D-110-35CS1290

SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. Maximum Recovered I.D. - 0.76 (0.030) 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. WEIGHT: 13 mg. min. APPLICATION 1. This part is designed for splicing tin or silverplated solid conductors having a combined diameter between 0.51 (0.020) and 1.78 (0.070) when twisted together. 2. Parts may be installed with convection or infrared heat sources. 3. Wires are to be stripped 17.15 - 19.69 (0.675 - 0.775) and twisted together. Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA RAYCHEM UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco reserves the right to amend this drawing at ANGLES: N/A TOLERANCES: any time. Users should evaluate the suitability of 0.00 N/A the product for their application. ROUGHNESS IN 0.0 N/A MICRON 0 N/A DRAWN BY: REPLACES: DCR NUMBER: M. FORONDA N/A D000143 If this document is printed it becomes uncontrolled. Check for the latest revision. SOLDERSLEEVE CONDUCTOR SPLICING 1.78 (0.070) I.D. DOCUMENT NO.: D-110-35 TITLE: DATE: DOC ISSUE: 1 22-Mar-00 PROD. REV.: J SCALE: None SIZE: A SHEET: 1 of 1