CW5504-000

Thermocouple Extension Cables SHF-260 Highly Flexible Wire Product Facts 260˚C rated (10K hours); 290˚C rated (500 hours) ■ Handles down to a 6X bend radius ■ All extruded fluoropolymer based insulation system ■ Outstanding chemical and fluid resistance when tested to SAE-AS-22759/41 ■ Corona resistant when tested to ASTM D1868 ■ Arc track resistant to the current SAE-AS-22759 specification ■ Currently available from 2/0-12 AWG sizes ■ Meets FAR Part 25 Flammability ■ Its ability to route in tight spaces may allow the user to go “up” in AWG sizes and eliminate the need to split power, where routing and bending previously prevented the user from doing so. Applications Typical uses include both primary and secondary power distribution applications where high amperage is needed Materials Fluoropolymer based material Standards & Specifications TE Specification WCD3111 Ordering Information Contact TE Thermal Properties Fire Hazard Properties Temperature Rating: -65˚C to +260˚C Flammability - 60˚ Flame: Exceeds test requirements Life Cycle: 290˚C for 500 hours Smoke: Smoke resistance test specified in ASS22759 using an oven temperature of 290˚C Cold Bend: -65˚C for 4 hours Thermal Shock Resistance: Accordance with ASS22759 using an oven temperature of 260˚C Electrical Properties Voltage: 600V - 2000V 9 Insulation Resistance: Minimum 50,000 Mohms/kft Physical Properties Weight and Dimensions: See TE Specification Control Drawings Wire Printing Wire and Cable TE is pleased to announce the introduction of its new SHF-260 highly flexible wire. The need for a combination of high temperature and high performance in wire insulation has become a critical factor in today’s platforms. This is especially true in large diameter power feeder applications where temperature and durability are key. Its highly flexible characteristic allows the cable to be bent and routed in extremely tight areas with no wrinkling or cracking of the insulation.This results in being able to run shorter distances, reducing the stresson the contact, and reducing the mating and demating forces normally associated with large shell diameter circular connectors - such as MILC-5015 and MIL-C-83723 connectors. UV Laser Marking: Excellent mark contrast Insulation Elongation: 150% elongation minimum Tensile Strength: 2000 lbf/inch2 minimum Minimum Bend Radius: 290˚C for 500 hours around a mandrel having a diameter as specified in the applicable specification sheet Wrap Test: Accordance with ASS22759 using an oven temperature of 290˚ 9-81 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015