CS8626-000

Document number: TTDS-050 Issue: 4 Date: April 2011 TECHNICAL DATA SHEET DESCRIPTION APPLICATION / USE TTMS (-2X) & TTMS-MP heat-shrinkable identification tubing Thin wall flame retarded radiation cross-linked modified polyolefin heatshrinkable tubing, flattened and spooled. Most sizes of TTMS & TTMS-MP tubing have a 3:1 shrink ratio; TTMS-2X has a 2:1 shrink ratio, see tables 1 & 2 for details. Used in the identification of wires and cables by computer-based printing onto the tube. Tubing can also provide terminal insulation and strain relief. Suitable for a variety of applications, where wiring system complexity is relatively low. TTMS-MP variant is flattened to an oval shape for ease of installation RECOMMENDED PRINTER & RIBBONS New Applications Printer T2000CT-PRINTER or T6112DS-PRINTER (Optional cutter perforator) Ribbon 2000P-4TT (black) or 2000P-4AG (silver) and 2000P-WH (white) Legacy system Printer TMS-2000Plus printer, Ribbon 2000P-4TT (black) or 2000P-4AG (silver) and 2000P-WH (white) Software TE Connectivity WinTotal software v4.5 or later. APPROVALS Tubing meets the material and performance requirements of SAE AMS-DTL-23053/5 Classes 1 & 3. TTMS-2X product also meets dimensional UL recognized Standard 224 (File E35586). CSA certified (File 31929). See TE Connectivity specification RW 2517 for full performance & dimensional details. While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Page 1 of 4 Document number: TTDS-050 Issue: 4 Date: April 2011 PRODUCT SIZE RANGE Table 1: TTMS and TTMS-MP Size TTMS- or TTMS-MP Minimum Internal diameter as supplied mm (inch) Maximum Internal diameter after Full Recovery mm (inch) Wall Thickness After Full Recovery mm ± 0.08 (inch ± 0.003) 2.4 2.4 (3/32) 0.79 (0.031) 0.58 (0.023) 3.2 3.2 (1/8) 1.06 (0.042) 0.58 (0.023) 4.8 4.8 (3/16) 1.57 (0.062) 0.58 (0.023) 6.4 6.4 (1/4) 2.11 (0.083) 0.58 (0.023) 9.5 9.5 (3/8) 3.17 (0.125) 0.61 (0.023) 12.7 12.7 (1/2) 4.21 (0.166) 0.61 (0.024) 19.0 19.0 (3/4) 6.35 (0.250) 0.61 (0.024) 25.4 25.4 (1.0) 8.45 (0.333) 0.64 (0.025) 38.1 38.1 (1.5) 19.0 (0.750) 0.51 (0.020) 50.8 50.8 (2.0) 25.4 (1.000) 0.64 (0.025) Size TTMS-2X Minimum Internal diameter as supplied mm (inch) Maximum Internal diameter after Full Recovery mm (inch) Wall Thickness After Full Recovery mm ± 0.08 (inch ± 0.003) 2.4 2.4 (3/32) 1.20 (0.047) 0.51 (0.020) 3.2 3.2 (1/8) 1.60 (0.063) 0.51 (0.020) 4.8 4.8 (3/16) 2.40 (0.094) 0.51 (0.020) 6.4 6.4 (1/4) 3.20 (0.125) 0.64 (0.025) 9.5 9.5 (3/8) 4.75 (0.187) 0.64 (0.025) 12.7 12.7 (1/2) 6.35 (0.250) 0.64 (0.025) 19.0 19.0 (3/4) 9.50 (0.374) 0.76 (0.030) Table 2: TTMS-2X While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Page 2 of 4 Document number: TTDS-050 Issue: 4 Date: April 2011 PROPERTIES Property Value Test Method Heat Aging 168 hours at 175C (347F). 100% UE retained & Print legible SAE-AMS-DTL-23053/5 Heat Shock 4 hours at 250C (482F) No cracking, dripping or flowing & print legible SAE-AMS-DTL-23053/5 Low temperature Flexibility 4 hours at -55C (-67F), No cracking SAE-AMS-DTL-23053/5 Colors White (-9), yellow (-4) and black (-0) Other colors are available on request. Tensile Strength 10MPa minimum SAE-AMS-DTL-23053/5 Ultimate Elongation 200% minimum SAE-AMS-DTL-23053/5 Longitudinal Change -20% maximum (±5% for TTMS-2X) SAE-AMS-DTL-23053/5 Mold Growth Rating 1 maximum Original tensile strength retained ASTM G21 Water Absorption 0.5% maximum SAE-AMS-DTL-23053/5 Corrosive Copper Mirror Effect Copper Contact Non-corrosive; no pitting or blackening of mirror SAE AMS-DTL-23053 after 16 hours at 175C. (347F) SAE AMS-DTL-23053 Dielectric Strength 20MV/m minimum ASTM D 2671 TTMS(-MP) SAE AMS-DTL-23053 Class 1 UL 224 Rated ASTM D 2671 Procedure B UL 224, All tube flame test TTMS-2X SAE AMS-DTL-23053 Class 1 UL 224 Rated ASTM D 2671 Procedure B UL 224, VW-1 Flammability While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Page 3 of 4 Document number: TTDS-050 Issue: 4 Date: April 2011 PRINT PERFORMANCE PROPERTIES Property Test method Effect SAE AS 81531 clause 4.6.2 (50 rubs) Print Legible Solvent Resistance MIL-STD-202F method 215J Print Legible Fluid Resistance Print Adherence JP 8 (F34) Print Legible Skydrol 500 B4 Print Legible Methyl Ethyl Ketone Print Legible Hydraulic Fluid (MIL PRF 5606) Lubricating Oil (MIL PRF 23699) Diesel Fuel All fluid resistance test samples immersed for 24hrs at 23C (unless otherwise given) then followed by Print Adherence test SAE AS 81531 clause 4.6.2 (20 rubs) Print Legible Print Legible Print Legible Water – 1 Hr at 100°C Print Legible Water – 168 hrs at 23°C Print Legible MIL-A-8243 anti-icing fluid Print Legible ENVIRONMENTAL AND STORAGE PROPERTIES Property Value Maximum storage temperature 40C (104F). Service Temperature -55C to +135C (-67F to +275F). Product is compliant to EU RoHS Directive 2002/95/EC. This compliance information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For the latest compliance status, visit the TE Connectivity RoHS Customer Support Center http://www.te.com/customersupport/rohssupportcenter TE Connectivity (Logo) and TE Connectivity are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Page 4 of 4