D-101-31

CUSTOMER DRAWING Product Name D-101-31 L max 17.25 (0.680) Product Dimensions øA øB min min 4.55 5.00 (0.180) (0.200) Cable Dimensions øE øG min max 2.5 4.55 (0.100) (0.180) øD max 5.00 (0.200) J0.5 (J0.02) 7 (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE RING: Thermally stabilized thermoplastic. Color: gray. 4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue. APPLICATION 1. This part is designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed, having nickel plated copper shields. 2. Install using TE approved convection or infrared tools in accordance with TE assembly procedure RCPS-100-70. 3. Assemblies will meet requirements of TE specification RT-1404 and National Aerospace Standard NAS-1747. 4. Temperature range: -55C to +150C. For best results, prepare the cable as shown: TITLE: SOLDERSLEEVE SHIELD TERMINATOR Unless otherwise specified dimensions are in millimeters.[Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem Devices Tyco Electronics Corporation reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. ECO NUMBER: DOCUMENT NO.: D-101-31 REV: DATE: C SCALE: YNGUYEN 06090 ECO-11-011935 © 2009-2011 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. June 9, 2011 SIZE: NTS A SHEET: 1 of 1