D-150-1006CS821

CUSTOMER DRAWING Product Name Prod. Rev. D-150-1004 D-150-1005 D-150-1006 D-150-1007 D-150-1008 D-150-1009 D-150-1010 D-150-1011 D-150-1013 D-150-1014 D-150-1016 A A A A A A A A A A A I.D. min 10.0 (0.390) 11.3 (0.445) 13.5 (0.530) 15.0 (0.590) 16.5 (0.650) 18.0 (0.710) 20.0 (0.790) 23.0 (0.905) 26.0 (1.020) 30.0 (1.180) 35.5 (1.400) Splice Dimensions L2 L11.0 Ref. (L10.04) 10.0 (0.390) 34.0 (1.350) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 46.0 (1.800) 14.0 (0.550) 46.0 (1.800) 16.0 (0.630) 60.0 (2.360) 16.0 (0.630) 60.0 (2.360) 16.0 (0.630) 60.0 (2.360) 16.0 (0.630) 60.0 (2.360) 20.0 (0.790) 72.0 (2.830) 20.0 (0.790) 75.0 (2.950) Usable Assembly Diameters Shield Overlap Cable Jacket Cable max min max 9.0 (0.355) 4.0 (0.155) 10.0 (0.390) 10.7 (0.420) 5.0 (0.195) 11.3 (0.445) 12.5 (0.490) 6.0 (0.235) 13.5 (0.530) 14.0 (0.550) 7.0 (0.275) 15.0 (0.590) 15.5 (0.610) 8.0 (0.315) 16.5 (0.650) 17.0 (0.670) 9.0 (0.355) 18.0 (0.710) 19.0 (0.750) 10.0 (0.390) 20.0 (0.790) 22.0 (0.865) 11.5 (0.450) 23.0 (0.905) 25.0 (0.985) 14.5 (0.570) 26.0 (1.020) 28.6 (1.125) 18.5 (0.725) 30.0 (1.180) 34.4 (1.355) 19.5 (0.765) 35.5 (1.400) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, translucent natural, radiation cross-linked thermoplastic, polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 3. SHIELD: Solder impregnated, flux coated copper wire braid. SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004 APPLICATION 1. These parts are designed to make a termination between the shield of a TE Connectivity backshell adapter and the shield of a cable. 2. Parts may be installed with convection (hot-air) heaters. 3. Temperature Range: -55° C to +135° C. Raychem Devices DRAWN BY: M. FORONDA ANGLES: N/A ROUGHNESS IN MICRON DRAWN DATE: ----- SOLDERSHIELD SPLICE DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A TITLE: D-150-10XX TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DOC. ISSUE: CAGE CODE: 06090 PROD. REV.: SEE TABLE ECO NUMBER: ECO-19-018493 © 2018-2019 TE Connectivity. All Rights Reserved. DATE: D2 04-Dec-2019 SCALE: None SIZE: A SHEET: 1 of 1