D-436-58CS246

CUSTOMER DRAWING Product Name D-436-58 D-436-59 Dimensions Of Sub Splicer Color Max. Code Weight Blue 1.4 lbs/Mpcs Yellow 1.8 lbs/Mpcs I.D. CMA Range 10582680 23756755 O.D. min max min max 1.63 (0.064) 2.46 (0.097) 1.75 (0.069) 2.59 (0.102) 2.57 (0.101) 3.73 (0.147) 2.69 (0.106) 3.89 (0.153) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. MELTABLE SEALING INSERT: Modified, immersion resistant thermoplastic. Color: natural. 3. MELTABLE SEALING INSERT: Modified, immersion resistant thermoplastic. Color: natural. 4. SEAMLESS STUB SPLICER: BASE METAL: Copper alloy 101 or 102 per WW-T-775. PLATING: Tin per MIL-T-10727, Type 1. APPLICATION 1. These parts are designed to provide an immersion resistant 2 wire stub splice, or a 2 to 1 parallel splice, made with having insulations rated for 135C minimum. 2. Recovered dimensions of insulation sleeve (Item1): I.D.: .095 (2.4130) Max. Wall: .013 (0.3302) Min. 3. For installation procedures refer to Tyco Electronics/Raychem’s “Miniseal D-436 Series Sealed Crimp Splice Products Installation Guidelines.” TITLE: STUB SPLICE SEALING SYSTEM Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A REVISED BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem Devices Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. ECO NUMBER: DOCUMENT NO.: D-436-58/-59 REV: DATE: J1 SCALE: UNGUYEN 06090 ECO-18-009289 © 2004-2018 TE Connectivity Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. June 14, 2018 SIZE: NTS A SHEET: 1 of 1