D-105-00

SPECIFICATION CONTROL DRAWING 4 Product Revision Product Name D-105-00 R L max 29.75 (1.170) Product Dimensions øA øB min min 13.35 13.84 (0.525) (0.545) Cable Dimensions øE øG min max 8.9 13.35 (0.350) (0.525) øD max 13.6 (0.535) J±1.3 (J±0.05) 9.4 (0.370) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: clear. APPLICATION 1. This part is designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the 40 `dimensional criteria listed, having tin or silver plated copper shields. 2. Install using Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70. 3. Assemblies will meet requirements of Raychem Specification RT-1404 and National Aerospace Standard NAS-1747. 2. Temperature range: -55°C to +150°C. For best results, prepare the cable as shown: 300 Constitution Drive Menlo Park, CA 94025 Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE : SolderSleeve Shield Terminator .: D-105-00 DOCUMENT NO DCR NUMBER: REPLACES: D010041 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 18-Jan-01 SEE TABLE 3 If this document is printed it becomes uncontrolled. Check with the web for the latest revision SCALE: None D981828 SIZE: A SHEET: 1 of 1