CV-1983-110V-2260W-UK

CV-1981/CV1983 Series Thermogun RoHS 2 TECHNICAL FILE CONTENT •This technical file contains following sections : 1. PRODUCT IDENTIFICATION • description • picture (optional) • list of components • list of suppliers • applicable EEE category • applicable exemptions 2. RISK ASSESSMENT • approach • material risk • supplier risk • part incompliance risk index (PIR-index) • required level of technical documentation 3. EVALUATION OF DOCUMENTATION • principle • evaluation criteria 4. REFERENCES 5. OVERVIEW TABLE PRODUCT IDENTIFICATION DESCRIPTION PICTURE (optional) product group Hot air Gun CV-1983-120V-2700W-UK CV-1983-220V-2260W CV-1983-220V-2260W-UK CV-1983-220V-3060W CV-1983-220V-3060W-UK Triac "S"/Triac "S" PID CV-1981-110V-1460W-400HZ CV-1981-120V1600W-CANMK2 CV-1981-120V1600W-UKMK2 Gun UK Version CV-1981-230V1600WMK2 Gun Europe Version CV-1981-230V1600W-SEVMK2 Gun Swiss Version CV-1981-230V1600W-UKMK2 Gun UK Version CV-1981-42V-1000W-NPMK2 : : GPL 729 : - EG2024-000 773898-000 985426-000 538361-000 231866-000 461365-000 A42716-000 E95798-000 : 813914-000 F25836-000 340970-000 F67999-000 CV-1981-230V1600W-UKPIDF 958770-000. 385828-000 CV-1981-120V-1600W-UKPID 928826-000 serial number N/A New Tools Oct 2014 and onwards New Tools Oct 2014 and onwards CV1983-ST-230V3400W-EU CV1983-ST-230V2300W-EU CV1983-ST-120V2400W-CEE CV1983-ST-230V3400W-CEE CV1981-ATPID-230V1600W-EU CV1981-ATPID-230V1600W-UK CV1981-ATPID-120V1600W-US CV1981-ATPID120V1600W-CEE CV1981-ST-230V1600W-EU CV1981-ST-230V1600W-CH CV1981-ST-230V1600W-UK CV1981-ST-120V1600W-US CV1981-ST-120V1600W-UK EG0998-000 EG1100-000 EG1102-000 EG1104-000 EG1106-000 EG1108-000 EG1110-000 EG1112-000 EG1114-000 EG1115-000 EG1116-000 EG1118-000 EG1120-000 CV-1981-230V1600WPID Spares for CV- MK -PID –CV- M CV-1983-M2-230V-2200W-ELE CV-1983-M2-230V-3060W-ELE CV-1983-M2-230V-2200W-ELE CV-1983-M2-230V-3060W-ELE 179178-000 091282-000 D40442-000 123906-000 LIST OF COMPONENTS All components are listed in the overview table. LIST OF SUPPLIERS All suppliers are listed in the overview table. APPLICABLE EEE CATEGORY 6.electrical and electronic tools Evaluation document APPLICABLE EXEMPTIONS (if any) None `` RISK ASSESSMENT GENERAL APPROACH • TE Connectivity considers following levels of technical documentation, ranked by effectiveness : 1. internal or third party test reports 2. full material declarations (FMD) 3. part specific statements of compliance (SoC) 4. generic statements of compliance 5. generic contractual agreements not used by TE not used by TE • TE Connectivity is never relying on generic contractual agreements or generic statements of compliance to fulfill technical documentation requirements. • The necessity of a detailed risk assessment will be based on the availability of test data : - if TE already has test data available : no need for a detailed risk assessment; the test data, being the highest possible level of documentation, will be used by default. - if TE has no test data availabe : a detailed risk assessment, as described below, will determine the required technical documentation. DETAILED RISK ASSESSMENT METHODOLOGY • MATERIAL RISK + SUPPLIER RISK  PART INCOMPLIANCE RISK  REQUIRED TECHNICAL DOCUMENTATION • The different building blocks of this methodology are explained below. RISK ASSESSMENT (continued) MATERIAL RISK • Following TE's corporate compliance validation specification TEC-138-703 or Business Unit specific compliance specifications, TE Business Units evaluate their material risk. • Although assessment procedures and scoring systems may differ between BU's, in the end all scores are to be transferred to a low - medium - high material risk evaluation. • This material risk evaluation for every part is documented in the overview table. SUPPLIER RISK • Following TE's corporate compliance validation specification TEC-138-703 or Business Unit specific quality, supplier auditing or compliance specifications, TE Business Units assess their supply chain and evaluate their suppliers. • Although assessment procedures and scoring systems may differ between BU's, in the end all scores are to be transferred to a low - medium - high supplier compliance risk evaluation. • This supplier compliance risk evaluation for every supplier is documented in the overview table. RISK ASSESSMENT (continued) PART INCOMPLIANCE RISK index (PIR-index) • The PIR-index combines the material risk evaluation and the supplier risk evaluation into an overall low-medium-high part incompliance