 1.413 25.4 1.000 150.9 5.940 38.1 1.500 27.9 1.100 158.8 6.250 87.3 3.436 SBP100743WE1 1,000 3 12.1 0.477 48.0 1.890 25.4 1.000 188.9 7.437 38.1 1.500 27.9 1.100 195.3 7.688 87.3 3.436 SBP126591WE1 1,000 3 12.1 0.477 35.9 1.413 32.0 1.260 150.0 5.910 38.1 1.50 33.5 1.319 158.8 6.252 105.0 4.134 SBP190319WE2.5 2,500 2 6.1 0.239 19.7 0.777 48.3 1.900 81.0 3.190 19.1 0.750 50.8 2.000 88.9 3.500 105.1 4.138 SBP190594WE1 1,000 2 12.1 0.477 35.9 1.413 48.3 1.900 151.0 5.940 38.1 1.500 50.8 2.000 158.8 6.250 105.1 4.138 SBP200143WE2.5 2,500 2 4.0 0.159 7.6 0.298 50.8 2.000 36.5 1.437 12.7 0.500 50.8 2.000 42.2 1.661 107.6 4.236 SBP200225WE2.5 2,500 2 6.1 0.239 12.1 0.477 50.8 2.000 57.2 2.250 19.1 0.750 50.8 2.000 66.7 2.625 107.6 4.236 SBP200375WE2.5 2,500 2 8.1 0.318 22.2 0.875 50.8 2.000 95.3 3.750 25.4 1.000 53.3 2.100 101.6 4.000 110.1 4.336 SBP200400WE2.5 2,500 2 8.1 0.318 24.3 0.955 50.8 2.000 101.6 4.000 25.4 1.000 53.3 2.100 108.0 4.250 110.1 4.336 SBP200743WE1 1,000 2 12.1 0.477 48.0 1.890 50.8 2.000 188.9 7.437 38.1 1.500 53.3 2.100 195.3 7.688 110.1 4.336 Product Description Cable O.D. (wrapped)¹ (A) Label Width (B) Label Height Pack Qty Label across Pieces Nb mm inch mm inch mm inch mm SBP050100WE10 10,000 5 2.7 0.105 5.4 0.213 12.7 0.500 SBP050143WE10 10,000 5 4.0 0.159 7.6 0.298 12.7 SBP075094WE10 10,000 4 3.0 0.119 4.6 0.180 SBP080150WE10 10,000 4 4.0 0.159 8.1 SBP091157WE6 6,000 4 4.0 0.159 SBP100075WE5 5,000 2 2.0 SBP100143WE5 5,000 3 SBP100225WE5 5,000 SBP100375WE2.5 Min. Max. (E) Vertical Repeat (F) Web Width ¹see document 411-121050 for recommended wire diameter for flag self lamination application. Other sizes, colors (Grey, Violet and Brown) and pack quantities available, contact TE for more details. INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET PAGE 4 SBP Ordering Information T200 Layout with center sensor slot Part Description 100 225 WE 5 -T200 A E B C SBP F Standard Color Code options for all formats BE Blue RD Red GN Green WE White OE Orange YW Yellow D Supplied on 25.4mm diameter core. Available T200 Descriptions Product Description (C) Printable Height (D) Horizontal Repeat inch mm inch mm inch mm inch mm Inch 25.4 1.00 8.5 0.330 16.8 0.662 31.0 1.222 86.0 3.384 0.500 36.5 1.437 12.7 0.500 16.8 0.662 42.2 1.661 86.0 3.384 20.3 0.800 38.1 1.500 12.7 0.500 22.9 0.900 44.5 1.750 94.9 3.736 0.298 25.4 1.000 36.5 1.437 12.7 0.500 27.9 1.100 42.2 1.661 87.3 3.436 12.1 0.477 25.4 1.000 57.2 2.250 19.1 0.750 27.9 1.100 66.7 2.625 87.3 3.436 0.318 22.2 0.875 25.4 1.000 95.3 3.750 25.4 1.000 27.9 1.100 101.6 4.000 87.3 3.436 12.1 0.477 35.9 1.413 25.4 1.000 150.9 5.940 38.1 1.500 27.9 1.100 158.8 6.250 87.3 3.436 2 4.0 0.159 7.6 0.298 50.8 2.000 36.5 1.437 12.7 0.500 50.8 2.000 42.2 1.661 107.6 4.236 1,000 2 6.1 0.239 12.1 0.477 50.8 2.000 57.2 2.250 19.1 0.750 50.8 2.000 66.7 2.625 107.6 4.236 1,000 2 8.1 0.318 22.2 0.875 50.8 2.000 95.3 3.750 25.4 1.000 53.3 2.100 101.6 4.000 110.1 4.336 500 2 12.1 0.477 48.0 1.890 50.8 2.000 188.9 7.437 38.1 1.500 53.3 2.100 195.3 7.688 110.1 4.336 Cable O.D. (wrapped)¹ (A) Label Width (B) Label Height Pack Qty Label across Pieces Nb mm inch mm inch mm inch mm SBP050100WE5-T200 5,000 5 2.7 0.105 5.4 0.213 12.7 0.500 SBP050143WE5-T200 5,000 5 4.0 0.159 7.6 0.298 12.7 SBP080150WE5-T200 5,000 4 4.0 0.159 8.1 0.318 SBP100143WE2.5-T200 2,500 3 4.0 0.159 7.6 SBP100225WE2.5-T200 2,500 3 6.1 0.239 SBP100375WE1-T200 1,000 3 8.1 500 3 SBP200143WE1-T200 1,000 SBP200225WE1-T200 SBP200375WE1-T200 SBP100594WE0.5-T200 SBP200743WE0.5-T200 Min. Max. (E) Vertical Repeat (F) Web Width ¹see document 411-121050 for recommended wire diameter for flag self lamination application. Other sizes, colors and pack quantities available, contact TE for more details. INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET PAGE 5 SBP Ordering Information Horizontal Layout Part Description 100 225 WE 5 -T200 A E SBP C Standard Color Code options for all formats BE Blue RD Red GN Green WE White OE Orange YW Yellow F Supplied on 25.4 and 76mm diameter core. Also available as –T200 with center sensor holes. Available Horizontal Descriptions Product Description (A) Label Width Cable O.D. (wrapped)¹ (B) Label Height (C) Printable Height (D) Horizontal Repeat (E) Vertical Repeat (F) Web Width Pack Qty Label across Pieces Nb mm inch mm inch mm inch mm inch mm inch mm inch mm inch SBPH100375WE5-2.5 2,500 1 8.1 0.318 22.2 0.875 25.4 1.000 95.3 3.750 25.4 1.000 N/A N/A 28.6 1.250 100.3 3.950 SBPH100375WE1-T200 1,000 1 8.1 0.318 22.2 0.875 25.4 1.000 95.3 3.750 25.4 1.000 N/A N/A 28.6 1.250 100.3 3.950 Min. Max. mm Inch Available Perforated Descriptions Product Description SBP091201WE5 SBP091287WE4 SBP126591WE2 SBP126386WE2 -1P -2P -2P -2P Pieces 5000 4000 2000 2000 Nb 4 4 3 3 Min. 4.9 6.2 12.1 7.8 0.193 0.244 0.477 0.307 mm 11.4 17.0 35.9 23.5 inch 0.449 0.669 1.413 0.925 mm 230 23.0 32.0 32.0 inch 0.906 0.906 1.260 1.260 mm 51.0 73.0 150.0 98.0 inch 2.008 2.874 5.905 3.858 (wrapped)¹ Max. E B Cable O.D. mm inch A C Pack Qty Label across 105mm (4.134inch) Label Width (A) mm 16.0 21.0 34.0 30.0 inch 0.630 0.827 1.339 1.181 mm 25.0 25.0 33.5 33.5 inch 0.984 0.984 1.319 1.319 mm 57.2 79.4 158.8 105.8 inch 2.252 3.126 6.252 4.165 mm 10.0 10.0 10.0 10.0 Inch 0.394 0.394 0.394 0.394 mm N/A 25.0 50.0 33.0 Inch N/A 0.984 1.968 1.299 Z Label Height (B) Y Printable Height (C) D Horizontal Repeat (D) Vertical Repeat (E) Perforation position (Y) Perforation position (Z) ¹see document 411-121050 for recommended wire diameter for flag self lamination application. INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET PAGE 6 SBP Self-laminating in WRAP & FLAG modes WRAP self lamination mode For full details see Installation Instruction 411-121050 FLAG self lamination mode PAGE 7 INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET SBP Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Ribbon Matrix’. This document can be found in ‘Access Our Tools’: https://www.te.com/commerce/DocumentDelivery/ DDEController? Action=showdoc&DocId=Specification+Or+Standard% 7F411-121005%7F32%7Fpdf%7FEnglish% 7FENG_SS_411-121005_32.pdf%7F557721-000vvvvvvv Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: https://www.te.com/usa-en/products/identificationlabeling/printers-software-and-accessories/printingsoftware/wintotal.html?tab=pgp-story Contact a TE representative for further information www.te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2023 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 8 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET