CWT-3803

SPECIFICATION CONTROL DRAWING Product Revisions Product Dimensions Cable Dimensions Product L A B C D Name max min max min min CWT-3801 D 26 (1.025) 1.7 (0.065) 1.7 (0.065) 0.9 (0.035) 0.4 (0.015) CWT-3802 C 26 (1.025) 1.95 (0.075) 1.95 (0.075) 1.1 (0.045) 0.6 (0.025) CWT-3803 B 42.0 (1.655) 2.7 (0.105) 2.7 (0.105) 1.8 (0.070) 1.3 (0.050) CWT-3805 A 42.0 (1.655) 4.5 (0.180) 4.5 (0.180) 2.3 (0.090) 1.8 (0.070) CWT-3806 B 42.0 (1.655) 6.0 (0.235) 6.0 (0.235) 3.3 (0.130) 2.8 (0.110) CWT-3807 A 42.0 (1.655) 7.0 (0.275) 7.0 (0.275) 3.7 (0.145) 3.2 (0.125) CWT-3809 C 42.0 (1.655) 8.7 (0.340) 8.7 (0.340) 4.2 (0.165) 3.7 (0.145) CWT-3810 A 42.0 (1.655) 9.7 (0.382) 9.7 (0.382) 6.8 (0.268) 6.0 (0.236) CWT-3811 C 42.0 (1.655) 10.7 (0.420) 10.7 (0.420) 7.1 (0.280) 6.6 (0.260) CWT-3813 B 42.0 (1.655) 13.0 (0.510) 13.0 (0.510) 8.9 (0.350) 8.4 (0.330) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Transparent clear. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE CD18 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 3. MELTABLE RING: Thermally stabilized thermoplastic. Color: clear. 4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin plated copper shield on a cable, having an insulation rated for at least +85°C minimum. 2. Temperature range: -55°C to +125°C. 3. For installation procedure and application equipment consult RPIP-824-00 or H54286. For best results, prepare the cable as shown: TITLE : Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco reserves the right to amend this drawing ANGLES: N/A TOLERANCES: at any time. Users should evaluate the 0.00 N/A suitability of the product for their application. ROUGHNESS IN 0.0 N/A MICRON 0 N/A DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 D981198 D000675 If this document is printed it becomes uncontrolled. Check for the latest revision. SOLDERSLEEVE ONE STEP SHIELD TERMINATOR DOCUMENT NO.: CWT-38XX DATE: DOC ISSUE: 10 27-Nov.-00 PROD. REV.: SEE TABLE SCALE: None SIZE: SHEET: A 1 of 1