risk ranking. • The material risk is the main driving factor for the PIR-index, with a beneficial influence for thrustworthy suppliers. SUPPLIER COMPLIANCE RISK EVALUATION PIR-index MATERIAL RISK EVALUATION LOW MEDIUM HIGH LOW  LOW LOW LOW MEDIUM  LOW MEDIUM MEDIUM HIGH  LOW MEDIUM HIGH • The PIR-index for every part/supplier-combination is documented in the overview table. RISK ASSESSMENT (continued) REQUIRED LEVEL OF TECHNICAL DOCUMENTATION • Different levels of technical documentation, ranked by effectiveness, are : 1. internal or third party test reports 2. full material declarations (FMD) 3. part specific statements of compliance (SoC) 4. generic statements of compliance 5. generic contractual agreements not used by TE not used by TE • TE Connectivity is never relying on generic contractual agreements or generic statements of compliance. • The PIR-index (material risk X supplier risk) determines the required level of technical documents for documenting the part's compliance with the RoHS substance restrictions. required MINIMUM level of technical documentation MATERIAL RISK LOW SUPPLIER RISK MEDIUM HIGH LOW  supplier SoC supplier SoC supplier SoC MEDIUM  supplier SoC supplier FMD or supplier test report supplier FMD or supplier test report HIGH  supplier SoC supplier FMD or supplier test report internal or 3rd party test report • The required technical documentation for every part is documented in the overview table. EVALUATION OF DOCUMENTATION PRINCIPLE • All technical documentation needs to be evaluated wether the document is of sufficient quality to be included and can be used to confirm that the component meets the substance restrictions of RoHS2. • The evaluation is documented in the overview table. EVALUATION CRITERIA • Following is a non-exhaustive list of criteria to take into account for the evaluation of supplier anwers/test reports : - clear identification of supplier or test lab / letterhead - date of answer/test report - location of test lab and name of tester - analytical test method used for the test - applicable legislation stated - clear product identification - ISO 17025 certification of test lab - contact for further information - no unacceptable waiver statements - description of the conclusion of the testing / confirmation that all results actually meet substance restrictions limits - signature Leister Documentation of compliance. Leister manufacture's /supplies TE heat gun products and components referenced in the documentation. C.E. Conformity Directives: 2006/42, 2004/108, 2006/95 Harmonized Standards: EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1, EN 55014-1, EN 55014-2, EN 50366, EN 62233, EN 61000-3-2, EN 61000-3-3, EN 60335-2-45 Signed off by Leister. Adobe Acrobat Document EC declaration of conformity (in terms of the EC machinery directive 2006/42; Designation Hot Air Tool Type Electron Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 EN 60335-2-45:2002 + A1:2008 EN 50581:2012 Adobe Acrobat Document Adobe Acrobat Document Adobe Acrobat Document Designation Hot Air Tool Type Triac ST Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-6-2:2005 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 EN 60335-2-45:2002 + A1:2008 Designation Hot Air Tool Type Triac AT Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 + A2:2011 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-6-2:2005 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2012 EN 60335-2-45:2002 + A1:2008 + A2:2012 EN 50581:2012 Designation Hot Air Tool Type Triac S, Triac PID Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-6-2:2005 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 EN 60335-2-45:2002 + A1:2008 EN 50581:2012 REFERENCES EU documents • Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment • EN 50581 (2012) : Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances TE Connectivity corporate compliance documents • TEC-138-703 : Product Compliance Validation Specification TEST RESULTS AVAILABLE ? IDENTIFICATION MATERIALS SUPPLIERS TE part number part description supplier name Leister yes = no RA(*) no = RA needed RISK ASSESSMENT (RA) material supplier risk risk CONCLUSION PIR-index EVALUATION OF DOCUMENTATION quality check OK ? required technical document yes/no CV-1983-120V-2700W-UK CV-1983-220V-2260W CV-1983-220V-2260W-UK CV-1983-220V-3060W CV-1983-220V-3060W-UK EG4024-000 773898-000 985426-000 538361-000 231866-000 NO NO NO NO NO NO HIGH HIGH HIGH HIGH HIGH HIGH LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD Spares:CV 1983 229277-000 D40442-000 123906-000 CV-1983-230V-CNTRL-CRCT CV-1983-M2-230V-2200W-ELE CV-1983-M2-230V-3060W-ELE NO NO NO HIGH HIGH HIGH LOW LOW LOW LOW LOW LOW supplier FMD supplier FMD supplier FMD 461365-000 A42716-000 NO NO NO NO NO NO NO NO HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD YES YES YES YES YES YES YES YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO NO NO NO NO NO NO NO NO NO NO NO NO NO HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH HIGH LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD YES YES YES YES YES YES YES YES YES YES YES YES YES YES CV 1981-Triac TYPE "S" and PID CV-1981-110V-1460W-400HZ CV-1981-120V1600W-CANMK2 CV-1981-120V1600W-UKMK2 Gun UK Version CV-1981-230V1600WMK2 Gun Europe Version E95798-000 CV-1981-42V-1000W-NPMK2 813914-000 F25836-000 340970-000 F67999-000 CV-1981-230V1600WPID CV-1981-230V1600W-UKPIDF CV-1981-120V-1600W-UKPID 958770-000. 385828-000 928826-000 Spares:CV-1981-TRIAC"S" CV-1981-S-CIRBD-120V CV-1981-S-ELEM-42V CV-1981-S-HANDLE CV-1981-S-PHOTO-DIOD 134016-000 161876-000 583328-000 070592-000 CV-1981-230V1600W-SEVMK2 Gun Swiss Version CV-1981-230V1600W-UKMK2 Gun UK Version Spares for CV-1981 PID/Used on Triac "S". CV-1981-PID-CIRBD-02-R CV-1981-PID-CIRBD-120V CV-1981-PID-CIRBD-230V CV-1981-PID-ELEM-120V CV-1981-PID-ELEM-230V CV-1981-PID-PHOTO-DIOD CV-1981-PID-S-BHOLDER CV-1981-PID-S-BRSH230V 877344-000 001954-000 876490-000 179178-000 091282-000 111766-000 237656-000 827444-000 YES YES YES YES YES YES CV-1981-PID-S-BRSH42V120V CV-1981-PID-S-FAN CV-1981-PID-S-MOTOR-120V CV-1981-PID-S-MOTOR-230V CV-1981-PID-S-STAND CV-1981-PID-S-TEMP-LIM-SW CV-1981-PID-S-TRIAC 848298-000 142620-000 665184-000 680986-000 767328-000 063152-000 037444-000 NO NO NO NO NO NO NO HIGH HIGH HIGH HIGH HIGH HIGH HIGH LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW LOW supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD supplier FMD YES YES YES YES YES YES YES CV1983-ST-230V3400W-EU CV1983-ST-230V2300W-EU CV1983-ST-120V2400W-CEE CV1983-ST-230V3400W-CEE CV1981-ATPID-230V1600W-EU CV1981-ATPID-230V1600W-UK CV1981-ATPID-120V1600W-US CV1981-ATPID120V1600W-CEE CV1981-ST-230V1600W-EU CV1981-ST-230V1600W-CH CV1981-ST-230V1600W-UK CV1981-ST-120V1600W-US CV1981-ST-120V1600W-UK EG0998-000 EG1100-000 EG1102-000 EG1104-000 EG1106-000 EG1108-000 EG1110-000 EG1112-000 EG1114-000 EG1115-000 EG1116-000 EG1118-000 EG1120-000 NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES CV-1983-M2-230V-2200W-ELE CV-1983-M2-230V-3060W-ELE CV-1983-M2-230V-2200W-ELE CV-1983-M2-230V-3060W-ELE 179178-000 091282-000 D40442-000 123906-000 NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES NO HIGH LOW LOW supplier FMD YES CV-1981-PID-Triac "S" CV-1981-Triac "S" Spares for CV- MK -PID –CV- CV1981PIDExpView.GIF Triac AT Adobe Acrobat Document Traic ST Adobe Acrobat Document Electron Adobe Acrobat Document M CV1981 triac S.gif (C Leister Documentation of compliance. Leister manufacture's /supplies TE heat gun products and components referenced in the documentation. C.E. Conformity Directives: 2006/42, 2004/108, 2006/95 Harmonized Standards: EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1, EN 55014-1, EN 55014-2, EN 50366, EN 62233, EN 61000-3-2, EN 61000-3-3, EN 60335-2-45 Signed off by Leister. EC declaration of conformity (in terms of the EC machinery directive 2006/42; Designation Hot Air Tool Type Electron Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 EN 60335-2-45:2002 + A1:2008 EN 50581:2012 Designation Hot Air Tool Type Triac ST Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-6-2:2005 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 EN 60335-2-45:2002 + A1:2008 Adobe Acrobat Document Designation Hot Air Tool Type Triac AT Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 + A2:2011 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-6-2:2005 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2012 EN 60335-2-45:2002 + A1:2008 + A2:2012 EN 50581:2012 Designation Hot Air Tool Type Triac S, Triac PID Option EC directive(s) 2006/42/EC (Machinery Directive) 2004/108/EC (EMC Directive) 2006/95/EC (Low Voltage Directive) 2011/65/EU (RoHS Directive); no excemptions applied Harmonised standards EN 12100:2010 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-6-2:2005 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 62233:2008 EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008 EN 60335-2-45:2002 + A1:2008 EN 50581:2012