D-146-0207

SPECIFICATION CONTROL DRAWING Product Revision Product Name D-146-0206 D D-146-0207 D D-146-0208 D Product Dimensions øA øB min min 2.80 3.20 (0.106) (0.125) 4.60 5.10 (0.181) (0.200) 7.10 7.60 (0.280) (0.300) L ±0.8 (0.031) 15.00 (0.591) 15.00 (0.591) 15.00 (0.591) K min 150 (5.910) 150 (5.910) 150 (5.910) øD max 2.80 (0.106) 4.60 (0.181) 7.10 (0.280) Cable Dimensions øE J ±0.5 min (J ±0.02) 0.90 7.00 (0.035) (0.275) 1.80 7.00 (0.070) (0.275) 3.60 7.00 (0.142) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue. 4. GROUND LEAD: Raychem 55A0811-22 in accordance with MIL-W-22759/34 AWG 22 stranded tin plated copper. Marked: SHLD JMPR22. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the dimensional criteria listed, having tin or silver plated copper shields. 2. Temperature range: -55°C to +150°C. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD DOCUMENT NO.: D-146-020X DCR NUMBER: REPLACES: D981998 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 11/24/98 SEE TABLE 2 If this document is printed it becomes uncontrolled. Check for the latest revision SCALE: None D980570 SIZE: A SHEET: 1 of 1