D-436-0114

CUSTOMER DRAWING 2.24 (.088) MIN 5 PLACES 27.94±1.52 (1.100±.059) Ø6.9 MIN (Ø.272 MIN) Ø8.25 MIN (Ø.325 MIN) 2 1 7.00±0.13 B A MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. MELTABLE INSERT: Low outgassing immersion resistant thermoplastic, color-natural. 3. MULTI-HOLE INSERT: Low outgassing immersion resistant thermoplastic, color-natural. 4. STUB SPLICE: Base Metal: Copper Alloy 102 per ASTM B-75. Plating: Ductile Nickel per QQ-N-290. APPLICATION 1. This part is designed to provide immersion resistant stub splice of multi-conductor cable containing up to 5 wires, 2.16 (0.85) max or 10 wires 1.12 (0.044) max or in-line splices having up to 5 wires, 2.16 (0.085) max or 10 wires 1.12 (0.044) max. on one side and one wire on the other. The diameter of the single wire in the splice shall not be less than 3.18 (.125). 2. Temperature rating: -65C to +175C continuous. 3. Sleeves may be installed by convection heating, crimps use Raychem AD-1377 tool. Dimensions of Stub Splicer: Part Name Prod. CMA Range Rev. D-436-0113 A 779 - 2680 D-436-0114 A 1900 - 6755 A B Color Code 1.70±0.05 (0.067±0.002) 2.54±0.05 (0.100±0.002) 2.62±0.05 (0.103±0.002) 3.81±0.08 (0.150±0.003) Blue Yellow © 2013 TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. TITLE : Raychem Devices UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: T. NGUYEN (5 at 2.24 (0.088) STUB SPLICE SEALING SYSTEM, MULTI-WIRE with SEPARATE INSERT DOCUMENT NO.: D-436-0113/-0114 REVISED PER ECO: REPLACES: 13-015428 DATE: PROD. REV. REVISION: SCALE: October-02-2013 SEE TABLE B2 None If this document is printed it becomes uncontrolled. Check for the latest revision. N/A SIZE: A SHEET: 1 of 1