D-150-0174CS2902

CUSTOMER DRAWING Part Names Primary No. AWG Range Color Code L Max Product Dimensions øD1 A2.54 (0.100) Min 50.30 (1.970) 3.00 (0.118) 50.30 (1.970) 4.00 (0.157) 50.30 (1.970) 5.00 (0.197) 74.93 (2.950) 9.04 (0.356) 74.93 (2.950) 4.00 (0.157) 74.93 (2.950) 5.00 (0.197) 74.93 (2.950) 6.00 (0.236) 74.93 (2.950) 9.04 (0.356) 74.93 (2.950) 4.00 (0.157) 74.93 (2.950) 5.00 (0.197) 74.93 (2.950) 6.00 (0.236) 74.93 (2.950) 9.04 (0.356) øD2 Min 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 1.14 (0.045) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 2.46 (0.097) 1.14 (0.045) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) øD3 Min 2.79 (0.110) 4.32 (0.170) 4.32 (0.170) 2.16 (0.085) 2.16 (0.085) 4.32 (0.170) 4.32 (0.170) 4.32 (0.170) 2.16 (0.085) 2.16 (0.085) 4.32 (0.170) 4.32 (0.170) D-150-0168 1 26-20 Red 80.52 (3.170) D-150-0169 1 20-16 Blue 80.52 (3.170) D-150-0170 1 16-12 Yellow 80.52 (3.170) D-150-0173 2 26-20 Red 105.92 (4.170) D-150-0174 2 26-20 Red 105.92 (4.170) D-150-0175 2 18-16 Blue 105.92 (4.170) D-150-0176 2 14 Yellow 105.92 (4.170) D-150-0177 2 12 Yellow 105.92 (4.170) D-150-0178 3/4 26-20 Red 105.92 (4.170) D-150-0179 3/4 22-20 Red 105.92 (4.170) D-150-0180 3/4 18-16 Blue 105.92 (4.170) D-150-0181 3/4 14-12 Yellow 105.92 (4.170) MATERIALS 1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid. Color: Transparent blue. SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Tin-plated copper alloy with color code stripe. 3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings. Transparent blue. APPLICATION  These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having tin or silver-plated conductors and insulations rated for 135C minimum.  Temperature rating: -55C to +150C.  For installation procedures refer to the applicable sections of TE Connectivity’s Process Standard RCPS 150-02. TITLE: (1 TO 1 SPLICES-CRIMP) SOLDERSHIELD SPLICE KIT, SHIELDED CABLE DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: A.REY ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: 06090 Raychem Devices Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REVISED PER: ECO-18-003345 D-150-0168-0170/0173-0181 REV: DATE: M1 SCALE: March 5, 2018 SIZE: NTS A SHEET: 1 of 1 ©2015-2018 TE CONNECTIVITY CORP. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision.