DEUTSCH CTJ SERIES
COMMON TERMINATION SYSTEM
AS81714 SERIES II QUALIFIED PRODUCTS OFFER ROBUST AND
HIGHLY RELIABLE WIRE TERMINATION IN DEMANDING ENVIRONMENTS
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
DEUTSCH CTJ Series Common Termination System
AS81714 Series II
Contents
INTRODUCTION
3
MODULES
CTD and CTJ1 Power Distribution and Feedback Modules
6
CTJ4 Series Electronic Component Modules
9
CTJ5 Series Board-Mount/Pluggable Modules
19
CTJ6 and CTJ9 Series Plug and Receptacle Connectors
22
CTJ7 and CTG Series Grounding Modules and Junctions
26
CTL, CTM, and CTN Series In-Line Junctions
29
Composite In-line Junctions
32
Adapter Junctions
35
RAILS
CTJ2 Series Metallic Single-Module Rails
37
CTJ3 Series Metallic Rails
38
DCR Series Composite Rails
40
CONTACTS AND TOOLING
Socket Contacts
42
CTJ Series Tooling
43
CROSS REFERENCE
DEUTSCH CTJ to AS8171
46
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 2
DEUTSCH CTJ Series
Common Termination System
RUGGED
• Many parts qualified to SAE-AS81714
• Integrated bus bar technology
ENVIRONMENTALLY SEALED
• Resists fluids commonly found in
aerospace and defense applications
• Helps prevent foreign object
debris issues
EASY TO USE
• Insertable modules that can be
easily removed and reinserted into
rails with tools
APPLICATIONS
• Commercial Air
• Space
• Military Ground
• Military Aerospace
The DEUTSCH CTJ Series common termination system
from TE Connectivity (TE) is a system of wires and
components that are interconnected to one another by
the use of a standard AS39029 socket contact only. This
eliminates the need for pin contacts which are located in
the mating components. Bussed cavities use our singlepin bus bar design. There are multiple design options
available to customize the modules, junctions, splices
and rails available in Mil Spec-approved AS81714 Series II
and non-qualified proprietary designs.
TE Advantage
DEUTSCH AS39029 Contacts. All assemblies—modules,
splices, etc.—are supplied with DEUTSCH AS39029
socket contacts, which are designed to meet AS39029
standard for ruggedness and vibration resistance.
Customization. Products can be customized to help
meet your specific needs.
Single Rail Assembly. We offer rail assemblies for singlemount components.
Easy Assembly. We offer easy insertion and removal of
single rails inside multimodule assemblies.
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 3
DEUTSCH CTJ Series
Common Termination System
Environmentally Sealed Grommet
Housing
Wire-Applied AS39029 Socket Contact
Integral Pin Contact
Bussed Cavities Single Pin Buss Bar
CTD Bussing Modules for power distribution.
CTJ1 Feedback Modules with various
bussing arrangements.
CTJ4 Electronic Component Modules
design based upon Mil-T-81714/62 electronic
modules. Modules are available with a
variety of diodes, resistors, capacitors, and
fuses, with both M81714/62 equivalents and
additional configurations.
CTJ5 Board-Mount Modules include solder
pin contacts for direct mounting to pc boards
and flex cable. By eliminating the need for
a mounting rail, CTJ5 modules provide a
flexible and compact solution.
CTJ6 Plug and CTJ9 Receptacle Connectors
provide a small, lightweight method of
connecting/disconnecting multiple wires.
Available in flange-mount and in-line versions.
CTJ7 Grounding Modules, using either
flange mount or stud mount, provide sealed
multiwire grounding solutions.
CTJ2 Metallic Mounting Bracket are
aluminum alloy and designed to hold one
single module or two half-size modules.
CTJ3 Metallic Rails use aluminum alloy and
stainless steel clips. They are available with
a variety of finishes and sizes ranging from
2 to 40 inches.
DCR Composite Rails are a lightweight
alternative to CTJ3 rails, offering up to 48%
weight savings and available in lengths
from 2 to 20 inches.
Junctions and Splices
CTL, CTM and CTN In-Line Junctions
connect two to four wires in-line and
multijunctions for housing and sealing
individual components. The CTL is an in-line
junction for single wires. The CTM connects
and buses two, three, or four wires. The CTN
series connects contacts electrically with
diodes, capacitors, fuses, or resistors.
Composite In-Line Junctions are
composite versions of the CTL, CTM, and
CTN series with electronic components
design-in customization.
CTJ Grounding Junctions provide a simple
method of terminating wire to ground using
standard AS39029 contacts.
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 4
DEUTSCH CTJ Series
Common Termination System
CTJ Mil Spec Series General Specifications
The CTJ Mil Spec Series meet requirements
of SAE-AS81714.
Dielectric Withstanding Voltage (AS81714
paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph
3.5.11): 5000 MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Physical Shock: 78 g in each of the 3
mutually perpendicular planes
Vibration: Maintains continuity to minimize
mechanical or physical damage during or
after vibration following vibration levels
Level 1—34 minutes per axis
20–90 Hz at 6 dB/oct. rise
90–300 Hz at 1.0 g2/Hz
300–2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20–40 Hz at 6 dB/oct. rise
40–350 Hz at 0.5 g2/Hz
350–2000 Hz at 6 dB/oct. fall
No discontinuities greater than
1 microsecond
Corrosion: 48 hours of salt spray
Magnetic Permeability: 2.0 max.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Wire Size
Test Current
Voltage Drop
22 AWG
5A
73 mV
20 AWG
7.5 A
55 mV
16 AWG
13 A
50 mV
12 AWG
23 A
42 mV
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact
Wire Range
(AWG)
Current Rating
Size 22
26–22
5A
Size 20
24–20
7.5 A
Size 16
16–20
13 A
Size 12
14–12
23 A
Grommet Sealing Range
Contact Size
Wire OD
Min.
Max.
22
0.030
0.060
20
0.040
0.083
16
0.065
0.109
12
0.097
0.142
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Sealing Grommet: Elastomer, fluid resistant
and environmentally sealed
Metal Rails (CTJ2 and CTJ3): Aluminum
alloy, nickel plated (standard). Also available
with anodized, olive drab cadmium, or clear
finishes. Stainless steel clips
DCR Rails: Composite
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 5
DEUTSCH CTJ Series
Common Termination System
DEUTSCH CTD and CTJ1
Power Distribution and Feedback Modules
EASY TO USE
• Busses 6 to 20 contacts in
a small area
• Internal bus bars are configured
to allow connections of various
combinations of wires
RUGGED
• Uses a rugged A39029 socket
contact mated to one-piece
(cold-headed) internal pin bus bars
• Excellent vibration resistance
• Environmentally sealed
CONVENIENT
• Modules fit in single, multiple,
composite or metal rails with
multiple mounting options
• CTD distribution modules
accommodate different sizes of
contacts within the same bus
CTD power distribution and CTJ feedback modules for
rugged, environmentally sealed bussing of wires.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph
3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11):
5000 MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Vibration: Maintains continuity to minimize mechanical or
physical damage during or after vibration levels stated in
tested specifications
Corrosion: 48 hours of salt spray
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 6
DEUTSCH CTJ Series
Common Termination System
Contact Resistance (at 25°C)
Usable Wire Size
Grommet Sealing Range
Meets AS39029 paragraph 3.5.4
Wire
Size
Test
Current
Voltage
Drop
22 AWG
5A
73 mV
20 AWG
7.5 A
55 mV
16 AWG
13 A
50 mV
12 AWG
23 A
42 mV
Meets AS39029 paragraph 3.4.2
Wire OD
Contact
Size
Min.
Max.
22
0.030
0.060
20
0.040
0.083
16
0.065
0.109
Contact
Wire Range
(AWG)
Current
Rating
Size 22
26–22
5A
Size 20
24–20
7.5 A
Size 16
16–20
13 A
Size 12
14–12
23 A
CTD Series
Distribution Bussing Arrangements
Part No.
CTD126E01A
No. of Busses
Contacts per Bus
Distribution Bus
Bussing Arrangement
CTD126E02E
CTD1062E05A
1
1
2
5
2 Size 12
6 Size 16
—
2 Size 16
6 Size 20
—
1 Size 12
3 Size 16
—
1 Size 12
1 Size 20
1 Size 22
26
60
26
062
01A
01F
02E
05A
CTD Outline Dimensions
.510
CTD160E01F
1.020
.672
.672
1.047
.920
CTD16 Module
Size 16 Module
(CTD160E01F)
CTD12 and CTD10 Module
Size 12 Module
(CTD126E01A, CTD126E02E, CTD1062E05A)
Part Numbering System
CTD 1 60 E 01F - 513
Basic Identifier
Module Type
1 Feedback
Distribution Bus
(See Table)
Environmental
Bussing Arrangements
(See Table)
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 7
DEUTSCH CTJ Series
Common Termination System
CTJ1 Series
Feedback Bussing Arrangements
Size 22 Contacts
Quantity: 20
No. of Busses
Bus Code
1
2
5
6
10
4
01C
02D
05E
06B
10A
04F
Size 20 Contacts
Quantity: 12
No. of Busses
Bus Code
1
2
3
4
6
01B
02C
03D
04A
06E
Size 16 Contacts
Quantity: 6
No. of Busses
Bus Code
Size 12 Contacts
Quantity: 6
1
2
3
01D
02B
03A
CTJ1 Outline Dimensions
.510
No. of Busses
Bus Code
1.020
1
2
3
01E
02A
03B
.672
.672
1.047
.760
Size 22, 20, and 16 Modules
Size 22, 20, and 16 Modules
Part Numbering System
Size 12 Module
Size 12 Module
CTJ 1 22 E 05E - 513
Basic Identifier
Ordering Information
Module Type
Module
Part No.
1 Feedback
Size 22
CTJ122Exxx-yyy
Contact Size
Size 20
CTJ120Exxx-yyy
22, 20, 16, 12
Size 16
CTJ116Exxx-yyy
Environmental
Size 12
CTJ112Exxx-yyy
Bussing Arrangements
xxx = bussing arrangements
(See Table)
yyy = modification codes
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 8
DEUTSCH CTJ Series
Common Termination System
DEUTSCH CTJ4 Series
Electronic Component Modules
CONVENIENT
• May be placed near transient
suppression devices that they are
designed to protect
• Each module houses small printed
circuit boards incorporating a variety
of discrete electronic components
• Uses crimp-tool terminations and
a housing system for discrete
components and circuits
• Lightweight composite technology
for weight-saving solutions
ROBUST
• Fluid resistant in most military
or aerospace environments
• Input/output wiring is sealed with
elastomer grommet to help protect
against environmental hazards
• Designed to the electronic
requirements of MIL-T-81714/62
VERSATILE
• Available with a variety of discrete
electronic components with both
M81714/62 equivalents and additional
configurations
CTJ4 electronic component modules are designed to
the requirements of MIL-T-81714/62. Modules are available
with a variety of diodes, resistors, capacitors and fuses, with
both M81714/62 equivalents and additional configurations.
Specifications
Operating Temperature: -65°C to +200°C or IAW Electronic
Component (whichever has the lesser requirement)
Thermal Shock and Vibration: In accordance withAS81714 or
in accordance with electronic component (whichever has the
lesser requirement)
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 9
DEUTSCH CTJ Series
Common Termination System
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact
Wire Range (AWG)
Current Rating
Size 20
24–20
7.5 A
Size 12
14–12
23 A
Part Numbering System
CTJ4 20 E 017 - 513
Basic Identifier
Contact Size
20, 12
Environmental
Individual Circuits
Modifiers
513 Elastomer change to meet AS81714 Fluid Requirements
090 Less Contacts
6148 Elastomer change to meet AS81714 Fluid requirements, less sontacts, less sealing Plugs and
less Insertion/Removal Tools
4010 Vacuum Bake
Ordering Information
Contact
Part No.
Size 20
CTJ420E-xxx-yyy
Size 12
CTJ412E-xxx-yyy
xxx = individual electronic circuits
yyy = modification code
Outline Dimensions
1.170
MAX
.920
MAX
1.170
MAX
.510
.672
1.020
.672
1.020
.672
.672
CTJ4 Modules
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 10
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ412E001
CTJ420E002
CTJ420E003
CTJ420E004
CTJ420E005
CTJ420E006
CTJ420E008
CTJ420E009
CTJ420E010
CTJ420E011
CTJ420E012
CTJ420E013
CTJ420E014
CTJ420E015
CTJ420E016
One 15 A, 125 V Fuse
One VE08 Rectifier
Four JANTX 1N3613 Diodes
Five JANTX 1N5618 Diodes
Two RNC55H1002BP Diodes
Two 10 kΩ Resistors, 1/10 W
Five 150 Ω Resistors, 1/4 W
Five JANTX 1N4246 or
JANTX 1N5616 Diodes
Six JANTX 1N5618 Diodes
Five 10 kΩ Resistors, 1/10 W
Two JANTX 1N5618 Diodes
One 10 kΩ Resistor, 1/10 W
One 110 Ω Resistor, 1/10 W
Two 150 Ω Resistors, 1/4 W
One 10 F Capacitor, 35 WVDC
Three JANTX 1N6054A
Zener Diodes
Four JANTX 1N5618 Diodes
Four JANTX 1N4478 Zener Diodes
Four JANTX 1N5618 Diodes
One 200 Ω Resistor, 1/8 W
Five JANTX 1N5618 Diodes
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 11
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E017
CTJ420E019
CTJ420E020
CTJ420E021
CTJ420E022
CTJ420E026
CTJ420E027
CTJ420E028
CTJ420E029
CTJ420E034
CTJ420E035
CTJ420E036
CTJ420E037
CTJ420E038
CTJ420E039
One JANTX 1N5618 Diode
One JANTX 1N4478 Zener Diode
Three JANTX 1N5550 Diodes
Two 66099-108 or
66139-101 ISO Cubes
Five 150 Ω Resistors, 1/10 W
Five 23.2 kΩ Resistors, 1/20 W
One 1.10 kΩ Resistor, 1/10 W
One 1.40 kΩ Resistor, 1/10 W
One 20 kΩ Resistor, 1/10 W
Two 10 kΩ Resistors, 1/10 W
Six JANTX 1N5809 Diodes
Eight JANTX 1N5550 Diodes
Five 10.2 kΩ Resistors, 1/10 W
Five 24.9 kΩ Resistors, 1/20 W
Two 3.6 kΩ Resistors, 1/10 W
One 100 kΩ Resistor, 1/10 W
Two 1 F Capacitors, 50 WVDC
Five JANTX 1N5620 Diodes
Two 10 kΩ Resistors, 1/10 W
Two 1.43 kΩ Resistors, 1/10 W
One JANTX1N4954 Zener Diode
Five 2.8 kΩ Resistors, 1/10 W
Five 41.2 kΩ Resistors, 1/20 W
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 12
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E040
CTJ420E041
CTJ420E042
CTJ420E043
CTJ420E044
CTJ420E045
CTJ420E047
CTJ420E051
CTJ420E052
CTJ420E059
CTJ420E060
CTJ420E100
One JANTX 1N5618 Diode
Six JANTX 1N5618 Diodes
CTJ420E102
CTJ420E109
Five 49.9 kΩ Resistors, 1/20 W
Five JANTX 1N827 Zener Diodes
Three 60.4 or 59 Ω Resistors, 2 W
Four 150 Ω Resistors, 1/4 W
CTJ420E101
Six JANTX 1N3613 Diodes
Five JANTX 1N5550 Diodes
Five JANTX 1N5552 Diodes
Three JANTX 1N5618 Diodes
Two 20 kΩ Resistors, 1/4 W
Two 8.45 kΩ Resistors, 1/4 W
Five JANTX 1N5418 Diodes
Two 40 kΩ Resistors, 1/10 W
Two 50 kΩ Resistors, 1/10 W
Three JANTX 1N5618 Diodes
One MIL-T-27/172-45
Transformer
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 13
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E112
CTJ420E113
CTJ420E114
CTJ420E115
CTJ420E116
CTJ420E117
CTJ420E128
CTJ420E129
CTJ420E132
CTJ420E134
CTJ420E135
CTJ420E137
Four JANTX 1N5551 Diodes
Six JANTX 1N6419-1 Diodes
CTJ420E138
CTJ420E140
CTJ420E145
Five 150 Ω Resistors, 1/4 W
Five 6.2 kΩ Resistors, 1/4 W
Two JANTX 1N6052A
Zener Dioides
Three 150 Ω Resistors, 1/2 W
One 51 Ω Resistor, 1/2 W
One 820 Ω Resistor, 2 W
Five JANTX 1N5618 Diodes
Six 4.7 kΩ Resistors, 1/4 W
Five 3 kΩ Resistors, 1/4 W
One JANTX 1N5618 Diode
Three 10 kΩ Resistors, 1/8 W
Five 5.1 kΩ Resistors, 1/10 W
Five JANTX 1N4247 Diodes
Five 5 A Fuses, 125 V
Five 150 Ω Resistors, 1/2 W
Two 100 kΩ Resistors, 1/4 W
Two 7.5 kΩ Resistors, 1/4 W
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 14
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E146
CTJ420E149
CTJ420E155
CTJ420E157
CTJ420E161
CTJ420E162
CTJ420E163
CTJ420E164
CTJ420E166
Five JANTX 1N5618 Diodes
Two 120 Ω Resistors, 1/4 W
Two JANTX 1N6045A
Zener Diodes
Three JANTX 1N5616 Diodes
Two JANTX 1N4461 Zener Diodes
Two JANTX 1N6059A
Zener Diodes
One JANTX 2N2323A SCR
One 1.1 kΩ Resistor, 1/10 W
Two 1 kΩ Resistors, 1/4 W
Two JANTX 1N6067A
Zener Diodes
Two ON Semiconductor
MR756 Diodes
3
CTJ420E167
CTJ420E170
CTJ420E172
CTJ420E173
CTJ420E174
CTJ420E176
Five 1N5351B Zener Diodes
Five JANTX 1N5418 Diodes
Five 249 Ω Resistors, 1/4 W
Five 100 kΩ Resistors, 1/10 W
5
Two TELEDYNE M93F-1 ISO Cubes
Five 470 Ω Resistors, 1/2 W
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 15
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E177
CTJ420E184
CTJ420E186
CTJ420E187
CTJ420E189
CTJ420E191
CTJ420E192
CTJ420E196
CTJ420E197
CTJ420E301
CTJ420E302
CTJ420E303
CTJ420E304
CTJ420E305
CTJ420E311
Six JANTX 1N4454-1 Diodes
Five 7 A Fuses, 125 V
Five 1 kΩ Resistors, 1/4 W
Four 2.7 kΩ Resistors, 1/4 W
One 56 Ω Resistor, 1/2 W
Two 120 Ω Resistors, 1/2 W
Two 2.7 kΩ Resistors, 1/4 W
One 1 F Capacitor, 50 VDC
Two JANTX 1N5618 Diodes
Five 127 Ω Resistors, 1/8 W
Four 2.7 kΩ Resistors, 1/4 W
One 3.9 kΩ Resistor, 1/4 W
Two 2.7 kΩ Resistors, 1/4 W
Two 3.9 kΩ Resistors, 1/4 W
Two TELEDYNE M92F-3 ISO
Cubes
One INTERSIL HA-5002/883
Current Buffer
Five 5 A Fuses, 125 V
One 2.7 kΩ Resistor, 1/4 W
One 1.8 kΩ Resistor, 1/4 W
One 5.1 kΩ Resistor, 1/4 W
One 3.3 kΩ Resistor, 1/4 W
Three JANTX 1N5711 Diodes
Six JANTX 1N649-1 Diodes
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 16
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E313
CTJ420E314
CTJ420E316
CTJ420E317
CTJ420E320
Five 1N4007 Diodes
Three JANTX 1N5550 Diodes
CTJ420E321
CTJ420E322
CTJ420E326
CTJ420E332
CTJ420E333
Five 10 kΩ Resistor, 1/10 W
Two 2 kΩ Resistors, 1/4 W
Two JANTX 1N6677-1 Diodes
CTJ420E334
CTJ420E336
CTJ420E337
CTJ420E338
Five 100 kΩ Resistors, 1/4 W
Five 4.7 kΩ Resistors, 1/2 W
Two 200 A Diodes
Six 1N4007 Diodes
One 100 Ω Resistor, 1/4 W
One 300 Ω Resistor, 1/4 W
One 573 Ω Resistor, 1/4 W
One 10 F Capacitor, 35 WVDC
One 1 kΩ Resistor, 1/8 W
Three 10 kΩ Resistors, 1/8 W
One 300 kΩ Resistor, 1/8 W
Two 1 kΩ Resistors, 1/2 W
Two 1N4007 Diodes
Four JANS 1N5811 Diodes
CTJ420E330
One 1000 pF Capacitor, 100 VDC
Two 10 kΩ Resistors, 1/8 W
Two 3 kΩ Resistors, 1/8 W
Four JANTX 1N3613 Diodes
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 17
DEUTSCH CTJ Series
Common Termination System
CTJ4 Circuit Configurations
CTJ420E339
CTJ420E340
CTJ420E342
CTJ420E347
One 100 Ω Resistor, 1/2 W
Four JANTX 1N3613 Diodes
Four 1.5 kΩ Resistors, 1 W
Two 2.2 kΩ Resistors, 1/2 W
Two 240 kΩ Resistors, 1/2 W
CTJ420E341
Two 470 kΩ Resistors, 2 W
Twelve 4.99 kΩ Resistors, 1/8 W
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 18
DEUTSCH CTJ Series
Common Termination System
DEUTSCH CTJ5 Series
Board-Mount/Pluggable Modules
CONVENIENT
• Mounts on pc board or flat flex cable
• Uses AS39029 socket contacts to
accept wiring and connect through
to straight solder pin contacts
• Uses a standard insertion/
removal tool
• Light weight
RUGGED
• Fluid resistant in most
aerospace environments
• Available to operate in hydraulic
fluid immersion
EASY TO USE
• Straight solder pin contacts allow
modules to be soldered to pc boards
or plugged into specialized components
• All contacts are discrete, mainly
used to take single leads from a
PC board out to wire
Fast, cost-effective termination of pc boards, flat flex cable,
and electromechanical components.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11):
5000 MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Physical Shock: 78 g in each of the 3 mutually
perpendicular planes
Vibration: Maintains continuity to minimize mechanical
or physical damage during or after vibration following
vibration levels
Level 1—34 minutes per axis
20–90 Hz at 6 dB/oct. rise
90–300 Hz at 1.0 g2/Hz
300–2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20–40 Hz at 6 dB/oct. rise
40–350 Hz at 0.5 g2/Hz
350–2000 Hz at 6 dB/oct. fall
No discontinuities greater than 1 microsecond
Corrosion: 48 hours of salt spray
Magnetic Permeability: 2.0 max.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 19
DEUTSCH CTJ Series
Common Termination System
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and environmentally sealed
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Usable Wire Size
Grommet Sealing Range
Meets AS39029 paragraph 3.4.2
Wire
Size
Test
Current
Voltage
Drop
Contact
Wire Range
(AWG)
Current
Rating
22 AWG
5A
110 mV
Size 22
26–22
5A
20 AWG
7.5 A
83 mV
Size 20
24–20
7.5 A
16 AWG
13 A
74 mV
Size 16
16–20
13 A
Wire OD
Contact
Size
Min.
Max.
22
0.030
0.060
20
0.040
0.083
16
0.065
0.109
Modules
Size 22
Size
22
2020
Size
Size22
22 Contacts
Contacts
Size
Size20
20
12 Size
2020
Contacts
12 Size
Contacts
Size 16
Size
16
6 Size
6 Size16
16Contacts
Contacts
Pin Arrangements
OUTLINE
DIMENSIONS
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 20
DEUTSCH CTJ Series
Common Termination System
Outline Dimensions
.510
.672
.760 (Size 22)
.920 (Sizes 20, 16)
.187
.030
Locating Key
Part Numbering System
CTJ5 20 E 12 - 513
Basic Identifier
Contact Size
22, 20, 16
Environmental
Number of Contacts
Modification
513 To Mil Standard to Withstand Fluid Immersion to MS55
4010 Vacuum Bake
Ordering Information
Module
Part No.
Size 22
CTJ522E20-xxx
Size 20
CTJ520E12-xxx
Size 16
CTJ516E6-xxx
xxx = modification code.
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 21
DEUTSCH CTJ Series
Common Termination System
DEUTSCH CTJ6 and CTJ9 Series
Plug and Receptacle Connectors
SAVE SPACE AND WEIGHT
• Small, lightweight modules
• Flange mounting or in-line mounting
for simultaneous connect/disconnect
of many wires
VERSATILE
• Flange or in-line mountable
• Backpack configurations available
for receptacle connectors
• Available with optional strain relief
• PCB tail contacts or with crimp
backpack
RELIABLE
• Cork in bottle interfacial seal
between the mating halves
• Environmentally resistant
EASY MATING/UNMATING
• Audible click indicates proper mating
• Simple tool allows unmating
Small, lightweight modules designed for flange mounting
or in-line mounting for simultaneous connect/disconnect of
many wires.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 100,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11): 5000
MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Thermal Shock (AS81714 paragraph 3.5.5): After cycling
the modules between -55°C and +200°C, they will meet
all applicable electrical and mechanical requirements
Vibration: Maintains continuity to minimize mechanical
or physical damage during or after vibration following
vibration levels
Level 1—34 minutes per axis
20-90 Hz at 6 dB/oct. rise
90-300 Hz at 1.0 g2/Hz
300-2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20–40 Hz at 6 dB/oct. rise
40–350 Hz at 0.5 g2/Hz
350–2000 Hz at 6 dB/oct. fall
No discontinuities greater than 1 microsecond
Corrosion: No decrease in performance or exposure of
base metal up to 48 hours of salt spray
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 22
DEUTSCH CTJ Series
Common Termination System
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
Strain Relief: Brass, nickel plated
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact
Wire Range
(AWG)
Current Rating
Size 20
24–20
7.5 A
Size 12
14–12
23 A
Layout Arrangements
(Viewed from grommet side of plug module)
Layout 02
2 Size 12 Contacts
Layout 06
6 Size 20 Contacts
Layout 12
12 Size 20 Contacts
CTJ9 Receptacle Configurations
(Shown with rear environmental assembly)
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 23
DEUTSCH CTJ Series
Common Termination System
Part Numbering System
CTJ 6 20 E 02 N - 513
Basic Identifier
Module Type
6 Plug
9 Receptacle
Contact Size
20, 12
Connector Type
E Standard
R Rear Package (Receptacle Only)
Number of Contacts
02 2 Size 12
06 6 Size 20
12 12 Size 20
Keying
N
Standard
1, 2, 3 Alternate Keying (Consult Factory for Manufacturability)
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
4010 Vacuum Bake
1038 Supply with Strain Relief, Shipped Loose with Plug
5145 Offering for Plug Side Only That Provides a Strain Relief, Beryllium Copper Contacts and a
Single Color Band for Improved Probe Damage Resistance
CTJ9 Receptacle Outline and Mounting Demensions
Flange Mount Receptacle In-Line Receptacle
Order Part No. 65002*** for standard extended pins
Order Part No. 65003*** for rear environmental assembly
Layout
A
B
C
D
E
F
G
H
J
K
L
02
0.770
0.620
0.750
0.200
0.100
0.670
0.510
1.000
1.300
0.750
0.530
06
0.650
0.470
0.750
0.200
0.100
0.550
0.380
1.000
1.180
0.600
0.380
12
0.770
0.620
0.750
0.200
0.100
0.670
0.510
1.000
1.300
0.750
0.530
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 24
DEUTSCH CTJ Series
Common Termination
System
Layout
A
Plug
02
CTJ60.652
06
0.530
12
0.652
B
Part
No.
0.360
0.510
CTJ620E06
CTJ620E12
Outline
0.510
Dimensions
CTJ612E02
Layout
CLOCKING
OPTIONS
Layout
A
Options
B
Part
No.
Clocking
02
0.652
0.510
CTJ612E02
0.530
CTJ620E06
06
Grommet
Side
of
0.360
Plug
Receptacle
Side
12
0.652
0.510
CTJ620E12
Keying
Position
45°
Angle
Location
N
1,
2
1
CLOCKING
OPTIONS
3,
4
2
1,
3
3
2,
4
STRAIN
RELIEF
Strain
Relief
Grommet
Side
of
Plug
A
B
Part No.
02
0.652
0.510
CTJ612E02
06
0.530
0.360
CTJ620E06
12
0.652
0.510
CTJ620E12
Used with
Layout
A
06 Side
Receptacle
12
Keying Position
1, 2
1
3, 4
2
1, 3
3
2, 4
B
Part No.
0.320
0.490
1629-011-06117
0.470
0.630
1629-011-12117
Keying
Position
45°
Angle
Location
N
1,
2
1
3,
4
2
1,
3
3
2,
4
Used
with
L
A
B
Part
No.
STRAIN
Rayout
ELIEF
06
0.320
0.490
1629-‐011-‐06117
12
0.470
0.630
1629-‐011-‐12117
CTJ6/CTJ9 Mating Procedure
CTJ6/CTJ9
MATING
AND
UNMATING
PROCEDURE
45° Angle Location
N
CTJ6/CTJ9 Unmating Procedure
Mating
Procedure
34
|
P a g e
Used
with
Layout
A
B
Part
No.
06
0.320
0.490
1629-‐011-‐06117
Step
2. Press the
plug and
12
Step 1. With the plug’s
0.470
0.630
1629-‐011-‐12117
engaging surface facing
receptacle firmly together
the receptacle’s mating
until you hear an audible
CTJ6/CTJ9
ATING
AND
UNMATING
PROCEDURE
face andM
the
angled
keying
click
that indicates the plug
surfaces aligned, insert the
is fully seated and locked
Mating
Procedure
plug into
the receptacle.
in position.
Step 1. Place extraction
tool CTJ-R06 over the plug
module and insert it into
the slots on both sides of
the receptacle. Push the
tool in until the module’s
locking fingers disengage.
Step 2. Pressing the legs of
the tool to hold the module
tight, pull back to remove
the plug module.
34
|
P a g e
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 25
DEUTSCH CTJ Series
Common Termination System
DEUTSCH CTJ7 and CTG Series
Grounding Modules and Junctions
CONVENIENT
• Small rugged devices
• Environmentally sealed
• Simple assembly
FLEXIBLE
• Stud and flange mounting
• Threaded stud can replace the
screw terminals
RUGGED ONE-PIECE
CONSTRUCTION
• Resistant to shock and vibration
• Light weight
• Dissipates heat well
CTJ7 grounding modules for multiwire grounding
applications that need a small, rugged device that also
offers sealing and assembly ease.
CTG grounding junctions provide a simple method of
terminating a wire to ground. Wires with crimp type
contacts inserted into the grounding junctions can then
be attached to any grounding surface. Junctions are
available for size 22, 20, 16, and 12 contacts.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph
3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11): 5000
MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Physical Shock: 78 g in each of the 3 mutually
perpendicular planes
Thermal Shock (AS81714 paragraph 3.5.5): After cycling
the module between -55°C and +200°C, it will meet all
applicable electrical and mechanical requirements
Vibration: Maintains continuity to minimize mechanical
or physical damage during or after vibration following
vibration levels
Level 1—34 minutes per axis
20-90 Hz at 6 dB/oct. rise
90-300 Hz at 1.0 g2/Hz
300-2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20-40 Hz at 6 dB/oct. rise
40-350 Hz at 0.5 g2/Hz
350-2000 Hz at 6 dB/oct. fall
No discontinuities greater than 1 microsecond
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 26
DEUTSCH CTJ Series
Common Termination System
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant
and environmentally sealed
Corrosion: 48 hours of salt spray
Magnetic Permeability: 2.0 max.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Usable Wire Size
Grommet Sealing Range
Meets AS39029 paragraph 3.4.2
Wire
Size
Test
Current
Voltage
Drop
Contact
Wire Range
(AWG)
Current
Rating
22 AWG
5A
73 mV
Size 22
26–22
5A
20 AWG
7.5 A
55 mV
Size 20
24–20
7.5 A
16 AWG
13 A
50 mV
Size 16
16–20
13 A
12 AWG
23 A
42 mV
Size 12
14–12
23 A
Wire OD
Contact
Size
Min.
Max.
22
0.030
0.060
20
0.040
0.083
16
0.065
0.109
12
0.097
0.142
CTJ7 Modules
Size
22
Size
Size
Size
2
2
22
2
2
Size
Size
Size
2Size
0
22
0
0
20
01C
Bussing
Code
01B
Bussing
Code
01C
01C
01C
Bussing
BB
ussing
ussing
Code
CC
ode
ode
01B
01B
01B
Bussing
BB
ussing
ussing
Code
CC
ode
ode
20 Size 22 Contacts
12 Size 20 Contacts
20
20
S20
ize
Size
Size
22
2C
2
2
ontacts
2
CC
ontacts
ontacts
12
12
S12
ize
Size
Size
20
2C
2
0
ontacts
0
CC
ontacts
ontacts
CTJ7 Module Outline Dimensions
CTJ7
CTJ7
CTJ7
MODULE
MM
ODULE
ODULE
OUTLINE
OO
UTLINE
UTLINE
DIMENSIONS
DD
IMENSIONS
IMENSIONS
Size
Size
Size
1Size
6
11
6
6
16
01D
Bussing
Code
01D
01D
01D
Bussing
BB
ussing
ussing
Code
CC
ode
ode
6 Size 16 Contacts
6
S6
ize
6
Size
Size
16
1C
1
6
ontacts
6
CC
ontacts
ontacts
Size
Size
Size
Size
12
11
2
2
12
01E
Bussing
01E
01E
01E
Bussing
BB
ussing
ussing
CCode
ode
CC
ode
ode
6 Size 12 Contacts
6
S6
ize
6
Size
Size
12
1C
1
2
ontacts
2
CC
ontacts
ontacts
Type
Type
Type
K:Flange
KK:Flange
:Flange
MM
ount
Mount
ount
Type K: Flange Mount
Type
Type
Type
E:
ESE
:
tud
S:
tud
Stud
Mount
MM
ount
ount
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 27
DEUTSCH CTJ Series
Common Termination System
Type E: Stud Mount
Part Numbering System
CTJ7 22 K 01C - 513
Basic Identifier
Module Size
22 Size 22 Contact
20 Size 20 Contacts
16 Size 16 Contacts
12 Size 12 Contacts
Flange Mounting Style
K Flange Mount
E Stud Mount (Not available for size 12)
Bus Arrangement
01C 20 Size 22 Contacts Bussed
01B 12 Size 20 Contacts Bussed
01D 6 Size 16 Contacts Bussed
01E 6 Size 12 Contacts Bussed
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6144 Replace Standard Hardware with MS21042l3 Self-Locking Nut and MS55 Resilient Material;
Replace Standard Contacts with High-Reliability Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
7067 Gold-Over-Nickel Plating, MVFS Insert Material, Add Washer, Rotate Insert Marking
4010 Vacuum Bake
CTG Junction Outline Dimensions
Contacts
Size
A
B
Part No.
22
1.316
(33.43)
0.188
(4.78)
CTG-22-08
20
1.240
(31.50)
0.188
(4.78)
CTG-20-08
16
1.246
(31.65)
0.250
(6.35)
CTG-16-08
12
1.370
(34.80)
0.313
(7.95)
CTG-12-08
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 28
DEUTSCH CTJ Series
Common Termination System
DEUTSCH CTL, CTM, and CTN Series
In-Line Junctions
VERSATILE
• Options to connect up to 4 wires
in-line and bussed configurations
• Houses and seals individual
components
• Replacement for “Y’ splices and
terminal strips
• Special configurations and
designs available
RUGGED
• Resistant to shock and vibration,
per Mil AS39029, paragraph 3.5.9
• Extreme temperature range: -55°C
to +200°C
• Resistant to harsh fluids, per Mil
AS-81714
EASY TO USE
• In-line mountable
• Uses AS39029 crimp contacts
CTL series in-line junctions connect two wires in-line
using crimp-type contacts. The junctions can then be
placed in a wire bundle without being mounted.
CTM series multi-junctions connect and bus four wires.
They can be used to replace “Y” splices and terminal strips.
CTN Series electronic multi-junctions are in-line
devices that houses and shields passive or active
components, including fuses, resistors, diodes, capacitors,
or integrated circuits.
Dielectric Withstanding Voltage (AS81714):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Operating Temperature: -55°C to +200°C
Physical Shock (AS39029, paragraph 3.5.9): Items shall
not be damaged, there shall be no loosening of parts
due to shock, and no interruption of electrical continuity
longer than one microsecond during exposure to
mechanical shock.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 29
DEUTSCH CTJ Series
Common Termination System
Usable Wire Size
Grommet Sealing Range
Meets AS39029 paragraph 3.4.2
Contact
Wire Range
(AWG)
Current Rating
Size 22
26–22
5A
Size 20
24–20
7.5 A
Size 16
16–20
13 A
Size 12
14–12
23 A
Wire OD
Contact Size
Min.
Max.
22
0.030
0.060
20
0.040
0.083
16
0.065
0.109
CTL Outline Dimensions
Part No.
Size
A Max.
B .030
CTL-22
22
1.280
0.200
CTL-20
20
1.452
0.260
CTL-16
16
1.400
0.300
CTL-12
12
1.680
0.360
Part Numbering System
CTL - 22 - 513
Basic Identifier
Contact Size
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
CTM Outline Dimensions
Part No.
Size
A 6 .060
B 6 .030
C 6 .030
CTM 22
22
1.262
0.354
0.210
CTM 20
20
1.368
0.451
0.241
CTM 16
16
1.368
0.518
0.274
CTM 12
12
1.644
0.644
0.337
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 30
DEUTSCH CTJ Series
Common Termination System
Part Numbering System
CTM - 22 - 513
Basic Identifier
Contact Size
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
4010 Vacuum Bake
CTN Layout Arrangements
CTN Outline Dimensions
Part Numbering System
CTN 20 D XXX - 513
Basic Identifier
Contact Size
Electronic Base Component
D Diode
C Capacitor
I Integrated Circuit
R Resistor
F Fuse
Numerical Sequence
Consult TE for component availability
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
AEROSPACE, DEFENSE & MARINE / DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
PAGE 31
DEUTSCH CTJ Series
Common Termination System
DEUTSCH Composite In-line Junctions
RUGGED
• Rugged composite housing
• Fluid resistant: hydraulic fluid,
jet fuel, and other fluids common in
aerospace and defense applications
• Environmentally sealed
• No exposed discrete components
EASY TO USE
• Reliable and quick termination
• No mounting required
• Light weight
CONVENIENT
• Field serviceable AS39029
socket contacts
• Accommodates a wide range of
common gauge wire, from 22 to
12 AWG
• Hand crimp socket contacts
VERSATILE
• Design options for discrete
components available
Designed to AS81714 requirements, DEUTSCH in-line
termination junctions are composite versions of the CTL,
CTM, and CTN series.
Dielectric Withstanding Voltage (AS81714 paragraph
3.5.6):
At Sea Level: 1500 VACrms
At 100,000 Ft: 200 VACrms
Operating Temperature: -65°C to +200°C
Insulation Resistance (AS81714 paragraph 3.5.11): 5000
MΩ min. at 25°C
Electrical Continuity:
Shock Exposure: